Generate QR code
Open Access
Subscription Access
Modernization of digital beam welding scanning
https://doi.org/10.22349/1994-6716-2018-94-2-161-166
Abstract
Instead of outdated GUR-1, scanning electron beam control generator, a modernized system is proposed using digital beam control along special semi-elliptical welding trajectory. The new system has successfully passed approbation when welding aluminum on an ELU-20.
About the Authors
N. I. Sharonov
NRC “UralVagonZavod” – JSC “Central Research Institute of Materials”
Russian Federation
8 Paradnaya St, 191014, St Petersburg
Russian Federation
8 Paradnaya St, 191014, St Petersburg
M. G. Sharapov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr. Sc. (Eng)
49, Shpalernaya St, 191015, St Petersburg
References
1. Mayer, R. E., New high-speed beam current control and defection systems. Advanced electron beam welding – applications, Welding Journal, 1977, V. 56, No 6, pp. 35–41.
2. Akopiyants, K. S., Predotvrashchenie obrazovaniya kornevykh defektov pri elektronnoluchevoy svarke [Preventing the formation of root defects in electron-beam welding], Avtomaticheskaya svarka, 1984, No 6, pp. 59–61.
3. Vasiliev, A. M., Goncharov, V. A., Krivkov, B. G., Soliankin, V. V., Sharonov, N. I., Pribor upravleniya elektronnym puchkom pri svarke [Device for electron beam control in welding], Sudostroitelnaya promyshlennost, Series Svarka, 1988, No 6, pp. 11–12.
4. Zhao, H., Han, Z., Chen, X., Effect of scanning on the formation of the structure of compounds from Ti-6Al-4V in electron-beam welding (School of Materials Science & Engineering, Shenyang University of Technology, Shenyang 110023, PRC), Hanjie xuebao = Trans. China Weld. Inst., 2005, Issue 26, No 1, pp. 78–80.
5. Bayakin, S. G., Laptenok, V. D., Ugriumov, V. G., Analiz i optimizatsiya protsessa svarki skaniruyushchim elektronnym luchom [Analysis and optimization of the welding process by a scanning electron beam], Proceedings of the conference on electron-beam welding, Moscow, 1986, pp. 43–48.
6. Kaydalov, A. A., Elektronno-luchevaya svarka i smezhnye tekhnologii [Electron-beam welding and related technologies], Kiev: Ecotechnologuia, 2004.
7. Olshanskaya, T. V., Yazovskikh, V. Ya., Vliyanie razviortki lucha na formirovaniye makrostruktury metalla shva pri elektronno-luchevoy svarke s glubokim proplavleniyem [Effect of beam development on the formation of the macrostructure of the weld metal in electron-beam welding with deep penetration], Vestnik PSTU, Perm, 1999, pp. 225–230.
8. Turichin, G. A., Valdaitseva, E. A., Klimova, O. G., et al., Mekhanizmy vliyaniya dinamicheskikh protsessov pri vysokoskorostnoy lazernoy, lazerno-dugovoy i elektronno-luchevoy svarke na formirovaniye defektov svarnykh shvov [Mechanisms of the influence of dynamic processes in high-speed laser, laser arc and electron beam welding on the formation of defects in welded joints], Welding and diagnostics, 2015, No 3, pp. 23–27.
9. EVOSPARK – svarochnoe oborudovanie promyshlennogo klassa, izgotovlennoe v Rossii [Welding equipment of industrial class, manufactured in Russia], Mir svarki, 2016, No 1–2 (45–46), pp. 24–25.
10. Kolodyazhny, D. Yu., Gorbach, V. D., Svarochnoe proizvodstvo v sudostroenii [Welding production in shipbuilding], Tsifrovaya evolyutsiya, 2017, No 1(51), pp.15–18.
Review
For citations:
Sharonov N.I., Sharapov M.G. Modernization of digital beam welding scanning. Voprosy Materialovedeniya. 2018;(2(94)):161-166. (In Russ.) https://doi.org/10.22349/1994-6716-2018-94-2-161-166
Views:
376
Email this article 