Generate QR code
Open Access
Subscription Access
Composite alloy based on Co–Cr–Si–Zr–TiB2–BN system for nanostructured powders and functional coatings
https://doi.org/10.22349/1994-6716-2019-98-2-50-56
Abstract
The paper studies the preparation of a composite nanostructured powder manufactured from an alloy of Co–Cr–Si–Zr–TiB2–BN system and describes functional coatings with high microhardness and corrosion resistance based on that powder.
Keywords
composite powder,
adhesion,
microhardness,
microplasma spraying,
supersonic cold gasdynamic spraying,
mechanosynthesis
Supporting agencies: Experimental studies were performed on the equipment of the laboratory of the Test and Technical Complex of Irradiated and Radionuclide Materials and the Center for Collective Use “Composition, Structure and Properties of Structural and Functional Materials” of the NRC “Kurchatov Institute” – CRISM “Prometey”.
About the Authors
A. N. Skvortsova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
T. I. Bobkova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Cand Sc. (Eng)
Russian Federation
Cand Sc. (Eng)
B. V. Farmakovsky
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Cand Sc. (Eng)
Russian Federation
Cand Sc. (Eng)
V. N. Klimov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
A. I. Dmitryuk
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
References
1. Grachev, V.I., Margolin, V.I., Zhabrev, V.A., Tupik V.A., Osnovy sinteza nanorazmernykh chastits i plenok [Fundamentals of the synthesis of nanoscale particles and membranes], Izhevsk: Udmurtiya, 2014.
2. Kovalchuk, M.V., Todua, P.A., Nanotekhnologii, metrologiya, standartizatsiya i sertifikatsiya v terminakh i opredeleniyakh [Nanotechnologies, metrology, standardization and certification in terms and definitions], Moscow: Tekhnosfera, 2009.
3. Patent 2543579, Russian Federation. Cobalt-based Coating Alloy. Farmakovsky, B.V., Deev A.A., Petrauskene, Ya.V., Bobkova, T.I., Kuznetsov, P.A., Yurkov M.A., Vasilyev A.F., Publ. 10.03.2015, Bull. No 7.
4. Gorynin, I.V., Burkhanov, G.S., Farmakovsky, B.V., Perspektivy razrabotok konstruktsionnykh materialov na osnove tugoplavkikh metallov i soedinenii [Prospects for the development of structural materials based on refractory metals and compounds], Voprosy Materialovedeniya, 2012, No 2 (70), pp. 5–17.
5. Alkhimov, A.P., Gulidov, A.I., Kosarev, V.F., Nesterovich N.I., Osobennosti deformirovaniya mikrochastits pri udare o tverduyu pregradu [Features of the deformation of microparticles when striking a solid obstacle], Prikladnaya mekhanika i tekhnicheskaya fizika, 2000, V. 41, No 1, pp. 204– 209.
6. Korovin, A.Ya., Khromov, V.N., Oborudovanie dlya sverkhzvukovogo gazoplamennogo napyleniya pokrytii [Equipment for supersonic flame spraying of coatings], Collection of scientific papers RGAZU (Russian State Agrarian University of correspondence education), 2000, pp. 183–186.
7. Melikhov, I.V., Fiziko-khimicheskaya evolyutsiya tverdogo veshchestva [Physico-chemical evolution of solid materials], Moscow: Binom. Laboratoriya znanii, 2009.
8. Meretukov, M.A., Tsepin, M.A., Vorobev, S.A., Syrkov, A.G., Klastery, struktury i materialy nanorazmera: innovatsionnye i tekhnicheskie perspektivy [Clusters, nano-size structures and materials: innovative and technical perspectives], Moscow: Ruda i metally, 2005.
9. Oryshchenko, A.S., Zagashvili, Yu.V., Kulik, V.I., Proizvodstvo izdeliy iz sovremennykh kompozitsionnykh materialov, modifitsirovannykh nanorazmernymi komponentami [Production of products from modern composite materials modified by nanoscale components], Innovatsii, 2007, No 12, pp. 94–98.
10. Rudskoy, A.I., Petrovich, S.Yu., Cherepanov, V.P., Gopiyenko, V.G., Ivanenko, V.V., Bystrozakalennye materialy i pokrytiya [Fast hardened materials and coatings], Proceedings of the 6th All-Russian with international participation scientific and technical conference in MATI - RSTU. of K. E. Tsiolkovsky “Production and properties of fast-cooled aluminum-based powder alloys”, Moscow, 2007.
11. Gutkin M.Yu, Ovidko, I.A., Defekty i mekhanizmy plastichnosti v nanostrukturnykh i nekristallicheskikh materialakh [Defects and mechanisms of plasticity in nanostructural and non-crystalline materials], St Petersburg: Yanus, 2004.
12. Karabasov, Yu.S., Novye materialy [New materials], Moscow: MISIS, 2002.
13. Malinetsky, G.G., Novoe v sinergetike: Vzglyad v tretye tysyacheletiye [New in synergetics: A look into the third millennium], Moscow: Nauka, 2002.
14. Gorynin, I.V., Malyshevsky, V.A., Farmakovsky, B.V., Projects of Federal State Unitary Enterprise Central Research Institute of Structural Materials “Prometey” in the Field of Structural Nanomaterials, Innovations and Nanotechnologies of Russia, 2012, No 1 (2), pp. 64–68.
15. Gerashchenkov, D.A., Farmakovsky, B.V., Samodelkin, E.A., Gerashchenkova, E.Yu., Issledovanie adgezionnoi prochnosti kompozitsionnykh armirovannykh pokrytii sistemy metall – nemetall, poluchennykh metodom kholodnogo gazodinamicheskogo napyleniya [Researches of adhesive strength of composite reinforced coatings of metal – nonmetal system obtained by «cold» gas-dynamic dusting method], Voprosy Materialovedeniya, 2014, No 2 (78), pp. 103–117.
16. Bobkova, T.I., Sokolova, N.A., Makarov, A.M., Gerashchenkov, D.A., Farmakovsky, B.V., Kombinirovannyi metod polucheniya kompozitsionnykh poroshkovykh materialov i funktsionalnykh pokrytii na ikh osnove [Combined method for obtaining composite powder materials and functional coatings based on it], Voprosy Materialovedeniya, 2018, No 2 (94), pp. 81–87.
17. Skvortsova, A.N., Lycheva, K.A., Voznyakovsky, A.A., Koltsova, T.S., Kompozitsionnye materialy na osnove alyuminiya, uprochnennye uglerodnymi nanovoloknami [Aluminum-based composite materials reinforced with carbon nanofibers], Nauchno-Tekhnicheskie Vedomosti SPbGPU, 2015, No 3 (226), pp. 78–84
18. Gerashchenkov, D.A., Vasilev, A.F., Farmakovsky, B.V., Mashek, A.Ch., Issledovanie temperatury potoka v protsesse kholodnogo gazodinamicheskogo napyleniya funktsionalnykh pokrytii [Researching of flow temperature in cold gas dynamic dusting process of functional coatings], Voprosy Materialovedeniya, 2014, No 1 (77), pp. 87–96.
19. Tonitzki, A., Skvortsova, A.N., Koltsova, T.S., Ganin, V., Danilova, M.A., Shamshurin, A.I., Aluminum-carbon nanofibers composite coating produced by cold spraying, Nauchno-Tekhnicheskie Vedomosti SPbGPU, 2016, No 3 (249), pp. 81–88.
Review
For citations:
Skvortsova A.N., Bobkova T.I., Farmakovsky B.V., Klimov V.N., Dmitryuk A.I. Composite alloy based on Co–Cr–Si–Zr–TiB2–BN system for nanostructured powders and functional coatings. Voprosy Materialovedeniya. 2019;(2(98)):50-56. (In Russ.) https://doi.org/10.22349/1994-6716-2019-98-2-50-56
Views:
206
Email this article 