Generate QR code
Open Access
Subscription Access
Research of weldability of titanium pseudo-β-alloy VST 5553
https://doi.org/10.22349/1994-6716-2019-100-4-124-131
Abstract
The welding properties of argon-arc and electron-beam welding of titanium pseudo-β-alloy of VST 5553 grade are investigated. It is shown that to increase the level of mechanical properties of welded joints, it is necessary to apply heat treatment after welding.
About the Authors
V. P. Leonov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc (Eng)
49, Shpalernaya St, 191015, St Petersburg
V. I. Mikhaylov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc (Eng)
49, Shpalernaya St, 191015, St Petersburg
I. Yu. Sakharov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49, Shpalernaya St, 191015, St Petersburg
S. V. Kuznetsov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49, Shpalernaya St, 191015, St Petersburg
References
1. Ilyin , A.A., Kolachev, B.A., Polkin, I. S ., Titanovye splavy. Sostav, struktura, svoistva [Titanium alloys. Composition, structure, properties]: Reference book, Moscow: VILS-MATI, 2009.
2. Goryn in , I .V., Oryshchenko, A.S., Leonov, V.P., Mikhai lov, V.I . , Kudryav tsev , A.S., Vysokoprochnye titanovye splavy – osnova dlia sozdaniya glubokovodnoy tekhniki [Highstrength titanium alloys as a basis for creating deep-sea equipment], Sudostroenie, 2014, No 3(814), pp. 58–60.
3. Prilutsky, V.P., Shvab, S.L., Petrichenko, I .K. , e t a l . Argonodugovaya svarka titanovogo splava VT22 s ispolzovaniem prisadochnoy poroshkovoy provoloki [Argon-arc welding of VT22 titanium alloy using filler flux-cored wire], Avtomaticheskaya svarka, 2016, No 9(756), pp. 10–14.
4. Tetyukhin, V.V., Zakharov, Yu.I., Levin, I .V., Patent RU 2 169 204 C1: Alloy based on titanium and a method for heat treatment of large-sized semi-finished products from this alloy. Publ. 02.06.2001.
5. Anokhin, S. V., Shvab, S .L., Prisadochnaya poroshkovaya provoloka dlia TIG svarki i naplavki titanovogo splava VT22 [Filler flux-cored wire for TIG welding and surfacing of VT22 titanium alloy], Avtomaticheskaya svarka, 2019, No 6, pp. 39–43.
6. Kudryavtsev, A. S., Kulik, V. P.,Tretyakova, N.V. , e t a l ., Issledovanie fazovogo sostava, struktury i mekhanicheskikh svoystv titanovykh psevdo-beta-splavov [The study of the phase composition, structure and mechanical properties of titanium pseudo-β-alloys], Titan, 2014, No 3 (45), pp. 39–44.
7. Moiseev, V.N., Kulikov, F.R., Karimov, Yu.G, et al ., Svarnye soedineniya titanovykh splavov [Welded joints of titanium alloys], Moscow: Metallurguiya, 1979.
8. Gurevich, S .M. , Kulikov, F .R., Zamkov,V.N.,et a l ., Svarka vysokoprochnykh titanovykh splavov [Welding of high-strength titanium alloys], Moscow: Mashinostroenie, 1975.
9. Gorynin , I .V., Razmyshleniya s optimizmom [Reflections with optimism], St Petersburg: Polytechnic. University, 2014.
10. Lyasotskaya , V.S., Termicheskaya obrabotka svarnykh soyedineniy titanovykh splavov [Heat treatment of welded joints of titanium alloys], Moscow: Eco-Met, 2003.
Review
For citations:
Leonov V.P., Mikhaylov V.I., Sakharov I.Yu., Kuznetsov S.V. Research of weldability of titanium pseudo-β-alloy VST 5553. Voprosy Materialovedeniya. 2019;(4(100)):124-131. (In Russ.) https://doi.org/10.22349/1994-6716-2019-100-4-124-131
Views:
509
Email this article 