Generate QR code
Open Access
Subscription Access
Influence of post-welding tempering on mechanical behavior of friction welded joints from medium-carbon steels during tensile test
https://doi.org/10.22349/1994-6716-2020-102-2-40-49
Abstract
The paper presents an analysis of the mechanical behavior of friction samples of welded joints from steels 30G2 (36 Mn 5) and 40 KhN (40Ni Cr 6), made by rotary friction welding (RFW). The influence of various temperature conditions of postweld tempering on the mechanical properties and deformation behavior during uniaxial tensile testing is analyzed. Vulnerabilities where crack nucleation and propagation occurred in specimens with a welded joint were identified. It was found that with this combination of steels, postweld tempering of the welded joint contributes to a decrease in the integral strength characteristics under conditions of static tension along with a significant decrease in the relative longitudinal deformation of the tested samples.
Keywords
rotary friction welding (RFW),
thermomechanical affected zone (TMAZ),
medium carbon steels,
uniaxial tension,
tensile strength,
deformation
Supporting agencies: The reported study was funded by RFBR, project number 19-38-90079.
About the Authors
A. S. Atamashkin
Orenburg State University
Russian Federation
13 Pobedy Ave, 460018, Orenburg
Russian Federation
13 Pobedy Ave, 460018, Orenburg
E. Yu. Priymak
Orenburg State University;
Drill Industries
Russian Federation
Russian Federation
Cand Sc. (Eng)
13 Pobedy Ave, 460018, Orenburg;
118 Pobedy Ave, 460026, Orenburg
N. V. Firsova
Orsk Institute of Humanities and Technology, Branch of the Orenburg State University
Russian Federation
Russian Federation
Cand Sc. (Eng)
15A Mira Ave, 462403, Orsk
References
1. Author’s certificate SU 195846 A1: Klimenko, Yu.V., The method of welding metals by friction, Publ. May 4, 1965. Bull. No 10.
2. Ramesh, A.P., Subramaniyan, M., Eswaran, P., Review on Friction Welding of Similar/Dissimilar Metals, Journal of Physics: Conference Series, 2019, V.1362 (1). DOI:10.1088/1742-6596/1362/1/012032.
3. Shinde, G., Dabeer, P., Review of Experimental Investigations in Friction Welding Technique, IRA-International Journal of Technology & Engineering, 2017, pp. 373–384. DOI: 10.21013/jte.ICSESD201736.
4. Chainarong, S., Meengam, C., Tehyo, M., Rotary Friction Welding of Dissimilar Joints between SSM356 and SSM6061 Aluminium Alloys Produced by GISS, Engineering Journal, 2017, V. 21, No 1, pp. 181–191. DOI:10.4186/ej.2017.21.1.181.
5. TU 3668-002-01423045-2008 (Specification): Truby burilnye stalnye universalnye (Universal steel drill pipes), Rostekhregulirovanie, 2018.
6. Lachinyan, L. A., Rabota burilnoy kolonny [Drill string operation], Moscow: Nedra, 1992.
7. Iracheta, O., Bennett, C.J., Sun, W., A sensitivity study of parameters affecting residual stress predictions in finite element modelling of the inertia friction welding process, International Journal of Solids and Structures, 2015, V. 71, pp. 180–193. http://dx.doi.org/10.1016/j.ijsolstr.2015.06.018.
8. Dong, H., Li, Y., Li, P., Hao, X., Xia, Y., Yang, G.,Inhomogeneousmicrostructure and mechanical properties of rotary friction welded joints between 5052 aluminum alloy and 304 stainless steel, Journal of Materials Processing Tech.,2019,V. 272, pp. 17–27. https: www.doi.org/10.1016/j.jmatprotec. 2019.04.039.
9. Li, P., Dong, H., Xia, Y., Hao, X., Wang, S., Pan, L.,Zhou, J., Inhomogeneous interface structure and mechanical properties of rotaryfriction welded TC4 titanium alloy/316L stainless steel joints, Journal of Manufacturing Processes, 2018, V. 33, June, pp. 54–63. https: www.doi.org/10.1016 /j.jmapro.2018.05.001.
10. Atamashkin, A.S., Priymak, E.Yu., Kuzmina, E.A., Evoliutsiya struktury i mekhanicheskikh svoistv svarnykh soedineniy, vypolnennykh rotatsionnoy svarkoy treniem, pri nagreve [Evolution of the structure and mechanical properties of welded joints made by friction rotational welding during heating], Mashinostroenie: network electronic scientific journal, 2019, V. 7, No 1, pp. 14–18. DOI: 10.24892/RIJIE/2019010311.
11. GOST R 50278-92: State Standard of the Russian Federation: Drill pipes, with weld-on tool joints: Specifications, Moscow: Standartinform, 2010.
12. Ivashko, V.V., Kirilenko, O.M., Wegera, I.I., Semenov, D.A., Issledovanie vliyaniya rezhimov termicheskoy obrabotki na strukturu i mekhanicheskie svoistva goryachekatanykh trub, izgotovlennykh iz stali 32G2 [Investigation of the influence of heat treatment on the structure and mechanical properties of hot-rolled pipes made of 32G2 steel], Litye i metallurgiya, 2011, No 4 (63), pp. 108–114.
13. Priymak, E.Yu., Yakovleva, I.L., Tereshchenko, N.A., Stepanchukova, A.V., Morozova, A.N.,EvolutionoftheStructureandMechanismoftheFormationofWeldedJointsofMedium-Carbon Steelsupon Rotary Friction Welding, Physics of Metals and Metallography, 2019, V. 120, No 11, pp. 1187–1192.
14. Kuzmina, E.A., Priymak, E.Yu., Influence of forging force on the formation of the structure and mechanical properties of medium carbon steels welded joints in rotary friction welding, Vektor nauki Tolyattinskogo gosudarstvennogo universiteta (Togliatti State University), 2019, No 2, pp. 34–42.
15. Selvamani, S.T., Palanikumar, K., Optimizing the friction welding parameters to attain maximum tensile strength in AISI 1035 grade carbon steel rods, Measurement, 2014, V. 53, pp. 10–21. http://dx.doi.org/10.1016/j.measurement.2014.03.008.
16. Emre, H.E., Kaçar, R., Fatigue behavior of friction welded drill pipes, Journal of the Faculty of Engineering and Architecture of Gazi University, 2013, V. 28, No 2, pp. 417–426.
Review
For citations:
Atamashkin A.S., Priymak E.Yu., Firsova N.V. Influence of post-welding tempering on mechanical behavior of friction welded joints from medium-carbon steels during tensile test. Voprosy Materialovedeniya. 2020;(2(102)):40-49. (In Russ.) https://doi.org/10.22349/1994-6716-2020-102-2-40-49
Views:
295
Email this article 