Generate QR code
Open Access
Subscription Access
Tribotechnical characteristics of hard alloys in sliding friction units
https://doi.org/10.22349/1994-6716-2020-102-2-87-97
Abstract
The paper presents experimental data on the study of the friction parameters of hard alloys in sliding friction units, including the heating temperature, surface roughness, wear and friction coefficient, depending on the duration of the test and the friction path.
About the Authors
K. D. Khromushkin
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
B. G. Ushakov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
A. V. Kochergin
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
R. A. Suleev
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
O. N. Parmenova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. Pronikov, A.S., Nadezhnost mashin [Machine reliability], Moscow: Mashinostroenie, 1978.
2. Kiparisov, S.S., Levinsky, O.Ya., Petrov, A.P., Karbid titana (poluchenie, svoistva i primenenie) [Titanium carbide (preparation, properties and application)], Moscow: Metallurgiya, 1987.
3. Eyduk, O.N., et al., Proizvodstvo i primenenie tverdykh splavov [Production and applications of hard alloys], Moscow: Metallurgiya, 1981.
4. Marukovich, E.I., Karpenko, M.I., Iznosostoikie splavy [Wear-resistant alloys], Moscow: Mashinostroenie, 2005.
5. Drozdov, Yu.N., Pavlov, V.G., Puchkov, V.N., Trenieiiznos v ekstremalnykh usloviyakh [Friction and wear under extreme conditions]: Reference book, Moscow: Mashinostroenie, 1986.
6. Tolstov-Antsiferov, I.A.,Iznosostoikienaplavochnyematerialy [Wear-resistant surfacing materials], Moscow: Mashinostroenie, 2005.
7. Demkin, N.B., Ryzhov, E.V., Kachestvo poverkhnosti i kontakt detaley mashin [Surface quality and machine parts contact], Moscow: Mashinostroenie, 1981.
8. GOST 30480-97: State standard. Obespechenie iznosostoykosti izdeliy. Metody ispytaniy na iznosostoykost. Obshchie trebovaniya [Ensuring wear resistance of products. Test methods for wear resistance. General requirements], Moscow: Standards publishing house, 1998.
9. Spijker, P., Anciaux, G., Molinari, J.F., Relations between roughness, temperature and dry sliding friction at the atomic scale, Tribology International, 2013, V. 59, pp. 222–229.
10. Blau, P., The significance and use of the friction coefficient, Tribology International, 2001, V. 34, pp. 585–591.
11. Person, B. N., Albohr, O., Tartaglino, U., Volokitin, A., Tosarti, E., On the nature of surface roughness with application to contact mechanics, sealing rubber friction and adhesion, Journal of Physics: Condensed Matter, 2005, V. 17.
12. Spijker, P., Anciaux, G., Molinari, J.F., Dry sliding contact between rough surfaces at the atomistic scale, Tribology Letters, 2011, V. 44, pp. 279–285.
13. Burwell, J.T., Kaye, J., Nijmegen, D.W., Morgan, D.A., Journal Appl. Mech, 1941, V. 8, No 2.
14. Pruzhansky, L.Yu, Natchuk, A.I., Issledovanie vliyaniya sherokhovatosti stalnoy poverkhnosti na iznos nekotorykh kompozitnykh materialov na osnove ftoroplasta-4 [Investigation of the effect of roughness of a steel surface on the wear of some composite materials based on fluoroplast-4],Trenie, iznashivanieikachestvopoverkhnosti, Moscow: Nauka, 1973, pp. 90–103.
15. Zhigaev, V.D.,Nasirov, S.M.,O mikrogeometrii poverkhnostey treniya pri iznashivanii abrazivnoy prosloykoy [On the microgeometry of friction surfaces during wear by an abrasive layer], Trenie, iznashivanie i kachestvo poverkhnosti, Moscow: Nauka, 1973, pp. 104–106.
16. Khrushchev, M.M., Pruzhansky, L.Yu., Integralnaya otsenka istirayushchey sposobnosti stalnoy obrabotannoy poverkhnosti [Integral abrasion rating of steel machined surface], Trenie, iznashivanie i kachestvo poverkhnosti, Moscow: Nauka, 1973, pp. 107–118.
17. GOST 27964-88: State standard. Izmerenie parametrov sherokhovatosti [Roughness Measurement], Moscow: Standards publishing house, 1990.
Review
For citations:
Khromushkin K.D., Ushakov B.G., Kochergin A.V., Suleev R.A., Parmenova O.N. Tribotechnical characteristics of hard alloys in sliding friction units. Voprosy Materialovedeniya. 2020;(2(102)):87-97. (In Russ.) https://doi.org/10.22349/1994-6716-2020-102-2-87-97
Views:
276
Email this article 