Generate QR code
Open Access
Subscription Access
Unifying chemical compositions of high-strength steels in shipbuilding
https://doi.org/10.22349/1994-6716-2018-93-1-07-14
Abstract
The problems of creation of structural high-strength steels of unified chemical composition and production technologies ensuring the yield point in the range of 590–950 MPa have been considered. The possibility of obtaining such materials appeared after extensive studies on the Gleeble 3800 thermomechanical simulator and Quarto 800 laboratory mill confirming the possibility of unifying chemical compositions of high-strength steels with adjustable yield strength within the specified limits. Given the identity of the results of steel treatment on the mentioned equipment and Quarto 5000 industrial mill, the results achieved in the present work could be realized in industry.
Keywords
Supporting agencies: Experimental studies were carried out on the equipment of the Center for the Collective Use of scientific equipment “Composition, structure and properties of structural and functional materials” of the National Research Center “Kurchatov Institute” – CRISM Prometey with the financial support of the Ministry of Education and Science under the agreement No. 14.595.21.0004, the unique identifier RFMEFI59517X0004.
About the Authors
M. V. Kovalchuk
National Research Center “Kurchatov Institute”
Russian Federation
Russian Federation
Corresponding Member of the RAS
1, Akademika Kurchatova Sq. 123182 Moscow
A. S. Oryshchenko
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc. (Eng)
49, Shpalernaya St, 191015, St Petersburg
V. A. Malyshevsky
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc. (Eng)
49, Shpalernaya St, 191015, St Petersburg
S. N. Petrov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc. (Chem)
49, Shpalernaya St, 191015, St Petersburg
E. A. Shumilov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49, Shpalernaya St, 191015, St Petersburg
Russian Federation
49, Shpalernaya St, 191015, St Petersburg
References
1. Kovalchuk, M.V., Oryshchenko, A.S., Malyshevsky, V.A., Petrov, S.N., Shumilov, E .A ., Problemy sozdaniya tekhnologichnykh ekonomnolegirovannykh vysokoprochnykh staley dlya arkticheskikh konstruktsiy [Problems of creation of technological economically alloyed high-strength steels for arctic constructions], Voprosy Materialovedeniya, 2017, No 2 (90), pp. 7–14.
2. Gorynin, I.V., Malyshevsky, V.A., Rybin, V.V., Vysokoprochnye svarivaemye korpusnye stali dlya nadvodnogo korablestroyeniya: vchera, segodnya, zavtra [High-strength welded hull steels for surface shipbuilding: yesterday, today, tomorrow], Rol rossiyskoy nauki v sozdanii otechestvennogo podvodnogo flota, Moscow: Nauka, 2008, pp. 281–288.
3. Gorynin, I.V., Khlusova E.I., Nanostrukturirovannye stali dlya osvoeniya mestorozhdeniy shelfa Severnogo Ledovitogo okeana [Nanostructured steels for the development of the deposits of the shelf of the Arctic Ocean], Vestnik RAN [Bulletin of the Russian Academy of Sciences], 2010, No 2, pp.1069–1075.
4. Hanlon, D.N., Sietsma, J., Vander Zwaag, S., The effect of plastic deformation of austenite on the kinetics of subsequent ferrite formation, ISIJ International, 2001, V. 41, Issue 9, pp. 1028–1036
5. Zisman, A.A., Petrov, S.N., Ptashnik, A.V., Kolichestvennaya attestatsiya beynitnomartensitnykh struktur vysokoprochnykh staley metodami skaniruyushchey elektronnoy mikroskopii [Quantitative attestation of bainitic-martensitic structures of high-strength steels by scanning electron microscopy methods], Metallurg, 2014, No 11, pp. 91–95.
Review
For citations:
Kovalchuk M.V., Oryshchenko A.S., Malyshevsky V.A., Petrov S.N., Shumilov E.A. Unifying chemical compositions of high-strength steels in shipbuilding. Voprosy Materialovedeniya. 2018;(1(93)):7-14. (In Russ.) https://doi.org/10.22349/1994-6716-2018-93-1-07-14
Views:
371
Email this article 