Generate QR code
Open Access
Subscription Access
Research of the peculiarities of ruthenium distribution in titanium α-, pseudo-α- and pseudo-β-alloys and its effects on corrosion resistance
https://doi.org/10.22349/1994-6716-2020-103-3-39-52
Abstract
The structure of deformed semi-finished products (forgings) from titanium alloys of Ti–Al–Zr + 0.15% Ru, Ti–Al–V– Mo + 0.15% Ru, Ti–Al–V–Cr–Fe–Mo + 0.15% Ru systems has been investigated. The basic mechanical properties, microstructure, results of local elemental and phase analyses obtained by X-ray spectral microanalysis and backscattered electron diffraction, as well as a model of the effect of ruthenium on increasing corrosion resistance of titanium alloys of various classes are presented.
About the Authors
V. P. Leonov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sci. (Eng)
49 Shpalernaya St, 191015 St Petersburg
E. V. Chudakov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sci.(Eng)
49 Shpalernaya St, 191015 St Petersburg
Yu. Yu. Malinkina
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
N. V. Tretyakova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
S. N. Petrov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sci. (Chem)
49 Shpalernaya St, 191015 St Petersburg
A. V. Tsemenko
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
E. A. Vasilieva
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. Leonov, V.P., Kopylov, V.N., Lukyanova, T.A., Martynov, K.G., Rtischeva, L.P., Shtutsa, M.G., Karpov, Yu.S., Osvoenie proizvodstva goryachedeformirovannykh trub iz titanovykh splavov v AO CHMZ [Mastering the production of hot-deformed pipes from titanium alloys at ChMP JSC], Titan, 2015, No 4 (50), pp. 37; 52.
2. Oryshchenko, A.S., Leonov, V.P., Kopylov, V.N., Rtischeva, L.P., Martynov, K.G., Sovremennoe sostoyanie proizvodstva i primenenie trub iz titanovykh splavov v atomnoy energetike i sudostroenii [The current state of production and the use of pipes from titanium alloys in nuclear power and shipbuilding], Titan, 2018, No 3 (61), pp. 21; 60.
3. Leonov V.P., Kopylov V.N., Rtischeva L.P., Shtutsa M.G., Smirnov V.G., Karpov Yu. S. Razrabotka i osvoenie proizvodstva kholodnodeformirovannykh trub iz titanovykh splavov v OAO ChMZ [Development and production of cold-deformed pipes from titanium alloys at JSC ChMP], Titan, 2014, No 3 (45), pp. 17–18.
4. Klimov, Yu.S., Serdyuk, O.F., Povyshenie nadezhnosti paroturbinnoy ustanovki atomnogo ledokola pri ispolzovanii zamknutoy vodovozdushnoy sistemy okhlazhdeniya [Improving the reliability of the steam turbine installation of a nuclear icebreaker using a closed water-air cooling system], Sudostroenie,1992, No 2, pp. 17–18.
5. Pashin, V.M., Problemy, trebuyushchie neotlozhnogo resheniya [Problems requiring urgent solutions], Sudostroenie, 2010, No 6, pp. 3–8.
6. Kashka, M.M., Mantula, N.V., Ponomatenko, A.V., Opyt i perspektivy ekspluatatsii v Arktike atomnogo ledokolnogo flota Rossii [Experience and prospects of exploitation of the Russian nuclear icebreaker fleet in the Arctic], Arktika: ekologiya i ekonomika, 2012, No 3 (7), p. 110.
7. Scherbinin, V.F., Leonov, V.P., Malinkina, Yu.Yu., Increase in corrosion resistance of titanium alloy in concentrated aqueous solutions of chlorides at high temperatures, Inorganic Materials: Applied Research, 2013, V. 4, No 6, pp. 537–541.
8. Leonov, V.P., Chudakov, E.V., Malinkina, Yu.Yu., The influence of micro additives of Ru on the structure, corrosive-mechanical strength and fractography of destruction of pseudo-alpha-Ti alloys, Inorganic Materials: Applied Research, 2017, V. 8, No 4, pp. 556–565.
9. Malinkina, Yu.Yu., Ispolzovanie ruteniya dlya povysheniya korrozionnoy stoykosti v agressivnykh sredakh promyshlennykh splavov titana [Using ruthenium to improve corrosion resistance in aggressive environments of industrial titanium alloys], Voprosy Materialovedeniya, 2011, No 1 (65), pp. 162–166.
10. Leonov, V.P., Chudakov, E.V., Kulik, V.P., Malinkina, Yu.Yu., Tretyakova, N.V., Vliyanie korrozionno-aktivnoy sredy na vyazkost razrusheniya titanovykh splavov psevdo-в klassa [Effect of a corrosive-active medium on the fracture toughness of titanium alloys of the pseudo-в class], Novosti Materialovedeniya. Nauka i tekhnika, 2015, No 6, pp. 24–33, www.materialsnews.ru
11. Ilyin, A.A., Kolachev, B.A., Polkin, I.S., Titanovye splavy. Sostav. Struktura. Svoystva [Titanium alloys Composition. Structure. Properties]: Directory, Moscow: VILS – MATI, 2009.
12. Aviatsionnye materialy [Aviation materials], Vol. 6: Titanium alloys / Ed. acad. RAS E.N. Kablov, Moscow, 2010.
13. Tomashov, N.D., Titan i korrozionno-stoykie splavy na ego osnove [Titan and corrosionresistant alloys on its basis], Moscow: Metallurguia, 1985.
14. Raevskaya, M.V., Sokolovskaya, E.M., Fizikokhimiya ruteniya i ego splavov [Physical chemistry of ruthenium and its alloys], Moscow: Publishing house of Moscow University, 1979.
Review
For citations:
Leonov V.P., Chudakov E.V., Malinkina Yu.Yu., Tretyakova N.V., Petrov S.N., Tsemenko A.V., Vasilieva E.A. Research of the peculiarities of ruthenium distribution in titanium α-, pseudo-α- and pseudo-β-alloys and its effects on corrosion resistance. Voprosy Materialovedeniya. 2020;(3(103)):39-52. (In Russ.) https://doi.org/10.22349/1994-6716-2020-103-3-39-52
Views:
4456
Email this article 