Generate QR code
Open Access
Subscription Access
Increasing the short-term mechanical properties of nickel alloys of grades SLZhS5-VI and ZhS32-VI due to program hardening combined with the aging process
https://doi.org/10.22349/1994-6716-2020-103-3-53-60
Abstract
A method for improving the mechanical properties of nickel monocrystalline alloys of the SLZhS5VI and ZhS32-VI brands used for gas turbine blades by means of program hardening combined with aging is considered. The mechanical properties of nickel alloys of grades SLZhS5-VI and ZhS32-VI after homogenization, quenching and aging, combined with programmed hardening, have been determined.
About the Authors
M. I. Olenin
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sci. (Eng)
49 Shpalernaya St, 191015 St Petersburg
V. I. Gorynin
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sci. (Eng)
49 Shpalernaya St, 191015 St Petersburg
A. Turkboev
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sci. (Eng)
49 Shpalernaya St, 191015 St Petersburg
V. V. Makhorin
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. Gindin, I.A., Neklyudov, I.M., Fizika programmnogo uprochneniya [Physics of programmed hardening], Kiev: Naukova Dumka, 1979.
2. Kondratov, V.K., Skvortsov, A.I., Zavisimost fiziko-mekhanicheskikh svoystv martensitno-stareyushchikh staley ot protsessa stareniya [Dependence of the physical and mechanical properties of open-hearth-aging steels on the aging process], MiTOM, 1975, No 9, pp. 18–21.
3. Alekseeva, L.Ye., Suvorov, S.O., Otpusk pod napryazheniyem zakalennoy stali [Temperingunder tension of hardened steel], Problemy metallov i fizika metallov, 1972, No 4, pp. 182–190.
4. Pastukhova, Zh.V., Primenenie dinamicheskogo stareniya dlya povysheniya nadezhnosti izdeliy iz korrozionno-stoykikh martensitno-stareyushchikh staley [Application of dynamic aging to improve the reliability of products made of corrosion-resistant maraging steels], Methodical recommendations of a short-term seminar (November 26–27, 1985),Leningrad House of Scientific and Technical Propaganda, 1987, pp. 15–18.
5. Entin, R.I., Gindin, I.A., Sarrak, V.I., Vliyanie programmnogo nagruzheniya na mekhanicheskie svoistva konstruktsionnykh staley [Influence of programmed loading on the mechanical properties of structural steels], FMM, 1970, V. 29, No 6, pp. 1215–1220.
6. Bodyako, M.N., Astapchik, S.A., Yaroshevich,G.B., Martensitno-stareyushchiye stali [Martensite aging steels], Minsk: Nauka i tekhnika, 1975.
7. Utevsky, L.M., Difraktsionnaya elektronnaya mikroskopiya v metallovedenii [Diffraction electron microscopy in metal science], Moscow: Metallurguia, 1973.
8. Neklyudov, I.M., Kamyshanchenko, N.V., Programmnoe uprochnenie materialov [Programmed hardening of materials], Nauchnye vedomosti, 2005, No 2, Issue 11, pp. 117–130.
9. Pastukhova, Zh. P., Rakhshtadt, A.G., Kaplun, Yu.A., Dinamicheskoe starenie splavov [Dynamic aging of alloys], Moscow: Metallurguia, 1985.
10. Neklyudov, I.M., Starodubtsev, Ya.D., Sokolenko, V.I., Vliyanie magnitnykh poley na soprotivlenie plasticheskoy deformatsii kristallicheskikh tel [Influence of magnetic fields on the resistance of plastic deformation of crystalline bodies], Ukrainian Physical Journal, 2005, V. 50, No 8, pp. 113–121.
11. Guryanov, G.N., Smirnov, S.V., Zuev, B.M., Vliyanie metodov uprochneniya dispersionno-tverdeyushchego splava EP-543U na osnovnye pokazateli kachestva provolochnykh pruzhin [Influence of methods of hardening dispersion-hardening alloy EP-543U on the main indicators of the quality of wire springs], Kachestvo i obrabotka materialov, 2014, No 2, pp. 52–57.
12. Gorelik, S.S., Rastorguev, L.N., Skakov, Yu.N., Rentgenostrukturnyy analiz [X-ray structural analysis], Moscow: Metallurgy, 1970.
13. Lebedev, T.A., Olenin, M.I., Termicheskaya pravka trub iz martensitno-stareyushchikh staley [Thermal straightening of pipes from maraging steels], MiTOM, No 10, 1985, pp. 46–47.
14. Olenin, M.I., Primenenie fazovoy sverkhplastichnosti dlya pravki tonkostennykh izdeliy iz martensitno-stareyushchikh staley [Application of phase superplasticity for straightening thin-walled products from maraging steels], Tekhnologiya mashinostroeniya, 2012, No 10 (124), pp. 8–10.
15. Neklyudov, I.M., Sokolenko, V.I., Netesov, V.M., Razvitiye v KhFTI metodov napravlennogo izmeneniya struktury i svoistv konstruktsionnykh materialov pri aktivizatsii relaksatsionnykh protsessov [Development at Kharkov Institute of Physics and Technology of methods of directed changes in the structure and properties of structural materials during activation of relaxation processes]: Review dedicated to the 80th anniversary of the Kharkov Institute of Physics and Technology, Uspekhi fiziki metallov, 2008, V. 9, pp. 171–193.
16. Tien, J.K., Copley, S.M., The Effect of Uniaxial Stress on the Periodic Morphology of Coherent Gamma Prime Precipitates in Nickel-Base Superalloy Crystals, Metallurgical Transactions, 1971, V. 2, No 1, pp. 215–219.
17. Tien, J.K., Copley, S.M., The Effect of Orientation and sense of applied uniaxial stress on the morphology of coherent gamma prime precipitates in stress annealed nickel-base superalloy crystals, Metallurgical Transactions, 1971, V. 2, No 2, pp. 543–553.
18. Starostina, N.V.,Vliyanie vneshnikh uprugikh nagruzok na kinetiku razvitiya mikrostruktury monokristallov dispersionno-tverdeyushchikh splavov na osnove nikelya [Influence of external elastic loads on the kinetics of microstructure development of monocrystals of precipitation-hardening alloys based on nickel], Thesis for Cand. Eng. Sci., KSTU (Kursk University), 2008.
19. Monastyrskaya, E.V., Morozova, G.I., Vlasov, Yu.B., Struktura, fazovy sostav i svoistva korrozionno-stoykogo zharoprochnogo splava ChS88U [Structure, phase composition and properties of corrosion-resistant heat-resistant alloy ChS88U], MiTOM, 2006, No 8, pp. 39–44.
20. Getsov, L.B., Materialy i prochnost detaley gazovykh turbin [Materials and strength of gas turbine parts], Rybinsk: Gazoturbinnye tekhnologii, 2010, Book 1.
21. Olenin M.I., Gorynin V.I., Makhorin V.V., Povyshenie khladostoykosti stali marki 09G2S za schet programmnogo uprochneniya, sovmeshchennogo s dopolnitelnym srednetemperaturnym otpuskom [Improving the cold resistance of 09G2S steel due to program hardening combined with additional medium temperature tempering], Voprosy Materialovedeniya, 2020, No 1 (101), pp. 27–34.
Review
For citations:
Olenin M.I., Gorynin V.I., Turkboev A., Makhorin V.V. Increasing the short-term mechanical properties of nickel alloys of grades SLZhS5-VI and ZhS32-VI due to program hardening combined with the aging process. Voprosy Materialovedeniya. 2020;(3(103)):53-60. (In Russ.) https://doi.org/10.22349/1994-6716-2020-103-3-53-60
Views:
440
Email this article 