Generate QR code
Open Access
Subscription Access
Development of composite powders and coatings for protection and restoration of products under significant temperature exposure during operation
https://doi.org/10.22349/1994-6716-2020-103-3-70-78
Abstract
The paper presents results of studies aimed at expanding the range of domestic powder composites for thermal spraying of coatings with great number of performance characteristics used in the power engineering industry. Experimental data on the synthesis of nanostructured powders based on a titanium matrix and reinforced with ceramic nanopowders are presented. Some properties of sprayed coatings are investigated.
About the Authors
T. I. Bobkova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
A. A. Grigoriev
Peter the Great St Petersburg Polytechnic University
Russian Federation
Russian Federation
Cand Sc. (Eng)
29 Polytekhnicheskaya St, 195251 St Petersburg
D. S. Zhirov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. Karabasov, Yu.S., Novye materialy [New materials], Moscow: MISIS, 2002.
2. Rogov, V.A., Soloviev, V.V., Kopylov, V.V., Novye materialy v mashinostroenii [New materials in mechanical engineering], Moscow: RUDN University, 2008
3. Shekhtman, S.R., Issledovanie ekspluatatsionnykh svoystv materialov lopatok kompressora s vakuumnymi nanostrukturirovannymi ionno-plazmennymi pokrytiyami na osnove Ti-C-Si [Study of the performance properties of materials for compressor blades with vacuum nanostructured ion-plasma coatings based on Ti-C-Si], Vestnik UGATU (Ufa University), V. 14, No 5 (40), pp. 75–78.
4. Atamanov, M.V., Guseva, M.I., Martynenko, Yu.V., Mitin, A.V., Mitin, V.S., Moskovkin, P.G., Shiryaev, S.A., Struktura i adgeziya pokrytiya (TiAl)N na nerzhaveyushchey stali [Structure and adhesion of (TiAl) N coating on stainless steel], Metally, 2002, No 4, pp. 81–88.
5. Koshuro, V.A., Fomin, A.A., Microtexturing and nanostructuring of the surface of titanium and its alloy using spark alloying with tantalum and subsequent oxidation, Tenth International Vacuum Electron Sources Conference (IVESC), IEEE, 2014, p. 145.
6. Yakovchuk, K.Yu., Teploprovodnost i termotsiklicheskaya dolgovechnost kondensatsionnykh termobariernykh pokrytiy [Thermal conductivity and thermal cyclic durability of condensation thermal barrier coatings], Sovremennaya elektrometallurgiya, 2014. No 4, pp. 25–31.
7. Zhong, X., Zhao, H., Zhou, X., et al., Thermal shock behaviour of toughened gadolinium zirconate. YSZ double-layered thermal barrier coating, Journal of Alloy and Compounds, 2014, No 593, pp. 50–55.
8. Slifka, A.J., Filla, B.J., Thermal conductivity measurement of an electron-beam physical-vapordeposition coating, Journal of Research of the National Institute of Standards and Technology, 2003, V. 108, pp. 147–150.
9. Muboyadzhan, S.A., Zashchitnye pokrytiya dlya detaley goryachego trakta GTD [Protective coatings for gas turbine engine hot section parts], VIAM, 2010-205674, p. 12. URL: https://www.viam.ru/public/files/2010/2010-205674.pdf
10. Alkhimov, A.P., Klinkov, S.V., Kosarev, V.F., Fomin, V.M., Kholodnoe gazodinamicheskoe napylenie [Cold gas dynamic spraying], FIZMATLIT, 2010.
11. Spektor, Yu.E., Eromasov, R.G., Tekhnologiya naneseniya pokrytiy i svoystva pokrytiy [Coating technology and coating properties], Krasnoyarsk, 2008.
12. Borisov, Yu.S., Pereverzev, Yu.N., Voynarovich, S.G., Bobrik, V.G., Nanesenie uzkopolosnykh pokrytiy metodom mikroplazmennogo napyleniya [Application of narrow-band coatings by microplasma spraying], 1999, No 02, Avtomaticheskaya svarka, pp. 53–55.
13. Gorynin, I.V., Oryshchenko, A.S., Farmakovsky, B.V., Kuznetsov, P.A., Perspektivnye issledovaniya i razrabotki nauchnogo nanotekhnologicheskogo tsentra FGUP TSNII KM Prometey v oblasti novykh nanomaterialov [Prospective research and development of the nanotechnology center of the FSUE Central Research Institute of Prometey in the field of new nanomaterials], Voprosy Materialovedeniya, 2014, No 2 (78), pp. 118–126.
14. Bobkova, T.I., Deev, A.A., Bystrov, R.Yu., Farmakovsky, B.V., Nanesenie iznosostoykikh pokrytiy s reguliruemoy tverdostyu s pomoshchyu sverkhzvukovogo kholodnogo gazodinamicheskogo napyleniya [Application of wear-resistant coatings with adjustable hardness using supersonic cold gas-dynamic spraying], Metalloobrabotka, No 5–6 (71–72), 2012, pp. 45–49.
15. Sholkin, S.E., Yurkov, M.A., Sozdanie upravlyaemoy nanostruktury v pokrytii, poluchennom metodami gazotermicheskogo napyleniya [Creation of a controlled nanostructure in a coating obtained by thermal spraying methods], Voprosy Materialovedeniya, 2010, No 2 (62), pp. 68–74.
Review
For citations:
Bobkova T.I., Grigoriev A.A., Zhirov D.S. Development of composite powders and coatings for protection and restoration of products under significant temperature exposure during operation. Voprosy Materialovedeniya. 2020;(3(103)):70-78. (In Russ.) https://doi.org/10.22349/1994-6716-2020-103-3-70-78
Views:
294
Email this article 