Generate QR code
Open Access
Subscription Access
High-temperature carbon plastics based on thermoreactive polyimide binder
https://doi.org/10.22349/1994-6716-2020-103-3-89-102
Abstract
The article presents results of studies of experimental carbon plastics based on thermosetting PMRpolyimide binder. Сarbon fiber reinforced plastics (CFRPs) are made from prepregs prepared by melt and mortar technologies, so the rheological properties of the polyimide binder were investigated. The heat resistance of carbon plastics was researched and its elastic-strength characteristics were determined at temperatures up to 320°С. The fundamental possibility of manufacturing carbon fiber from prepregs based on polyimide binder, obtained both by melt and mortar technologies, is shown. CFRPs made from two types of prepregs have a high glass transition temperature: 364°C (melt) and 367°C (solution), with this temperature remaining at the 97% level after boiling, and also at approximately the same (86–97%) level of conservation of elastic strength properties at temperature 300°С.
Keywords
polymer matrix composites,
high temperature carbon fiber reinforced plastics,
carbon fabric,
polyimide binder,
prepreg,
melt technology,
mortar technology
Supporting agencies: The research was carried out within the framework of the implementation of the integrated scientific direction 13: Polymeric composite materials (“Strategic directions for the development of materials and technologies for their processing up to 2030”).
About the Authors
M. I. Valueva
All-Russian Scientific Research Institute of Aviation Materials (VIAM)
Russian Federation
Russian Federation
Cand Sc. (Eng)
17 Radio St, 105005 Moscow
I. V. Zelenina
All-Russian Scientific Research Institute of Aviation Materials (VIAM)
Russian Federation
17 Radio St, 105005 Moscow
Russian Federation
17 Radio St, 105005 Moscow
M. A. Zharinov
All-Russian Scientific Research Institute of Aviation Materials (VIAM)
Russian Federation
17 Radio St, 105005 Moscow
Russian Federation
17 Radio St, 105005 Moscow
M. A. Khaskov
All-Russian Scientific Research Institute of Aviation Materials (VIAM)
Russian Federation
Russian Federation
Cand Sc. (Chem)
17 Radio St, 105005 Moscow
References
1. Kablov, E.N., Materialy novogo pokoleniya – osnova innovatsiy, tekhnologicheskogo liderstva i natsionalnoy bezopasnosti Rossii [Materials of a new generation – the basis of innovation, technological leadership and national security of Russia], Intellekt i tekhnologii, 2016, No 2 (14), pp. 16–21.
2. Kablov, E.N., Valueva, M.I., Zelenina, I.V., Khmelnitsky, V.V., Aleksashin, V.M., Ugleplastiki na osnove benzoksazinovykh oligomerov – perspektivnye materialy [Carbon plastics based on benzoxazine oligomers – promising materials], Trudy VIAM, 2020, No 1, pp. 68–77, URL: http://www.viam-works.ru (reference date 30/05/2020). DOI: 10.18577/2307-6046-2020-0-1-68-77.
3. Kablov, E.N., Kompozity: segodnya i zavtra [Composites: today and tomorrow], Metally Evrazii, 2015, No 1, pp. 36–39.
4. Buznik, V.M., Kablov, E.N., Koshurina, A.A., Materialy dlya slozhnykh tekhnicheskikh ustroistv arkticheskogo primeneniya. Nauchno-tekhnicheskie problemy osvoeniya Arktiki [Materials for complex technical devices for arctic applications. Scientific and technical problems of the Arctic development], Moscow: Nauka, 2015, pp. 275–285.
5. Kablov, E.N., Shchetanov, B.V., Ivakhnenko, Yu.A., Balinova, Yu.A., Perspektivnye armiruyushchie vysokotemperaturnye volokna dlya metallicheskikh i keramicheskikh kompozitsionnykh materialov [Promising high-temperature reinforcing fibers for metal and ceramic composite materials], Trudy VIAM, 2013, No 2, article 05, URL: http://www.viam-works.ru (reference date 10/03/2020).
6. Valueva, M.I., Zelenina, I.V., Akhmadieva, K.R., Zharinov, M.A., Mirovoy rynok vysokotemperaturnykh poliimidnykh ugleplastikov (obzor) [World market for high temperature polyimide carbon plastics (review)], Trudy VIAM, 2019, No 12, pp. 67–79, URL: http://www.viam-works.ru (reference date 30/05/2020). DOI: 10.18577/2307-6046-2019-0-12-67-79.
7. Valueva, M.I., Zelenina, I.V., Akhmadieva, K.R., Zharinov, M.A., Khaskov, M.A., Razrabotki FGUP VIAM v oblasti vysokotemperaturnykh ugleplastikov: napravleniya i perspektivy [Developments of FSUE “VIAM” in the field of high-temperature carbon plastics: directions and prospects], Materials of the IV All-Russian conference “The role of fundamental research in the implementation of Strategic directions for the development of materials and technologies and directions for their processing for the period until 2030”, Moscow: VIAM, 2018, pp. 71–76.
8. High temperature resins market by resin type (BMI, cyanate ester, polyimide, thermoplastics, and others), by end-use industry type (aerospace & defense, transportation, and others), by manufacturing process type (prepreg layup, RTM, and others), and by region (North America, Europe, Asia-Pacific, and Rest of the World), Trend, forecast, competitive analysis, and growth opportunity: 2018–2023, URL: https://www.marketresearch.com/Stratview-Research-v4143/High-Temperature-Composite-Resins-Resin11797958/ (reference date 30/05/2020).
9. Mikhailin, Yu.A., Teplo-, termo- i ognestoykost polimernykh materialov [Heat, thermal and fire resistance of polymeric materials], St Petersburg: Nauchnye Osnovy i Tekhnologii, 2011.
10. Innovative aircraft polymer matrix composites: Development of high production rate CFRP products for aircraft and quality assurance technology, Japan science and technology agency, URL: https://www.jst.go.jp/sip/k03/sm4i/dl/pamph_a_e.pdf (reference date 30/05/2020).
11. Avimid. Solvay. URL: https://www.solvay.com/en/brands/avimid (reference date 30/05/2020).
12. Toray aerospace advanced composite materials selector guide. Toray Advanced Composites. URL: https://www.toraytac.com/media/99290c4d-4856-49e5-8ca7d338c8f144f5/UvyInA/TAC/Documents/Selector%20Guides/Aerospace%20selector%20guides/Toray_Aerospace-Advanced-Composite-Materials_Selector-Guide.pdf (reference date 30/05/2020).
13. Cycom 2237. Solvay. URL: https://www.solvay.com/en/product/cycom-2237 (reference date 30/05/2020).
14. Polyimide prepregs. Renegade Materials Corporation. URL: http://www.renegadematerials.com/products/prepregs/polyimide-prepregs/ (reference date 30/05/2020).
15. Whitley, K.S., Collins, T.J., Mechanical properties of T650-35/AFR-PE-4 at elevated temperatures for lightweight aeroshell design, American Institute of Aeronautics and Astronautics. URL: https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20060013437.pdf (reference date 30/05/2020).
16. Zharinov, M.A., Shimkin, A.A., Akhmadieva, K.R., Zelenina, I.V., Osobennosti i svoystva rasplavnogo poliimidnogo svyazuyushchego polimerizatsionnogo tipa [Features and properties of melted polyimide binder of polymerization type], Trudy VIAM, 2018, No 12, pp. 46–53, URL: http://www.viam-works.ru (reference date 30/05/2020). DOI: 10.18577/2307-6046-2018-0-12-46-53.
17. Composites. ASM Handbook, 2001, V. 21, p. 1850.
18. Zharinov, M.A., Shimkin, A.A., Akhmadieva, K.R., Zelenina, I.V., Valueva, M.I., Rasplavnoe poliimidnoe svyazuyushchee marki VS-51 dlya termostoykikh PKM [Molten polyimide binder, grade VS-51 for heat-resistant PKM], Materials of the III All-Russian Scientific and Technical Conference “Polymer composite materials and new generation production technologies”, Moscow: VIAM, 2018, pp. 136–146.
19. Zharinov, M.A., Valueva M.I., Akhmadieva, K.R., Babchuk, I.V., Zelenina, I.V., Termoreaktivnye poliimidy: napravleniya issledovaniy i perspektivy ikh primeneniya [Thermosetting polyimides: research directions and prospects for their application], Materials of the All-Russian Scientific and Technical Conference “Polymer composite materials for the aerospace industry”, Moscow: VIAM, 2019, pp. 53–64.
20. Petrova, A.P., Mukhametov, R.R., Shishimirov, M.V., Pavlyuk, B.F., Starostina, I.V., Metody ispytaniy i issledovaniy termoreaktivnykh svyazuyushchikh dlya polimernykh kompozitsionnykh materialov (obzor) [Testing and research methods for thermosetting binders for polymer composite materials (review)], Trudy VIAM, 2018, No 12, pp. 62–70, URL: http://www.viam-works.ru (reference date 30/05/2020). DOI: 10.18577/2307-6046-2018-0-12-62-70.
21. Guseva, M.A., Ispolzovanie reologicheskogo metoda ispytaniy pri razrabotke polimernykh materialov razlichnogo naznacheniya [Using the rheological test method in the development of polymeric materials for various purposes], Trudy VIAM, 2018, No 11, pp. 35–44, URL: http://www.viam-works.ru (reference date 10/03/2020). DOI: 10.18577/2307-6046-2018-0-11-35-44.
22. Jin, F.-L., Park, S.-J., Preparation and characterization of carbon fiber-reinforced thermosetting composites: a review, Carbon letters, 2015, V. 16, No 2, pp. 67–77.
23. Raskutin, A.E., Khrulkov, A.V., Girsh, R.I., Tekhnologicheskie osobennosti mekhanobrabotki kompozitsionnykh materialov pri izgotovlenii detaley konstruktsiy (obzor) [Technological features of mechanical processing of composite materials in the manufacture of structural parts (review)], Trudy VIAM, 2016, No 9, pp. 106–118, URL: http://www.viam-works.ru (reference date 30/05/2020). DOI: 10.18577/23076046-2016-0-9-12-12.
24. Khaskov, M.A., Sravnitelnoe opredelenie temperatur steklovaniya polimernykh kompozitsionnykh materialov metodami DSK, TMA i DMA [Comparative determination of glass transition temperatures of polymer composite materials by DSC, TMA and DMA], Voprosy Materialovedeniya, 2014, No 3 (79), pp. 138–144.
Review
For citations:
Valueva M.I., Zelenina I.V., Zharinov M.A., Khaskov M.A. High-temperature carbon plastics based on thermoreactive polyimide binder. Voprosy Materialovedeniya. 2020;(3(103)):89-102. (In Russ.) https://doi.org/10.22349/1994-6716-2020-103-3-89-102
Views:
579
Email this article 