Generate QR code
Open Access
Subscription Access
Research of the properties of fiberglass based on polyetheretherketone
https://doi.org/10.22349/1994-6716-2021-105-1-76-83
Abstract
This article presents the results of studies of the properties of fiberglass based on polyetheretherke- tone (PEEK). A comparative analysis of the physical, thermophysical, elastic-strength and dielectric properties of fiberglass based on PEEK and fiberglass based on epoxy binder is carried out. The results of a study of the fire-insulating properties of fiberglass based on PEEK are presented.
About the Authors
E. D. Kolpachkov
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
Russian Federation
Kolpachkov E. D.
17 Radio St, 105005 Moscow
D. V. Pavlov
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
Russian Federation
Pavlov D. V.
17 Radio St, 105005 Moscow
M. I. Vavilova
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
Russian Federation
Vavilova M. I.
17 Radio St, 105005 Moscow
A. A. Zhirikov
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
Russian Federation
Zhirikov A. A.
17 Radio St, 105005 Moscow
References
1. Kablov, E. N., Strategicheskie napravleniya razvitiya materialov i tekhnologii ikh pererabotki na period do 2030 goda [Strategic development of materials and technologies of their recycling until 2030], Aviatsionnye materialy i tekhnologii, 2012, No S, pp. 7–17.
2. Kablov, E. N., Sovremennye materialy – osnova innovatsionnoi modernizatsii Rossii [Modern materials are the basis of innovate modernization of Russia], Metally Evrazii, 2012, No 3, pp. 10–15.
3. Kablov, E. N., Stanovlenie otechestvennogo kosmicheskogo materialovedeniya [Formation of domestic space materials science], Vestnik RFFI, 2017, No 3, pp. 97–105.
4. Starostina, I. V., Petrova, A. P., Shevchenko, Yu.N., Shishimirov, M.V., Kontrol termoplastichnykh svyazuyushchikh dlya kompozitsionnykh termoplastichnykh materialov (obzor) [Control of thermoplastic binders for composite thermoplastic materials (review)], Trudy VIAM, 2019, No 4 (76). URL: https://viam-works.ru (accessed January 05, 2021). DOI: 10.18577/2307-6046-2019-0-4-99-107.
5. Beyder, E. Ya., Petrova, G. N., Termoplastichnye svyazuyushchie dlya polimernykh kompozitsionnykh materialov [Thermoplastic binders for polymer composites], Trudy VIAM, 2015, No 11, issue 05, URL: http://viam-works.ru (accessed January 05, 2021). DOI: 10.18577/2307-6046-2015-0-11-5-5.
6. Petrova, G.N., Larionov, S. A., Platonov, M.M., Perfilova, D.N., Termoplastichnye materialy novogo pokoleniya dlya aviatsii [Next generation thermoplastic materials for aviation], Aviatsionnye materialy i tekhnologii, 2017, No S, pp. 420–436. DOI: 10.18577/2307-6046-2017-0-S-420-436.
7. Kondrashov, S. V., Shashkeev, K.A., Petrova, G.N., Mekalina, I.V., Polimernye kompozitsionnye materialy konstruktsionnogo naznacheniya s funktsionalnymi svoystvami [Polymer composite materials for structural purposes with functional properties], Aviatsionnye materialy i tekhnologii, 2017, No S, pp. 405–419. DOI: 10.18577/2071-9140-2017-0-S-405-419.
8. Sorokin, A.E., Petrova, G.N., Beyder, E.Ya., Perf ilova, D.N., Sloistye ugleplastiki na termoplastichnoy matritse novogo pokoleniya [Laminated carbon plastics on a thermoplastic matrix of a new generation], Vse materialy. Entsiklopedicheskiy spravochnik, 2017, No 9, pp. 10–17.
9. Petrova, G. N., Beyder, E. Ya., Starostina, I. V., Litievye termoplasty dlya izdeliy aviakosmicheskoy tekhniki [Injection molded thermoplastics for aerospace products], Vse materialy. Entsiklopedicheskiy spravochnik, 2016, No 7, pp. 21–28.
10. Mikhaylin, Yu.A., Konstruktsionnye polimernye kompozitsionnye materialy [Structural polymer composite materials], St Petersburg: Nauchnye osnovy i tekhnologii, 2008, pp. 100–570.
11. Mikhaylin, Yu. A., Termoplastichnye kompozitsionnye materialy [Thermoplastic composites], Polimernye materialy, 2007, No 7, p. 8.
12. Ustinov, V. A., Beyder, E. Ya., Primenenie kompozitsionnykh materialov s termoplastichnoy matritsey [The use of composite materials with a thermoplastic matrix], Konstruktsii iz kompozitsionnykh materialov, 1991, No 1, pp. 21–28.
13. Platonov, M.M., Petrova, G.N., Larionov, S.A., Barbotko, S.L., Polimernaya kompozitsiya na osnove polidodekalaktama dlya tekhnologii 3D-pechati rasplavlennoy polimernoy nityu [Polymer composition based on polydodecalactam for 3D printing technology with molten polymer filament], Trudy VIAM, 2015, No 11, issue 05, URL: http://viam-works.ru (accessed January 05, 2021). DOI: 10.18577/2071-9140-2016-0-10-9-9.
14. Petrova, N. A., Stekloplastiki i ikh syrevoe obespechenie v Rossii [Fiberglass plastics and their raw materials supply in Russia], Polimernye materialy, 2008, No 11, pp. 33–36.
15. Technical conditions. Glass construction fabrics 7781-14, 7781, 7581: TU BY 300059047.1112020, Belarus, 2020.
16. State Standard GOST 19170-2001. Fiberglass. Structural fabric. Moscow: IPK Izdatelstvo standartov, 2001.
Review
For citations:
Kolpachkov E.D., Pavlov D.V., Vavilova M.I., Zhirikov A.A. Research of the properties of fiberglass based on polyetheretherketone. Voprosy Materialovedeniya. 2021;(1(105)):76-83. (In Russ.) https://doi.org/10.22349/1994-6716-2021-105-1-76-83
Views:
367
Email this article 