Generate QR code
Open Access
Subscription Access
Improving the service life of coatings during running-in
https://doi.org/10.22349/1994-6716-2018-93-1-58-64
Abstract
In work researches of phosphate coatings are conducted. By means of methods of mathematical modeling of contact interaction it is established that on wear of phosphate coatings the greatest influence renders their roughness. For decrease in wear of the running-in coverings applied to protection of steel products, the way on increase in service life of phosphate coatings is offered.
About the Author
I. R. Aslanyan
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
Russian Federation
Dr Sc. (Eng)
17, Radio St, 105005 Moscow
References
1. Kablov, E.N., Innovatsionnye razrabotki FGUP “VIAM” GNTS RF po realizatsii “Strategicheskikh napravleniy razvitiya materialov i tekhnologiy ikh pererabotki na period do 2030 goda [Innovative developments of FSUE “VIAM” of the NSC RF for the implementation of Strategic Directions for the Development of Materials and Technologies for Their Processing for the Period up to 2030], Aviatsionnye materialy i tekhnologii, 2015, No. 1 (34), pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
2. Kablov, E.N., Muboyadzhyan, S.A., Heat-resistant coatings for the high-pressure turbine blades of promising GTES, Russian metallurgy (Metally), 2012, V. 2012, No 1, pp. 1–7.
3. Kablov, E.N., Korroziya ili zhizn [Corrosion or life], Nauka i zhizn, 2012, No 11, pp. 16–21.
4. Kablov, E.N., Muboyadzhyan, S.A., Zharostoykie i teplozashchitnye pokrytiya dlya lopatok turbiny vysokogo davleniya perspektivnykh GTD [Heat-resistant and heat-shielding coatings for highpressure turbine bladesof advanced GTE], Aviatsionnye materialy i tekhnologii, 2012, No S, pp. 60–70.
5. Alexandrov, D.A., Muboyadzhyan, S.A., Gayamov, A.M., Gorlov, D.S., Issledovanie zharostoykosti i kinetiki izmeneniya elementnogo sostava kompozitsii iz titanovogo splava VT41 s zharostoykimi pokrytiyami [Investigation of the heat resistance and kinetics of the change in the elemental composition of a composition of a titanium alloy VT41 with heat-resistant coatings], Aviatsionnye materialy i tekhnologii, 2014, No. S5, pp. 61–66. DOI: 10.18577/2071-9140-2014-0-s5-61-66.
6. Kablov, E.N., Ospennikova, O.G., Lomberg, B.S., Strategicheskie napravleniya razvitiya konstruktsionnykh materialov i tekhnologiy ikh pererabotki dlya aviatsionnykh dvigateley nastoyashchego i budushchego [Strategic directions of the development of structural materials and technologies for their processing for aircraft engines of the present and future], Avtomaticheskaya svarka, 2013, No 10, pp. 23–32.
7. Aslanyan, I.R., Shuster, L.Sh., Iznashivanie elektroliticheskikh NiP pokrytiy pri frettingkorrozii [Wear electrolytic NiP coatings during fretting corrosion], Aviatsionnye materialy i tekhnologii, 2015, No 2 (35), pp. 26–31. DOI: 10.18577/2071-9140-2015-0-2-26-31.
8. Shuster, L.Sh., Krioni, N.K., Aslanyan, I.R., Emaev, I.I., Otsenka iznashivaniya pokrytiy v razlichnykh usloviyakh treniya [Evaluation of wear of coatings under various friction conditions], Uprochnyayushchie tekhnologii i pokrytiya, 2015, No 2 (122), pp. 10–13.
9. Grudev, A.P., Zilberg, Yu.V., Tilik, V.T., Trenie i smazki pri obrabotke metallov davleniem[Friction and lubrication in the treatment of metals by pressure]: Handbook, Moscow: Metallurguiya, 1982.
10. Trenie, iznashivanie i smazka[Friction, wear and lubrication]: Handbook, Kragelsky, I.V., Alisin, V.V. (Eds.), Moscow: Mashinostroenie. 1979. Book 2.
11. Wenzel, S.V., Primenenie smazochnykh masel v dvigatelyakh vnutrennego sgoraniya[Application of lubricating oils in internal combustion engines], Moscow: Khimiya, 1979.
12. Barykin, N.P., Aslanian, I.R., Matematicheskoe modelirovanie rezhimov poverkhnostnogo plasticheskogo deformirovaniya dlya povysheniya iznosostoykosti podshipnikov skolzheniya [Mathematical modeling of surface plastic deformation modes for increasing wear resistance of sliding bearings], Trenie i iznos, 2001, V. 22, No 5, pp. 496–501.
13. Goryacheva, I.G., Development of Galin’s Research in Contact Mechanics, Contact Problems, Galin, L.A., Gladwell, G.M.L. (Eds.), Springer, 2008, pp. 207–237.
14. Johnson, K.L. Contact Mechanics, Cambridge University Press, 1985.
15. Goryacheva, I.G., Mekhanika friktsionnogo vzaimodeistviya [Mechanics of friction interaction], Moscow: Nauka, 2001.
Review
For citations:
Aslanyan I.R. Improving the service life of coatings during running-in. Voprosy Materialovedeniya. 2018;(1(93)):58-64. (In Russ.) https://doi.org/10.22349/1994-6716-2018-93-1-58-64
Views:
247
Email this article 