Generate QR code
Open Access
Subscription Access
Thermophysical and physical-mechanical properties of the modernized industrial PVC-plastic compound
https://doi.org/10.22349/1994-6716-2021-105-1-84-93
Abstract
Compounds based on PVC-plasticate of I40-13A grade, zinc borate, antimony and chalk oxide have been obtained. The thermal stability, thermophysical and operational properties of the obtained compounds have been investigated. It was found that the modernized compounds have high thermal stability values that meet the requirements for insulating materials. It is shown that the obtained compounds have low values of heat release, heat of combustion, smoke formation and release of hydrogen chloride. It was found that the operational characteristics of the modernized PVC cable compounds are improved.
About the Authors
T. A. Borukaev
Kabardino-Balkarian State University named after Kh.M. Berbekov
Russian Federation
Russian Federation
Borukaev T. A., Dr Sc (Chem)
174 Chernyshevsky St, 360004 Nalchik
R. M. Martazanova
Ingush State University
Russian Federation
Russian Federation
Martazanova R. M., Cand Sc. (Eng)
7 Zyazikov Ave, 386001 Magas
References
1. Ableev, R. I., Aktualnye problemy v razrabotke i proizvodstve negoryuchikh polimernykh kompaundov dlya kabelnoy industrii [Actual problems in the development and production of non-flammable polymer compounds for the cable industry], Kabel-news, 2009, No 6–7, pp. 64–69.
2. Mitkevich, A. S., Paverman, N. G., Elagina, A. N., Kabelnye kompozitsii na osnove polietilena i polivinilkhlorida [Cable compositions based on polyethylene and polyvinyl chloride], Kabeli i provoda, 2007, V. 302, No 1, pp. 3–7.
3. Kryshtob, B.I., Vlasov, D. V., Mironov, V.F., Apresyan, L.A., Vlasova, T.V., Rasmagin, S.I., Kuratashvili, Z.A., Salovsky, A.A ., Issledovanie temperaturnoy zavisimosti elektroizolyatsionnykh svoystv plenok iz PVKH, podvergnutogo modeliruyushchemu teplovoe starenie termolizu v rastvore [Study of the temperature dependence of the electrical insulating properties of PVC films subjected to thermolysis simulating thermal aging in solution], Elektrotekhnika, 2015, No 8, pp. 39–42.
4. PVC Handbook, Wilkes, Ch.E., Daniels, Ch.A., Summers, J.W. (Eds.), Munich: Hanser, 2005
5. Grossman, R.F., Guzeev, V. V., Rukovodstvo po razrabotke kompozitsiy na osnove PVKh [Guidelines for the development of PVC-based compositions], St Petersburg: Nauchnye osnovy i tekhnologii, 2009, pp. 34–105.
6. Nikolaev, V. G., Sravnitelnaya otsenka sovremennykh polivinilkhloridnykh plastikatov i bezgalogennykh kompozitsiy na osnove poliolefinov [Comparative evaluation of modern polyvinyl chloride plasticates and halogen-free compositions based on polyolefins], Kabeli i provoda, 2010, V. 324, No 5, pp. 19–26.
7. Mazitova, A. K., Maskova, A. R., Nafikova, R. F., Aminova, G. K., Ispolzovanie dobavok pri poluchenii kabelnykh plastikatov [The use of additives in the production of cable compounds], Bashkirskiy khimicheskiy zhurnal, 2017, No 3, pp. 50–53.
8. Vasiliev, E. B., Kamensky, M. K., Pronin, A. S., O kachestve polivinilkhloridnykh plastikatov povyshennoy pozharobezopasnosti, primenyaemykh v otechestvennoy kabelnoy promyshlennosti [About the quality of polyvinyl chloride plastic compounds of increased fire safety used in the domestic cable industry], Kabeli i provoda, 2020, V. 383, No 3, pp. 27–33.
9. Ushkov, V.A., Lalayan, V.M., Nevzorov, D.I., Lomakin, S.M., O vliyanii ftalatnykh i fosfatnykh plastifikatorov na vosplamenyaemost i dymoobrazuyushchuyu sposobnost polimernykh kompozitsionnykh materialov [About the effect of phthalate and phosphate plasticizers on the flammability and smoke-generating ability of polymer composite materials], Pozharovzryvoopasnost, 2013, V. 22, No 10, pp. 25–33.
10. Mazina, L. A., Nafikova, R. F., Akhmetkhanov, R. M., Polivinilkhloridnye plastikaty ponizhennoy pozharoopasnosti, modifitsirovannye bromi fosforsoderzhashchimi plastifikatorami [Polyvinyl chloride compounds of reduced fire hazard, modified with bromineand phosphorus-containing plasticizers], Vestnik Bashkirskogo universiteta, 2020, V. 25, No 4, pp. 776–780.
11. Martynov, A. V., Mazina, L. A., Klyuchnikov, O. R., Modifikatsiya kabelnykh polivinilkhloridnykh plastikatov ponizhennoy goryuchesti [Modification of low flammability PVC cable], Vestnik tekhnologicheskogo universiteta, 2016, V. 19, No 15, pp. 73–75.
12. Baggaley, R. G., Hornsby, P. R., Yahya, R., Cusack, P. A., Monk, A. W., The influence of novel zinc hydroxystannate-coated fillers on the fireproperties of flexible PVC, FAM (Fire & Mater), 1997, V. 21, Issue 4, pp. 179–181.
13. Guzeev, V. V., Struktura i svoistva napolnennogo polivinilkhlorida [Structure and properties of filled polyvinyl chloride], St Petersburg: Nauchnye osnovy i tekhnologii, 2012.
14. Borukaev, T.A., Uzhakhova, L.Ya., Sultigova, Z.Kh., Modification of the Recipe of Industrial PVC plastic for Increasing Its Fire Resistance, Key Engineering Materials, 2020, V. 869, pp. 224–229.
15. Dedov, A.V., Nazarov, V. G., Isparenie plastifikatora iz napolnennogo polivinilkhlorida [Evaporation of plasticizer from filled polyvinyl chloride], Materialovedenie, 2013, No 9, pp. 10–12.
16. Sharipov, B. F., Ablr akhmanov, L. A., Artamonov, A. V., Garkavi, M. S., Nefedev, A. P., Nemykh, G. A., Vliyanie gidroksidov metallov na svoystva PVKh kompozitsii [Influence of metal hydroxides on the properties of PVC composition], Izvestiya KGASU (Kazan State University of Architecture and Civil Engineering), 2016, V. 38, No 4, pp. 402–408.
17. Guzeev, V. V., Ratsionalny vybor dobavok dlya kompozitsiy PVKh [Rational choice of additives for PVC compositions], Polimernye materialy, 2010, No 7–8, pp. 38–48.
Review
For citations:
Borukaev T.A., Martazanova R.M. Thermophysical and physical-mechanical properties of the modernized industrial PVC-plastic compound. Voprosy Materialovedeniya. 2021;(1(105)):84-93. (In Russ.) https://doi.org/10.22349/1994-6716-2021-105-1-84-93
Views:
239
Email this article 