|Generate QR code
Open Access
Subscription Access
Protective coatings of alloy of the Ni–Cr–Mo system with a wide range of operating temperatures
https://doi.org/10.22349/1994-6716-2021-106-2-74-79
Abstract
This article presents the results of experimental studies of alloys of the Ni–Cr–Mo–Be–Re–Zr–Hf– Nb system for creating functional wear-resistant coatings on their basis by the method of microplasma spraying. The coating works efficiently in a wide range of positive (up to 1100°C) and negative (up to minus 196°C) temperatures.
Keywords
wear resistance,
protective coating,
construction materials,
composite materials,
operating temperatures
Supporting agencies: Experimental studies were performed on the equipment of the Center for Collective Use “Composition, Structure and Properties of Structural and Functional Materials” of the NRC “Kurchatov Institute” – CRISM “Prometey”
About the Authors
T. I. Bobkova
NRC Kurchatov Institute – CRISM Prometey
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
R. Yu. Bystrov
NRC Kurchatov Institute – CRISM Prometey
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
A. F. Vasilev
NRC Kurchatov Institute – CRISM Prometey
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
A. M. Makarov
NRC Kurchatov Institute – CRISM Prometey
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
B. V. Farmakovsky
NRC Kurchatov Institute – CRISM Prometey
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
References
1. Kablov, E.N., Bondarenko, Yu.A., Kolodyazhny, M.Yu., Surova, V.A., Narsky, A.R., Perspektivy sozdaniya vysokotemperaturnykh zharoprochnykh splavov na osnove tugoplavkikh matrits i estestvennykh kompozitov [Prospects for the creation of high-temperature heatresistant alloys based on refractory matrices and natural composites], Voprosy Materialovedeniya, 2020, No 4 (104), pp. 64–78.
2. Gerashchenkov, D.A., Bobkova, T.I., Vasilev, A.F., Kuznetsov, P.A., Samodelkin, E.A., Farmakovsky, B.V., Funktsionalnye zashchitnye pokrytiya iz splava na osnove nikelya [Functional nickel base alloy protective coatings], Voprosy Materialovedeniya, 2018, No 1 (93), pp. 110–114.
3. Farmakovsky, B.V., Izgotovlenie tonkikh metallicheskikh nitey iz khrupkikh vysokoprochnykh materialov [Making thin metal threads from brittle high-strength materials], Izvestiya Akademii Nauk SSSR. Metally, 1977, No 2, pp. 239–245.
4. Potapov, A.A., Atomno-molekulyarnaya sborka na osnove khimicheskoy svyazi: priroda i mekhanizm formirovaniya [Atomic-molecular assembly based on a chemical bond: the nature and mechanism of formation], Nanotekhnika, 2010, No 2, pp. 14–27.
5. DIMET. Application of technology and equipment. URL: http://www.dimet-r.narod.ru (reference date 30/05/2021)
6. Alferov, Zh.I., et al., Perspektivnye napravleniya razvitiya nauki v Peterburge [Promising areas of science development in St Petersburg], St Petersburg: Permyakov publ., 2015.
7. Golovin, Yu.I., Vvedenie v nanotekhniku [Introduction to nanotechnology], Moscow: Mashinostroenie, 2007.
Review
For citations:
Bobkova T.I., Bystrov R.Yu., Vasilev A.F., Makarov A.M., Farmakovsky B.V. Protective coatings of alloy of the Ni–Cr–Mo system with a wide range of operating temperatures. Voprosy Materialovedeniya. 2021;(2(106)):74-79. (In Russ.) https://doi.org/10.22349/1994-6716-2021-106-2-74-79
Views:
213
Email this article 