|Generate QR code
Open Access
Subscription Access
Socket welding of polypropylene pipes with a heated tool at negative ambient temperatures
https://doi.org/10.22349/1994-6716-2021-106-2-161-169
Abstract
The paper presents the results of study, which considered relationship between supramolecular structure and strength of polypropylene pipes joints obtained by socket welding with heated tool at various ambient temperatures, including negative ones.
About the Authors
G. V. Botvin
Institute of Oil and Gas Problems, Siberian Branch of the Russian Academy of Sciences
Russian Federation
Russian Federation
Cand Sc. (Eng)
20 Avtodorozhnaya St,677007 Yakutsk
N. P. Starostin
Institute of Oil and Gas Problems, Siberian Branch of the Russian Academy of Sciences
Russian Federation
Russian Federation
Dr Sc. (Eng)
20 Avtodorozhnaya St,677007 Yakutsk
References
1. Willoughby, D.A., Woodson, R.D., Sutherland R., Plastic piping: Handbook, New York, 2002.
2. SP 40-101-96. Proektirovanie i montazh truboprovodov iz polipropilena Random Copolymer [Design and laying of “Random Copolymer” polipropilene pipelines]; introduced 09.04.96, Moscow: GUP TsPP, 1997.
3. VSN 47-96: Vedomstvennye stroitelnye normy po proektirovaniyu i montazhu vnutrennikh sistem vodosnabzheniya iz polipropilenovykh trub “Random Copolymer” [Departmental building codes for the design and installation of internal water supply systems of polypropylene pipes “Random Copolymer”], introduced August 8, 1996, Moscow: Mosorgstroy, 1996.
4. SP 131.13330.2012: Stroitelnaya klimatologiya [Building climatology], approved June 30, 2012, Moscow: Minregion Rossii, pp. 4–19.
5. Starostin, N.P., Ammosova, O.A., Modelirovanie teplovogo protsessa svarki polietilenovykh trub vstyk pri nizkikh temperaturakh [Simulation of the thermal process of butt welding of polyethylene pipes at low temperatures], Inzhenerno-fizichesky zhurnal, 2016, V. 89, No 3, pp. 706–713.
6. Starostin, N.P., Ammosova, O.A., Upravlenie teplovym protsessom elektromuftovoy svarki polietilenovykh trub pri nizkikh temperaturakh [Thermal control of electrofusion welding of polyethylene pipes at low temperatures], Svarka i diagnostika, 2017, No 5, pp. 21–25.
7. Starostin, N.P., Gerasimov, A.I., Botvin, G.V., Danzanova, E.V., Svarka polipropilenovykh trub pri otritsatelnykh temperaturakh [Welding of polypropylene pipes at negative temperatures], Stroitelstvo unikalnykh zdaniy i sooruzheniy, 2017, No 4 (55), pp. 7–18.
8. Starostin, N.P., Ammosova, O.A., Botvin, G.V., Teplovoy protsess svarki polipropilenovykh trub v rastrub pri nizkikh temperaturakh [Thermal process of welding polypropylene pipes into a socket at low temperatures], Svarka i diagnostika, 2015, No 6, pp. 57–61.
9. Starostin, N.P., Vasilieva, M.A., Optimalnaya glubina paza smennoy nasadki dlya podogreva polipropilenovykh trub v usloviyakh nizkikh temperatur [Optimal groove depth of the replaceable nozzle for heating polypropylene pipes at low temperatures], Novaya nauka: sostoyanie i puti razvitiya, 2016, No 10–2, pp. 165–167.
10. Kaygorodov, G.K., Kargin, V.Yu., Vliyanie skorosti okhlazhdeniya polietilenovogo svarnogo shva na ego prochnost [Effect of cooling rate of a polyethylene weld on its strength], Truboprovody i ekologiya, 2001, No 2, pp. 13–14.
11. Ivaniukov, D.V., Fridman, M.L., Polipropilen [Polypropylene], Moscow: Khimiya, 1974.
12. Perepelkin, V.P., Polipropilen, ego svoystva i metody pererabotki [Polypropylene, its properties and processing methods], Leningrad: LDNTP, 1963.
13. Bartenev, G.M., Zelenev Yu.V., Fizika i mekhanika polimerov [Physics and mechanics of polymers]: a textbook for technical colleges, Moscow: Vysshaya shkola, 1983.
14. Kargin, V.A., Slonimsky, G.L., Kratkie ocherki po fiziko-khimii polimerov [Brief essays on the physicochemistry of polymers], Moscow: Khimiya, 1967, pp. 34–48.
15. Rambidi, N.G., Struktura polimerov – ot molekul do nanoansambley [Polymer structure: from molecules to nano-ensembles]: a study guide, Dolgoprudny: Intellekt, 2009.
16. Guerasimov, A.I., Starostin, N.P., Botvin, G.V., Danzanova, E.V., Method and sample for determination of strength of weld coupling of polymer pipes, Unified depository of the results of intellectual activity, URL: https://edrid.ru/en/rid/217.015.e773.html
17. State Standard GOST R 55142-2012: Testing of welded joints of thermoplastic sheets and pipes, introduced November 22, 2012, Moscow: Standartinform, 2016.
Review
For citations:
Botvin G.V., Starostin N.P. Socket welding of polypropylene pipes with a heated tool at negative ambient temperatures. Voprosy Materialovedeniya. 2021;(2(106)):161-169. (In Russ.) https://doi.org/10.22349/1994-6716-2021-106-2-161-169
Views:
270
Email this article 