Generate QR code
Open Access
Subscription Access
Developing technology of fabrication of functional nanostructured coatings on wear- and corrosion-resistant alloy based on the Cu–Ni system
https://doi.org/10.22349/1994-6716-2018-93-1-70-75
Abstract
The paper presents complex studies of nanostructured powder of Cu-Hf-BN alloy system and functional wear and corrosion-resistant coatings based on It are presented. A technology for applying a composite nanostructured coating of the Cu-Ni-Zr-Cr-Hf-BN system onto a steel substrate (steel Kh18Yu5S) was developed using supersonic cold and microplasma deposition techniques. The coatings have elevated level of microhardness (up to 32 GPa), adhesive strength (more than13 MPa), resistance to stress-corrosion crackingand a wide range of operating temperatures from 850 to –196°C.
About the Authors
A. M. Makarov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
A. V. Kosulnikova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
T. I. Bobkova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc. (Eng)
49, Shpalernaya St, 191015 St Petersburg
A. F. Vasiliev
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
D. A. Geraschenkov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc. (Eng)
49, Shpalernaya St, 191015 St Petersburg
V. N. Klimov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
E. A. Samodelkin
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
B. V. Farmakovsky
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc. (Eng)
49, Shpalernaya St, 191015 St Petersburg
References
1. Gerashchenkov, D.A., Razrabotka tekhnologicheskogo protsessa naneseniya pokrytiy metodom kholodnogo gazodinamicheskogo napyleniya na osnove armirovannykh poroshkov sistemy Al–Sn + Al2O3 [Development of the technological process of coating deposition by the method of cold gas-dynamic spraying based on reinforced powders of the Al–Sn + Al2O3 system], Abstract of thesis for the degree of candidate of sciences, St Petersburg, 2015.
2. Margolin, V. I., Zhabrev, V.A., Lukianov, G.N., Tupik, V.A, Vvedenie v nanotekhnologiyu[Introduction to nanotechnology]: Textbook, St Petersburg: Lan, 2012.
3. Perspektivnye napravleniya razvitiya nauki v Peterburge [Promising directions of the development of science in St Petersburg], Alferov Zh. et al. (Eds), St Petersburg: Permyakov, 2015, pp. 137–163.
4. Glezer A.M., Permyakova I.E., Nanokristally, zakalennye iz rasplava[Nanocrystals hardened from the melt], Moscow: Fizmatlit, 2012.
5. Kogan, B.I., Sukhovolsky, A.A., Tekhnologicheskoe obespechenie kachestva remonta kovshey ekskavatorov [Technological support of quality of repair of buckets of excavators], Vestnik KuzGTU, 2010.
6. Garshin, A. P., Shumyacher, V. M., Pushkarev, O. I., Sposob polucheniya i svoystva abrazivnogo materiala na osnove karbida kremniya i korunda [Method of obtaining and properties of abrasive material based on silicon carbide and corundum], Collection of materials for the 8th International Symposium “Powder Metallurgy: Surface Engineering, New Powder Composite Materials, Welding”, Minsk, 2013, pp. 124–129.
7. Geraschenkov, D.A., Farmakovsky, B.V., Samodelkin, E.A., Geraschenkova, E.Yu., Issledovanie adgezionnoy prochnosti kompozitsionnykh armirovannykh pokrytiy sistemy metal–nemetall, poluchennykh metodom kholodnogo gazodinamicheskogo napyleniya [Investigation of the adhesive strength of composite reinforced coatings of the metal-nonmetal system obtained by the method of cold gasdynamic spraying], Voprosy Materialovedeniya, 2014, No. 2(78), pp. 103–117.
8. Burkanova, E.Yu., Farmakovsky, B.V., Vysokoskorostnoy mekhanosintez s i ispolzovaniem dezintegratornykh ustanovok dlya polucheniya nanostrukturirovannykh poroshkovykh materialov sistemy metall – keramika iznosostoykogo klassa [High-speed mechanosynthesis using disintegrator plants for obtaining nanostructured powder materials of the metal-ceramic system of wear-resistant class], Voprosy Materialovedeniya, 2012, V. 1 (69), pp. 80–85.
Review
For citations:
Makarov A.M., Kosulnikova A.V., Bobkova T.I., Vasiliev A.F., Geraschenkov D.A., Klimov V.N., Samodelkin E.A., Farmakovsky B.V. Developing technology of fabrication of functional nanostructured coatings on wear- and corrosion-resistant alloy based on the Cu–Ni system. Voprosy Materialovedeniya. 2018;(1(93)):70-75. (In Russ.) https://doi.org/10.22349/1994-6716-2018-93-1-70-75
Views:
299
Email this article 