Generate QR code
Open Access
Subscription Access
Studying changes of limit deformations and mechanical properties of steels of different structure under single and multiple explosive loading
https://doi.org/10.22349/1994-6716-2021-107-3-209-228
Abstract
The ultimate deformation capacity of stainless high-alloyed austenitic nitrogen-containing steel and low-alloyed chromium-nickel-molybdenum steel up to the moment of failure under single and multiple blast loading in the air has been investigated. The paper presents data on the change in the mechanical properties and structure of these steels as a result of explosive loading to the limit and to the specified level of deformation.
About the Authors
O. V. Glibenko
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
T. V. Vikhareva
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
A. V. Ilyin
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
References
1. Epshteyn, G.N., Stroenie metallov, deformirovannykh vzryvom [The structure of metals deformed by blast], 2nd ed., Moscow: Metallurgiya, 1988.
2. Vashchenko, A.P., Leonov, V.P., Tokarev, V.M., Eglit, A.S., Vliyanie vysokoskorostnogo deformirovaniya i temperatury na kharakteristiki prochnosti i plastichnosti khromonikelmolibdenovoy stali [Influence of high-rate deformation and temperature on the strength and ductility characteristics of chromium-nickel-molybdenum steel], Problemy prochnosti, 1991, No 9 (267), pp. 17–19.
3. Vashchenko, A.P., et al., Vliyanie skorosti nagruzheniya na mekhanicheskie svoystva staley raznogo urovnya prochnosti [Influence of loading rate on mechanical properties of steels with different strength levels], Problemy prochnosti, 1989, No 10 [244], pp. 43–48.
4. Koneva, N.A., Fizika prochnosti metallov i splavov [Physics of strength of metals and alloys], Sorosovsky obrazovatelny zhurnal. Fizika, 1997, No 7, pp. 95–102.
5. Troshchenko, V.T., et al., Prochnost materialov i konstruktsiy [Strength of materials and structures], Kiev: Akademperiodika, 2005.
6. Meyers, M.A., Mur, L.E., Udarnye volny i yavleniya vysokoskorostnoy deformatsii metallov [Shock waves and phenomena of high rate deformation of metals], Moscow: Metallurgiya, 1984.
7. Davydenkov, N.N., Izbrannye trudy. T. 1: Dinamicheskaya prochnost i khrupkost metallov [Selected works. V. 1: Dynamic strength and fragility of metals], Kiev: Naukova Dumka, 1981.
8. Polukhin, P.I., Gorelik, S.S., Vorontsov, V.K., Fizicheskie osnovy plasticheskoy deformatsii [Physical foundations of plastic deformation], Moscow: Metallurgia, 1982.
9. Batkov, Yu.V., Glushak, B.L., Novikov, S.A., Soprotivlenie materialov plasticheskoy deformatsii pri vysokoskorostnom deformirovanii v udarnykh volnakh [Resistance of materials to plastic deformation during high-rate deformation in shock waves]: a review, Moscow: TSNIIatominform, 1990.
10. Epshteyn, G.N., Kaybyshev, O.A., Vysokoskorostnaya deformatsiya i struktura metallov [High strain rate and metal structure], Moscow: Metallurgia, 1971.
11. Krupin, A.V., Soloviev, V.Ya., Sheftel, N.I., Kobelev, A.G., Deformatsiya metallov vzryvom [Deformation of metals by explosion], Moscow: Metallurgia, 1975.
12. Deribas, A.A., Fizika uprochneniya i svarki vzryvom [Physics of hardening and welding by explosion], Novosibirsk: Nauka, 1980.
13. Krupin, A.V., Soloviev, V.Ya., Popov, G.S., Krstev, M.R., Obrabotka metallov vzryvom [Explosion treatment of metals], Moscow: Metallurgia, 1991.
14. Gavriliev, I.N., Deribas, A.A., Zeldovich, V.I., et al., Struktura i mekhanicheskie svoystva austenitnoy khromomargantsevoy stali posle nagruzheniya udarnymi volnami [Structure and mechanical properties of austenitic chromium-manganese steel after loading by shock-waves], FMM, 1988, V. 65, No 4, pp. 801–808.
15. Tereshchenko, N.A., Zeldovich, V.I., Uvarov, A.I., Frolova, N.Yu., Vliyanie davleniya pri udarno-volnovom nagruzhenii na razvitie preryvistogo raspada v austenitnoy azotsoderzhashchey stali pri posleduyushchem nagreve [Effect of pressure under shock-wave loading on the development of discontinuous decomposition in austenitic nitrogen-containing steel during subsequent heating], FMM, 2006, No 6, pp. 618–625.
16. Vikhareva, T.V., Glibenko, O.V., Fomina, O.V., Ilyin, A.V., Issledovanie izmeneniya struktury i mekhanicheskikh svoystv vysokoprochnoy azotsoderzhashchey austenitnoy stali posle dinamicheskogo nagruzheniya [Investigation of changes in the structure and mechanical properties of highstrength nitrogen-containing austenitic steel after dynamic loading], Problemy chernoy metallurgii i materialovedeniya, 2017, No 4, pp. 56–65.
17. Makklintok, F., Argon, A., Deformatsiya i razrushenie materialov [Deformation and destruction of materials], Moscow: Mir, 1970.
18. Makhutov, N.A., Deformatsionnye kriterii razrusheniya i raschet elementov konstruktsiy na prochnost [Deformation criteria for fracture and strength analysis of structural elements], Moscow: Mashinostroenie, 1981.
Review
For citations:
Glibenko O.V., Vikhareva T.V., Ilyin A.V. Studying changes of limit deformations and mechanical properties of steels of different structure under single and multiple explosive loading. Voprosy Materialovedeniya. 2021;(3(107)):209-228. (In Russ.) https://doi.org/10.22349/1994-6716-2021-107-3-209-228
Views:
238
Email this article 