Generate QR code
Open Access
Subscription Access
Obtaining a high-nickel-alloyed layer on the surface of low-carbon steel using monometallic powders and laser processing
https://doi.org/10.22349/1994-6716-2021-108-4-138-148
Abstract
The paper studies deposition of a highly nickel-alloyed corrosion-resistant layer on the surface of a low-carbon economically alloyed steel. The formation of the layer is carried out in two stages – at the first stage, a precursor coating is applied by cold spraying, and at the second, an alloyed layer is formed on the surface by laser. A layer with a nickel content of up to 70% is formed on the surface of the steel. The results of X-ray diffraction phase analysis indicate that a face-centered cubic lattice of a solid solution and Ni3Fe intermetallic compound has been formed in the studied layer.
About the Authors
D. A. Gerashchenkov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
R. Yu. Bystrov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
P. A. Kuznetsov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
E. Yu. Gerashchenkova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
A. M. Makarov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Yu. M. Markov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
A. V. Anisimov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. Gorynin , I. V., Ignatov , V. A., Rybin , V. V., Fabritsiev , S. A., Kazakov , V. A., Chakin , V. P., Prokofye v , Y. G. Effects of neutron irradiation on properties of refractory metals // Journal of Nuclear Materials. – 1992. – V. 191–194. – P. 421–425. https://doi.org/10.1016/S0022-3115(09)80079-2. (reference date 06/12/2021).
2. Golosienko, S . A . , Minyakin , N . A . , Ryabov , V . V . , Semicheva, T . G . , Khlusova, E.I., The Effect of Microalloying on Mechanical Properties of Low-Carbon Chromium–Nickel–Molybdenum Steel, Inorganic Materials: Applied Research, 2019, V. 10, pp. 1309–1313. URL: https://doi.org/10.1134/S2075113319060194 (reference date 06/12/2021).
3. Ryabov, V .V . , Khlusova, E . I . , Zisman, A . A . , Rogozhkin, S. V. , Nikitin , A . A . , Lukyanchuk , A . A . , Quantitative Analysis of Carbide Phases in Medium-Carbon Steel After LowTemperature Tempering. Metallurgist, 2019, V. 62, pp. 926–936. URL: https://doi.org/10.1007/s11015-019- 00739-5 (reference date 06/12/2021).
4. Müller , G . , Schumacher, G . , Zimmermann , F . , Investigation on oxygen controlled liquid lead corrosion of surface treated steels, Journal of Nuclear Materials, 2000, V. 278(1), pp. 85–95. URL: https://doi.org/10.1016/S0022-3115(99)00211-1 (reference date 06/12/2021).
5. Markov, M.A., Kashtanov, A.D., Krasikov, A.V., Bykova, A.D., Gerashchenkov, D.A., Makarov, A.M., Perevislov, S.N., Corrosion-resistant ceramic coatings that are promising for use in liquid metal environments, Key Engineering Materials, 2019, V. 822, pp. 752–759. URL: https://doi.org/10.4028/www.scientific.net/KEM.822.752 (reference date 06/12/2021).
6. Cheng, G . P ., He , Y . Z ., Preparing of NiAl and Ni3Al Intermetallic Composite Coatings by Laser Cladding In Situ Synthesis, Advanced Materials Research, 2011, V. 239–242, pp. 636–641. URL: https://doi.org/10.4028/www.scientific.net/amr.239-242.636 (reference date 06/12/2021).
7. Qi , C . , Zhan, X . , Gao, Q . , Liu , L . , Son g, Y . , Li , Y . , The influence of the pre-placed powder layers on the morphology, microscopic characteristics and microhardness of Ti-6Al-4V/WC MMC coatings during laser cladding, Optics and Laser Technology, 2019, V. 119, Article 105572. URL: https://doi.org/10.1016/j.optlastec.2019.105572 (reference date 06/12/2021).
8. Tang, C . , Cheng , F. , Man , H ., Effect of laser surface melting on the corrosion and cavitation erosion behaviors of a manganese–nickel–aluminium bronze. Materials Science and Engineering: A, 2004, V. 373, Iss. 1–2, pp. 195–203. URL: https://doi.org/10.1016/j.msea.2004.01.016 (reference date 06/12/2021).
9. Emamian, A . , Corbin, S . F ., Khajepour , A ., Effect of laser cladding process parameters on clad quality and in-situ formed microstructure of Fe–TiC composite coatings, Surface and Coatings Technology, 2010, V. 205, Iss. 7, pp. 2007–2015. URL: https://doi.org/10.1016/j.surfcoat.2010.08.087 (reference date 06/12/2021).
10. Papyrin, A ., Kosarev, V . , Klinkov , S . , Alkimov, A . , Fomin , V ., Cold Spray Technology, Elsevier, 2007. URL: https://doi.org/10.1016/B978-0-08-045155-8.X5000-5 (reference date 06/12/2021).
11. Oryshchenko, A .S . , Gerashchenkov , D . A . Aluminum matrix functional coatings with high microhardness on the basis of Al–Sn + Al2O3 composite powders fabricated by cold gas dynamic spraying, Inorganic Materials: Applied Research, 2016, December, pp. 863–867. URL: https://doi.org/10.1134/S2075113316060125 (reference date 06/12/2021).
12. Gerashchenkov, D . A . , Farmakovsky, B .V . , Bobkova, T . I . , Klimov , V . N ., Features of the Formation of Wear-Resistant Coatings from Powders Prepared by a Micrometallurgical Process of High-Speed Melt Quenching, Metallurgist, 2017, V. 60, Iss. 9–10, pp. 1103–1112. URL: https://doi.org/10.1007/s11015-017-0413-0 (reference date 06/12/2021).
13. Geraschenkov, D . A . , Vasiliev, A . F. , Farmakovsk y, B . V . , Mashek , A . C h ., Issledovanie temperatury potoka v protsesse kholodnogo gazodinamicheskogo napyleniya funktsionalnykh pokrytiy [Study of the flow temperature in the process of cold gas-dynamic spraying of functional coatings], Voprosy Materialovedeniya, 2014, No 1, pp. 87–96. URL: https://www.elibrary.ru/item.asp?id=21515704 (reference date 06/12/2021).
14. Bystrov R .Y u , Gerashchenkov D . A ., Poluchenie pokrytiya mnogokomponentnoy sistemy Al-Cr-Ni-Co-Fe na stalnoy podlozhke s ispolzovaniem lazera [Coating of a multicomponent system Al-Cr-NiCo-Fe on a steel substrate obtained by laser], Voprosy Materialovedeniya, 2021, No 3 (107), pp. 109–117. URL: https://www.elibrary.ru/item.asp?id=47173771 (reference date 06/12/2021).
Review
For citations:
Gerashchenkov D.A., Bystrov R.Yu., Kuznetsov P.A., Gerashchenkova E.Yu., Makarov A.M., Markov Yu.M., Anisimov A.V. Obtaining a high-nickel-alloyed layer on the surface of low-carbon steel using monometallic powders and laser processing. Voprosy Materialovedeniya. 2021;(4(108)):138-148. (In Russ.) https://doi.org/10.22349/1994-6716-2021-108-4-138-148
Views:
197
Email this article 