

Heat treatment of welded joints of experimental highly-doped titanium alloy
https://doi.org/10.22349/1994-6716-2022-109-1-26-39
Abstract
In this article, the effect of heat treatment on the phase composition and structural state of welded joints of an experimental highly-doped titanium alloy, made by argon-arc and electron-beam welding, was investigated. As a result of the heat treatment of welded joints at a temperature of 690 ° C, the structure of the near-seam zone is stabilized. However, in order to fully restore the plasticity of the welded joint with the formation of alpha-phase globules of a simple structure in the structure of the near-seam zone, a higher heat treatment temperature is required.
About the Authors
V. I. MikhaylovRussian Federation
Dr Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
I. R. Kozlova
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
S. V. Kuznetsov
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Yu. M. Markova
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
E. A. Vasilieva
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. Moiseev, V.N., Kulikov, F.R., Kirillov, Yu.G., Sholokhova, L.V., Vaskin, Yu.V., Svarnye soedineniya titanovykh splavov (struktura i svoystva) [Welded joints of titanium alloys (structure and properties)], Moscow: Metallurgiya, 1978.
2. Lyasotskaya, V.S., Termicheskaya obrabotka svarnykh soedineniy titanovykh splavov [Heat treatment of welded joints of titanium alloys], Moscow: Ekomet, 2003.
3. Horev A.I., Fundamentals of heat treatment and welding of high-strength (alpha + beta) titanium alloys. Mechanical engineering technology, 2013, N 8, p.5-11.
4. Glazunov, S.G., Moiseev, V.N., Konstruktsionnye titanovye splavy [Structural titanium alloys], Moscow: Metallurgiya, 1974.
5. Kozlova, I.R., Chudakov, E.V., Tretyakova, N.V., Markova, Yu.M., Vasilieva, E.A., Vliyanie termicheskoy obrabotki na formirovanie struktury i uroven mekhanicheskikh svoystv vysokolegirovannogo splava titana [Influence of heat treatment on the formation of the structure and the level of mechanical properties of a high-alloy titanium alloy], Voprosy Materialovedeniya, 2019, No 4 (100), pp. 28-41.
6. Mikhaylov, V.I., Kozlova, I.R., Kuznetsov, S.V., Markova, Yu.M., Va-sileva, E.A., Strukturno-fazovye prevrashcheniya pri svarke vysokolegirovannogo splava titana [Structural phase transformations during welding of high-alloy titanium alloy], Voprosy Materialovedeniya, 2021, No 3 (107), pp. 63–81.
7. Kolachev, B.A., Ilin, A.A., Ryndenkov, D.V., Sistema Ti-Al-Mo kak osnova diagrammy fazovogo sostava otozhzhennykh titanovykh splavov [Ti-Al-Mo system as the basis for the phase composition diagram of annealed titanium alloys], Izvestiya vuzov. Tsvetnaya metallurgiya, 2005, No 6, pp. 56–61.
8. Grabin, V.F., Struktura i svoystva svarnykh soedineniy iz titanovykh splavov [Structure and properties of welded joints from titanium alloys], Kiev: Naukova dumka, 1964/
9. Horev, A.I., Fundamentals of alloying and theory of heat treatment of welded joints of titanium beta alloys. Welding production, 2012, N3, p.31-39.
10. Polkin, I.S., Uprochnyayushchaya termicheskaya obrabotka titanovykh splavov [Hardening heat treatment of titanium alloys], Moscow: Metallurgiya, 1984.
11. Gorynin, I.V., Ushkov, S.S., Khatuntsev, A.N., Loshakova, N.I., Titanovye splavy dlya morskoy tekhniki [Titanium alloys for marine engineering], St Petersburg: Politekhnika, 2007.
Review
For citations:
Mikhaylov V.I., Kozlova I.R., Kuznetsov S.V., Markova Yu.M., Vasilieva E.A. Heat treatment of welded joints of experimental highly-doped titanium alloy. Voprosy Materialovedeniya. 2022;(1(109)):26-39. (In Russ.) https://doi.org/10.22349/1994-6716-2022-109-1-26-39