Generate QR code
Open Access
Subscription Access
Research of the process of activated soldering for glass/metal
https://doi.org/10.22349/1994-6716-2021-109-1-77-82
Abstract
The article presents the results of research on the development of technology for joining glass-tometal using activated soldering with amorphous solders.
Keywords
amorphous solders,
activated soldering,
liquid and solid phase energy relaxation,
metal-glass pair,
interfacial tension
Supporting agencies: Experimental studies were performed on the equipment of the Center for Collective Use “Composition, Structure and Properties of Structural and Functional Materials” of the NRC “Kurchatov Institute” – CRISM “Prometey” with financial support from the Ministry of Science and Higher Education of the RF, Agreement 13.ЦКП.21.0014 (075-11-2021-068), unique identifier RF–2296.61321X0014.
About the Authors
A. F. Vasiliev
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
E. L. Gyulikhandanov
Peter the Great St Petersburg Polytechnic University
Russian Federation
Russian Federation
Dr Sc. (Eng)
29 Polytechnicheskaya St, 195251 St Petersburg
V. N. Klimov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
A. M. Makarov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
E. A. Samodelkin
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
B. V. Farmakovsky
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
References
1. Lashko, S.V., Tekhnologiya payki izdeliy v mashinostroenii [Soldering technology for products in mechanical engineering]: designer handbook, Moscow: Mashinostroenie, 1993.
2. Glezer, A.M., Permyakova, I.E., Nanokristally, zakalennye iz rasplava [Melt-hardened nanocrystals], Moscow: FIZMATLIT, 2012.
3. Margolin, V.I., Zhabrev, V.A., Lukyanov, G.N., Tupik, V.A., Vvedenie v nanotekhnologiyu [Introduction to nanotechnology]: Textbook, St Petersburg: Lan, 2012.
4. Farmakovsky, B.V., et al., Issledovanie adgezionnoy prochnosti kompozitsionnykh armirovannykh pokrytiy sistemy “metal – nemetall”, poluchennykh metodom KhGDN [Investigation of the adhesion strength of composite reinforced coatings of the “metal–non-metal” system, obtained by cold spraying method], Voprosy Materialovedeniya, 2014, No 2 (78), pp. 103–117.
5. Maksimova, S.V., Amorfnye pripoi dlya payki nerzhaveyushchey stali i titana i struktura payanykh soedineny, [Amorphous solders for soldering stainless steel and titanium and the structure of soldered joints], Adgeziya rasplavov i payka materialov, 2007, Issue 40, pp. 70–81.
6. Kalinin, B.A., Grigoriev, A.E., Amorfnye lentochnye pripoi dlya vysokotemperaturnoy payki. Opyt razrabotki tekhnologii proizvodstva i primeneniya [Amorphous tape solders for high-temperature soldering. Experience in the development of production technology and application], Svarochnoe proizvodstvo, 1996, No 1, pp. 15–19.
7. Patent RU 2573309: Bobkova, T.I., Chernysh, A.A., Eliseev, A.A., Deev, A.A., Klimov, V.N., Samodelkin, E.A., A method of obtaining a composite reinforced powder material, Publ. 20.01.2016.
8. Gerashchenkov, D.A., Razrabotka tekhnologicheskogo protsessa naneseniya pokrytiy metodom kholodnogo gazodinamicheskogo napyleniya na osnove armirovannykh poroshkov sistemy AlSn + Al2O3 [Development of a technological process for applying coatings by the method of cold gas-dynamic spraying based on reinforced powders of the AlSn + Al2O3 system]: Abstract of dissertation for the degree of candidate of technical sciences, St. Petersburg, 2015.
9. Alferov, Zh.I., et al., Perspektivnye napravleniya razvitiya nauki v Peterburge [Promising areas of science development in St Petersburg], St Petersburg: Permyakov, 2015.
Review
For citations:
Vasiliev A.F., Gyulikhandanov E.L., Klimov V.N., Makarov A.M., Samodelkin E.A., Farmakovsky B.V. Research of the process of activated soldering for glass/metal. Voprosy Materialovedeniya. 2022;(1(109)):77-82. (In Russ.) https://doi.org/10.22349/1994-6716-2021-109-1-77-82
Views:
190
Email this article 