Generate QR code
Open Access
Subscription Access
Physical and mechanical properties of composites low density polyethylene/polybutylene terephthalate/compatibilizer
https://doi.org/10.22349/1994-6716-2021-105-1-81-89
Abstract
Polymer composites based on low-density polyethylene and polybutylene terephthalate have been obtained. It has been established that the use of a compatibilizer makes it possible to improve the compatibility of initial thermodynamically incompatible polymers. It is shown that polymer composites containing a compatibilizer are superior in their physical and mechanical characteristics to the original polymers and mixtures based on them.
About the Authors
T. A. Borukaev
Kabardino-Balkarian State University named after Kh.M. Berbekov
Russian Federation
Russian Federation
Dr Sc (Chem)
174 Chernyshevsky St, 360004 Nalchik
L. I. Kitieva
Ingush State University
Russian Federation
Russian Federation
Cand Sc. (Chem)
7 Zyazikov Ave, 386001 Magas
References
1. Kalinichev, E.L., Sakovtseva, M.B., Pavlova, I.V., Kavokin, E.I., Sakovich, D.A., Effektivny podkhod k sozdaniyu sovremennykh kompozitsionnykh materialov [An effective approach to the creation of modern composite materials], Polymernye materialy, 2008, No 3, pp. 4–14.
2. Kolosov, A.S., Sokolskaya, M.K., Vitkalova, I.A., Torlova, A.S., Pikalov, E.S., Sovremennye polimernye kompozitsionnye materialy i ikh primenenie [Modern polymer composite materials and their applications], Mezhdunarodnyy zhurnal prikladnykh i fundamentalnykh issledovany, 2018, No 5 (part 1), pp. 245–256.
3. Chukov, N.A., Ligidov, M.Kh., Pakhomov, S.I., Mikitaev, A.K., Smesi polimerov na osnove polipropilena [Polymer mixtures based on polypropylene], Rossiyskiy khimichesky zhurnal, 2015, V.59, No 4, pp. 114–125.
4. Markovic, G., Visakh, P.M., Pasquini, D., Recent Developments in Polymer Macro and Nano Blends, Amsterdam: Elsevier, 2017.
5. Kakhramanly, Yu.N., Nesovmestimye polimernye smesi i kompozitsionnye materialy na ikh osnove [Incompatible polymer blends and composite materials based on them], Baku: ELM, 2013.
6. Gaeva, M.Kh., Borukaev, T.A., Mashukov, N.I., Mikitaev, A.K., Polimernye smesi na osnove polibutilentereftalata i poliolefinov ustoychivye k deystviyu vysokikh temperatur [Polymer mixtures based on polybutylene terephthalate and polyolefins resistant to high temperatures] Plasticheskie massy, 2003, No 10, pp. 28–31.
7. Katsapova, O.V., Lapko vsky, V.V., Izuchenie fiziko-khimicheskikh svoistv voloknistykh materialov iz smesey polialkilentereftalatov i izotakticheskikh poliolefinov [Study of the physicochemical properties of fibrous materials from mixtures of polyalkylene terephthalates and isotactic polyolefins], Uspekhi v khimii i khimicheskoy tekhnologii, 2008, V. 22. No 5, pp. 13–16.
8. Mikitaev, M.A., Kozlov, G.V., Mikitaev, A.K., Strukturny analiz sovmestimosti polimernykh smesey [Structural Compatibility Analysis of Polymer Blends], Plasticheskie massy, 2017, No 1–2, pp. 20–23.
9. Mikitaev, М.А., Kozlov, G.V., Mikitaev, A.K., Zaikov, G.E., Plastichnost smesey polietilentereftalat/polibutilentereftalat [Plasticity of polyethylene terephthalate/polybutylene terephthalate mixtures], Bulletin of Kazan Technological University, 2015, V. 18, No 7, pp. 132–134.
10. Tkhakakhov, R.B., Karamyrzov, B.S., Tkhakakhov, E.R., Pshikhachev, A.G., Protsessy relaksatsii i razrusheniya v kompozitakh s nanostrukturnoy morfologiyey [Processes of relaxation and destruction in composites with nanostructured morphology], Plasticheskie massy, 2012, No 3, pp. 28–33.
11. Khairulin, R.Z., Sukhanov, P.P., Arkhireev, V.P., Vliyanie molekulyarnoy massy polipropilena na svoystva sistemy polipropilen-polikaprolaktam [Influence of the molecular weight of polypropylene on the properties of the polypropylene-polycaprolactam system], Bulletin of Kazan Technological University, 2007, V. 10. №5. pp. 69–76.
12. Mikitaev, М.А., Mamkhegov, R.M., Kozlov, G.V., Mikitaev, A.K., Zaikov, G.E., Zavisimost vyazkosti rasplava smesey polietilentereftalat, polibutilentereftalat ot ikh sovmestimosti [Dependence of the melt viscosity of polyethyleneterephthalate/polybutyleneterephthalate mixtures on their compatibility], Bulletin of Kazan Technological University, 2015, V. 18, No 16, pp. 154–156.
13. Akaeva, M.M., Mashukov, N.I., Issledovanie stoykosti k agressivnym sredam kompozitsionnykh materialov na osnove PBT+PEVP [Investigation of the resistance to aggressive media of composite materials based on PBT+HDPE], Plasticheskie massy, 2008, No 11, pp. 5–8.
14. Fomina, N.N., Khozin, V.G., Kompatibilizatsiya smesey polimerov pri pererabotke otkhodov izdeliy iz termoplastov, [Compatibilization of polymer mixtures in the processing of waste products from thermoplastics], Nanotekhnologii v stroitelstve, 2021, V.13, No 4, pp. 229–236.
15. Ekimov, A.I., Aizinson , I.L., Kulachinskya , O.B., Nekotorye aspekty antogonizma komponentov v termoplastichnykh polimernykh materialakh [Some aspects of antagonism of components in thermoplastic polymer materials], Polimernye materialy, 2007, No 9, pp. 6–-11.
16. Smesi polimerov [Polymer blends], Kuleznev, V.N., (Ed.), Moscow: Khimiya. Chemistry, 1980.
17. Alekseeva, T.T., Lipatov, Yu.S., Yarovaya, N.V., Mezhfaznaya oblast v kompatibilizirovannykh vzaimopronikayushchikh setkakh na osnove poliuretana-polistirola [Interfacial region in compatibilized interpenetrating meshes based on polyurethane-polystyrene], Vysokomolekulyarnye soedineniya: Series A, 2005, V. 47, No 8. pp. 1535–1544.
18. Maiti S.N., Misra A. Polybutyleneterephthalate/High Density Polyethylene Alloys. Mechanical Properties and Rheology, J. of Applied Polym. Sci.1992, V. 45, pp. 1837–1847.
19. Bruggen , E.-P.A., Koster, R.P., Picken , S.J., Ragaert, K., Influence of Processing Parameters and Composition on the Effective Compatibilization of Polypropylene–polyethyleneterephthalate, Blends International Polymer Processing, 2016, V. 31, No 2, pp. 179–187.
20. Dikanova , N.S., Ma t s eevich , A.V., Ko vriga , O.V., Askadsky, A.A., Kravchenko, T.P., Aristov , V.M., Issledovanie relaksatsionnykh mekhanicheskikh svoistv nanokompozitov na osnove PEND [Study of relaxation mechanical properties of HDPE-based nanocomposites], Plasticheskie massy, 2017, No 3–4, pp. 14–18.
Review
For citations:
Borukaev T.A., Kitieva L.I. Physical and mechanical properties of composites low density polyethylene/polybutylene terephthalate/compatibilizer. Voprosy Materialovedeniya. 2022;(2(110)):81-89. (In Russ.) https://doi.org/10.22349/1994-6716-2021-105-1-81-89
Views:
228
Email this article 