Generate QR code
Open Access
Subscription Access
Influence of boron microalloying on the structure and properties of joints welding rolled high-strength steel with a standard yield point of 750 MPa by flux-cored wire
https://doi.org/10.22349/1994-6716-2018-93-1-169-174
Abstract
The effect of boron on the structure and mechanical properties of a welded high-strength steel with a standard yield strength of 750 MPa has been studied. The flux-cored wire of grade 48PP-69 has been developed on the basis of results.
Supporting agencies: Ministry of Education and Science under the agreement No. 14.595.21.0004, the unique identifier RFMEFI59517X0004.
About the Authors
P. V. Melnikov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc. (Eng)
49, Shpalernaya St, 191015 St Petersburg
V. V. Gezha
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc. (Eng)
49, Shpalernaya St, 191015 St Petersburg
G. D. Motovilina
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc. (Eng)
49, Shpalernaya St, 191015 St Petersburg
V. A. Moguilnikov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
Russian Federation
49, Shpalernaya St, 191015 St Petersburg
References
1. Grabin, V.F., Metallovedenie svarki plavleniem [Metallurgy of welding by melting], Kiev: Naukova dumka, 1982.
2. Pokhodnya, I.K., Orlov, L.N., Shevchenko, G.A., Shlepakov, V.N., Vliyanie legirovaniya na mekhanicheskie svoystva svarnykh shvov, vypolnennykh poroshkovymi provolokami [Effect of alloying on the mechanical properties of welded joints made with powdered wires], Avtomaticheskaya svarka, 1985, No 7 (388), pp.10–11.
3. Evans, G.M., Microstructure and properties of ferritic steel welds containing Al and Ti, Welding Journal, 1995, August, pp. 249–261.
4. Hayakawa, N., Sakaguchi, S., Kawabata, F., Okatsu, M., Ota, M., Nishiyama , S ., Nagatani, K ., Isisaki, K ., Patent RU 2434070 С22С38/00, В23K35/30, В23K9/23: A highstrength welded steel pipe, the weld metal of which has high resistance to cold cracking, and the process of its fabrication, Publ. 20.11.2011, Bull. 32, p. 26.
5. Faynberg, L .I ., Rybakov, A .A ., Alimov, A.N ., Rozert, R., Mikrolegirovanie shvov titanom i borom pri mnogodugovoy svarke gazonefteprovodnykh trub bolshogo diametra [Microalloying of joints with titanium and boron for multi-arc welding of large-diameter gas-oil pipes,], Avtomaticheskaya svarka, 2007, No 5, pp. 20–25.
6. Podgaetsky, V .V ., O vliyanii khimicheskogo sostava shva na ego mikrostrukturu i mekhanicheskie svoystva [On the effect of the chemical composition of the weld on its microstructure and mechanical properties],Avtomaticheskaya svarka, 1991, No 2, pp. 1–9.
7. Oerlikon Schweisstechnik Gmbh, Consumables, (reference date 15/03/2018), URL: https://www.oerlikon-welding.com
8. Drahtwarenfabrik-Drahtzug Stein Gmbh & Co KG,Materialien & Verfahren, (reference date 15/03/2018), URL:http://www.drahtzug.com/de/unternehmen/materialien-und-verfahren/
9. Stainless Steel Welding: ESAB Technical Handbook, (reference date 15/03/2018), http://www.esab.com/gb/en/support/upload/Technical-Handbook-Stainless-Steel-Welding.pdf
10. Makarenko, V.D., Belyaev, V.A., Prokhorov, N.N., Shatilo, S.P., Chernov, V.Yu., Vliyanie modifitsiruyushchikh dobavok na mekhanicheskie i vyazkoplasticheskie svoystva svarnykh soedineniy neftegazoprovodov [Effect ofmodifying additives on the mechanical and viscoplastic properties of welded joints of oil and gas pipelines], Svarochnoe proizvodstvo, 2001, No 5, pp. 9–13.
11. Houdremont, E., Handbuch der Sonderstahlkunde, Springer-Verlag, 1956.
12. Burkhard, J., Lau, T., North, T.H., Esperance, G.L., Effect of aluminium on the TiO-B-N balance in submerged arc welding, Welding Journal, 1988, pp. 25–30.
Review
For citations:
Melnikov P.V., Gezha V.V., Motovilina G.D., Moguilnikov V.A. Influence of boron microalloying on the structure and properties of joints welding rolled high-strength steel with a standard yield point of 750 MPa by flux-cored wire. Voprosy Materialovedeniya. 2018;(1(93)):169-174. (In Russ.) https://doi.org/10.22349/1994-6716-2018-93-1-169-174
Views:
346
Email this article 