Generate QR code
Open Access
Subscription Access
Tool life and transverse-longitudinal extrusion in the hollow axisymmetric parts manufacturing
https://doi.org/10.22349/1994-6716-2022-112-4-156-163
Abstract
The paper studies fundamental possibilities of using the transverse-longitudinal extrusion scheme
for improving the technologies for manufacturing hollow axisymmetric parts from metal bars.
About the Authors
M. S. Kalugina
JSC Concern “Okeanpribor”; Baltic State Technical University Voenmekh named after Dmitry Ustinov
Russian Federation
Russian Federation
197376 St. Petersburg, Chkalovsky Ave, 46
119005 St Petersburg, 1st Krasnoarmeyskaya, 1
S. A. Zhukov
Baltic State Technical University Voenmekh named after Dmitry Ustinov
Russian Federation
Russian Federation
119005 St Petersburg, 1st Krasnoarmeyskaya, 1
E. E. Agamirova
Dagestan State Technical University
Russian Federation
Russian Federation
367026 Republic of Dagestan, Makhachkala, Imam Shamil Ave, 70
A. V. Bogdanov
Baltic State Technical University Voenmekh named after Dmitry Ustinov
Russian Federation
Russian Federation
119005 St Petersburg, 1st Krasnoarmeyskaya, 1
References
1. Eskova, E.A., Remshev, E.Yu ., Gusev, A.S., Afimyin, G.O., Razrabotka tekhnologicheskogo processa izgotovleniya stalnoi gilzy klb. 57 mm [Development of the technological process of manufacturing a.57-mm caliber], Proceedings of the 13th conference “Molodezh. Tekhnika. Kosmos”, Ser. Biblioteka zhurnala ‘Voenmekh. Vestnik BGTU’, 2021, No 76, pp. 276–279.
2. Remshev, E.Yu., Lobov, V.A., Rasulov, Z.N., Frolova E.O., Use of graphene-based lubricants to reduce friction inside the units of construction equipment, AIP Conference Proceedings, Ser. “First International Conference ‘Applied Science and Engineering’”, 2021, p. 070005.
3. Malikov, V.N., Ishkov, A.V., Voynash, S.A., Sokolova, V.A., Remshev, E.Yu , Issledovanie protsessov uprochneniya stalnykh detalej metodom indukcionnoj naplavki [Investigation of the processes of hardening of steel parts by induction surfacing], Metallurg, 2021, No 11, pp. 69–75.
4. Ivanov, K.M., Olekhver, A.I., Vinnik, P.M., Remshev, E.Yu ., Voprosy mekhaniki sploshnykh sred primenitelno k obshchepromyshlennym tekhnologicheskim problemam [Issues of continuum mechanics in relation to general industrial technological problems], Inzhenerny zhurnal: nauka i innovatsii, 2021, No 4 (112), pp. 62–69.
5. Zaterukha, E.V., Lobov, V.A., Remshev, E.Yu ., Issledovanie tekhnologicheskikh vozmozhnostey protsessa podshtampovki gilz [Investigation of technological capabilities of the sleeve stamping process], Proceedings of the 13th conference “Innovatsionnye tekhnologii i tekhnicheskie sredstva spetsialnogo naznacheniya”, Ser. Biblioteka zhurnala “Voenmekh. Vestnik BGTU”, 2020.
Review
For citations:
Kalugina M.S., Zhukov S.A., Agamirova E.E., Bogdanov A.V. Tool life and transverse-longitudinal extrusion in the hollow axisymmetric parts manufacturing. Voprosy Materialovedeniya. 2022;(4(112)):156-163. (In Russ.) https://doi.org/10.22349/1994-6716-2022-112-4-156-163
Views:
203
Email this article 