Generate QR code
Open Access
Subscription Access
Influence of heat-treatment modes on the structure and properties of bainitic-martensitic steel
https://doi.org/10.22349/1994-6716-2022-112-4-164-173
Abstract
Modeling of the stages of production technology of high-strength bainitic-martensitic steel is carried out: of hot plastic deformation, hardening and high-temperature tempering. The dependence of the structure and properties of steel on the modes of hot plastic deformation and heat treatment has been established.
Keywords
Gleeble-3800 modeling,
low-carbon chromium-nickel-molybdenum steel,
rolling,
quenching and tempering,
structure,
mechanical properties
Supporting agencies: Experiments were performed on the equipment of the Collective Facilities Center “Composition, Structure and Properties of Structural and Functional Materials” of the Central Research Institute of Structural Materials “Prometey” of the National Research Center “Kurchatov Institute”.
About the Authors
E. V. Mishurinskaya
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
191015 St Petersburg, Shpalernaya St, 49
V. A. Belyaev
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
191015 St Petersburg, Shpalernaya St, 49
M. X. Golubeva
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc.
191015 St Petersburg, Shpalernaya St, 49
G. D. Motovilina
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc.
191015 St Petersburg, Shpalernaya St, 49
References
1. Rybin, V.V., Malyshevsky, V.A., Khlusova, E.I., Vysokoprochnye svarivaemye stali [High-strength welded steels], St Petersburg: Publishing house of Polytechnic University, 2016, p.212.
2. Kovalchuk, M.V., Oryshchenko, A.S., Malyshevsky, V.A., Petrov, S.N., Shumilov, E.A., K voprosu ob unifikacii khimicheskogo sostava vysokoprochnyh staley dlya sudostroeniya [Unifying chemical compositions of high-strength steels in shipbuilding], Voprosy Materialovedenia, 2018, No 1 (93), pp. 7–14.
3. Golosienko, S.A., Motovilina, G.D., Khlusova, E.I., Vliyanie struktury, sformirovannoy pri zakalke, na svoystva vysokoprochnoy hladostoykoy stali posle otpuska [Influence of the structure formed during hardening on the properties of high-strength cold-resistant steel after tempering], Voprosy Materialovedenia, 2008, No 1 (53), pp. 32–44.
4. Golubeva, M.V., Khladostoykaya svarivaemaya stal klassa prochnosti 690 MPa dlya tyazhelonagruzhennoy tekhniki [Cold-resistant welded steel of strength class 690 MPa for heavy-duty equipment], abstract, Ph.D. thesis, St Petersburg, 2019, pp.12–14.
5. Golubeva, M.V., Sych, O.V., Khlusova, E.I., et al., Izmenenie struktury vysokoprochnoy ekonomnolegirovannoy stali marki 09KhGN2MD pri otpuske [Structure changes of high-strength economically alloyed steel 09KhGn2MD (09CrMnNi2MoCu) when tempering], Voprosy Materialovedenia, 2018, No 1 (93), pp. 15–26.
Review
For citations:
Mishurinskaya E.V., Belyaev V.A., Golubeva M.X., Motovilina G.D. Influence of heat-treatment modes on the structure and properties of bainitic-martensitic steel. Voprosy Materialovedeniya. 2022;(4(112)):164-173. (In Russ.) https://doi.org/10.22349/1994-6716-2022-112-4-164-173
Views:
216
Email this article 