Generate QR code
Open Access
Subscription Access
Calculation and investigation of the phase composition of a composite intermetallic layer synthesized on the surface of VT6 titanium alloy from Cu–SiC and Al–SiC powders
https://doi.org/10.22349/1994-6716-2023-113-1-62-71
Abstract
The physical and chemical foundations of the technology of cold gas-dynamic spraying of coatings on titanium for two types of charge are considered, in one of which chemically inactive copper is used as a ductile metal in combination with abrasive silicon carbide powder, in the other – chemically active aluminum in combined with silicon carbide. A thermodynamic modeling technique has been developed to select the composition of the coating charge and predict the change in its phase composition at high temperature.
Keywords
titanium alloy,
composite intermetallic coating,
cold gas-dynamic spraying,
copper-silicon carbide,
aluminum-silicon carbide,
laser processing
Supporting agencies: The study was carried out with the financial support of the Russian Foundation for Basic Research and the State Corporation Rosatom within the framework of the scientific project No. 20-21-00024. Experimental studies were carried out on the equipment of the Center for the Collective Use of Scientific Equipment “Composition, Structure and Properties of Structural and Functional Materials” of the National Research Center “Kurchatov Institute” – CRISM “Prometey” with financial support from the Ministry of Science and Higher Education – Agreement No 13. TsKP .21.0014 (075-11-2021-068). Unique identification number RF-2296.61321X0014.
About the Authors
D. A. Gerashchenkov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
Yu. P. Udalov
SPbGTI (TU)
Russian Federation
Russian Federation
Dr Sc.(Chem)
26 Ave Moskovsky, 190013 St Petersburg
References
1. Kozlov, I.A., Leshchev, K.A., Nikiforov, A.A., Demin, S.A., Kholodnoe gazodinamicheskoe napylenie [Cold gas-dynamic spraying]: review, Trudy VIAM, 2020, No. 8(90), pp. 77–93.
2. Inozemtsev, A.A., Bashkatov, I.G., Koryakovtsev, A.S., Titanovye splavy v izdeliyakh razrabotki OAO ‘Aviadvigatel’, [Titanium alloys in products developed by JSC Aviadvigatel], Sovremennye titanovye splavy i problemy ikh razvitiya, Moscow: VIAM, 2010, pp. 43–46.
3. Grinberg B.A., Ivanov M.A., Intermetallidy Ni3Al i TiAl: mikrostruktura, deformatsionnoe povedenie [Ni3Al and TiAl intermetallides: microstructure, deformation behavior], Ekaterinburg: Ural Branch of the Russian Academy of Sciences, 2002.
4. Nochovnaya, N.A., Bazyleva, O.A., Kablov, D.E., Panin, P.V., Intermetallidnye splavy na osnove titana i nikelya [Intermetallic alloys based on titanium and nickel], Kablov, E.N., (Ed.), Moscow: VIAM, 2018.
5. Proceedings of the 10th World Conf. on Titanium (Titanium’2003), Science and Technology, Hamburg, 2003, No 1–5, p. 3425.
6. Tang, C., Cheng, F., Man, H., Effect of laser surface melting on the corrosion and cavitation erosion behaviors of a manganese – nickel – aluminum bronze, Materials Science and Engineering: A, 2004, No. 373(1–2), pp. 195–203, doi:10.1016/j.msea.2004.01.016.
7. Colinet, C., Pasturel, A., Buschow, K.H.J., Enthalpies of formation of Ti–Cu intermetallic and amorphous phases, Journal of Alloys and Compounds, 1997, No 247, pp. 15–19.
8. Radishevskii, V.L., Lepakova, O.K., Afanasiev, N.I., Sintez, struktura i svoystva MAKH-faz Ti3SiC2 i Nb2AlC [Synthesis, structure, and properties of the Ti3SiC2 and Nb2AlC MAX phases], Proc. 12th int. conf. “Prospects for the development of fundamental sciences”, Tomsk, 2015, pp. 502–504.
9. Istomin, P.V., Nadutkin, A.B., Ryabkov, Yu.L., Goldin, B.A., Poluchenie Ti3SiC2 [Obtaining Ti3SiC2], Neorganicheskiye materialy, 2006, V. 42, No 3, pp. 292–297.
Review
For citations:
Gerashchenkov D.A., Udalov Yu.P. Calculation and investigation of the phase composition of a composite intermetallic layer synthesized on the surface of VT6 titanium alloy from Cu–SiC and Al–SiC powders. Voprosy Materialovedeniya. 2023;(1(113)):62-71. (In Russ.) https://doi.org/10.22349/1994-6716-2023-113-1-62-71
Views:
158
Email this article 