Generate QR code
Open Access
Subscription Access
Study of the attenuation of ultrasonic oscilliations in 3D-orthogonal woven composite
https://doi.org/10.22349/1994-6716-2023-113-1-83-93
Abstract
The particularities of 3D-woven composite’s defects are observed. Automated ultrasonic immersion through-transmission technique for their non-destructive testing is offered. X-ray computed tomography (X-ray CT) application for the definition of the reasons of ultrasonic waves high attenuation in 3D-orthogonal woven composite sample is described. The analysis of defects detected with X-ray CT is shown. The suggestion about connection between quantity of projection of defects total area at the plane which is perpendicular to ultrasonic wave propagation and ultrasonic wave attenuation has been made.
About the Authors
S. I. Yakovleva
National Research Center “Kurchatov Institute” – VIAM
Russian Federation
Russian Federation
17 Radio St, 105005 Moscow
M. A. Dalin
National Research Center “Kurchatov Institute” – VIAM
Russian Federation
Russian Federation
17 Radio St, 105005 Moscow
O. A. Krupnina
National Research Center “Kurchatov Institute” – VIAM
Russian Federation
Russian Federation
17 Radio St, 105005 Moscow
V. A. Krupennikov
PAO “ODK Saturn”
Russian Federation
Russian Federation
163 Lenin Ave, 152903 Rybinsk, Yaroslavl region
References
1. Kablov, E.N., Innovatsionnye razrabotki FGUP VIAM GNTs RF po realizatsii “Strategicheskikh napravleny razvitiya materialov i tekhnology ikh pererabotki na period do 2030 goda” [Innovative developments of FSUE VIAM of the State Research Center of the Russian Federation on the implementation of “Strategic directions for the development of materials and technologies for their processing for the period up to 2030”], Aviatsionnye materialy i tekhnologii, 2015, No.1, pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
2. Kablov, E.N., Klyuchevaya problema – materialy [The key problem is materials], Tendentsii i orientiry innovatsionnogo razvitiya Rossii, Moscow: VIAM, 2015, pp. 458–464.
3. Kablov, E.N., Materialy novogo pokoleniya [New generation materials], Zaschita i bezopasnost, 2014, No 4, pp. 28–29.
4. Murashov, V.V., Kontrol i diagnostika mnogosloinykh konstruktsy iz polimernykh kompozitsionnykh materialov akusticheskimi metodami [Control and diagnostics of multilayer structures made of polymer composite materials by acoustic methods], Moscow: Spektr, 2016.
5. Belinis, P.G., Donet sk y, K.I., Lukyanenko, Y.V., Rogozhnikov, V.N., M ayer, Y., Bystrikova , D.V., Obiemno-armiruyuschie tselnotkanye preformy dlya izgotovleniya polimernykh kompozitsionnykh materialov [Volumetric-reinforcing solid-woven preforms for the manufacture of polymer composite materials], Aviatsionnye materialy i tekhnologii, 2019, No 4(57), pp. 18–26. DOI: 10.18577/2071-9140-2019-0-4-18-26.
6. Donet sk y, K.I., Karavaev, R.Y., Raskutin, A.E., Dun, V.A., Ugleplastik na osnove obiemnoarmiruyushchei triaksialnoi pletenoi preformy [Carbon fiber based on a volume-reinforcing triaxial braided preform], Trudy VIAM, 2019, No 1(73), pp. 55–63. URL: https://www.viam-works.ru. DOI: 10.18577/2307-6046-2019-0-1-55-63.
7. Saeedifara , M., Saleha , M.N., El-Dessoukyb , H.M., De Freitasa S. T., Zarouchas D., Ultrasonic Impact Damage Assessment in 3D Woven Composite Materials, Damage assessment of NCF, 2D and 3D woven composites under compression after multiple-impact using acoustic emission, Composites Part A, 2020. URL: https://doi.org/10.1016/j.compositesa.2020.105833.
8. Saboktakin , A., 3D textile preforms and composites for aircraft structures: a review, International Journal of Aviation, Aeronautics, and Aerospace, No 6(1). URL: https://doi.org/10.15394/ijaaa.2019.1299.
9. Tayong, R.B., Mienczakowski, M.J., Smith, R.A., 3D ultrasound characterization of woven composites, AIP Conference Proceedings, 1949, 130008 (2018). https://doi.org/10.1063/1.5031603.
10. Demidov, A.A., Krupnina , O.A., M ik h a ilova , N.A., Kosarina , E.I., Issledovanie obraztsov iz polimernykh kompozitsionnykh materialov metodom rentgenovskoi kompyuternoi tomografii i obrabotka tomogramm s izobrazheniem obiemnoi doli poristosti [Examination of samples from polymer composite materials by X-ray computed tomography and processing of tomograms with the image of the volume fraction of porosity], Trudy VIAM, 2021, No 5(99), pp. 105–113. http://www.viam-works.ru. DOI: 10.18577/2307-2021-2017-0-5-105-113.
11. Kosarina , E.I., Krupnina , O.A., Demidov, A.A., M i k h a ilova , N.A., Tsifrovoe opticheskoe izobrazhenie i ego zavisimost ot radiatscionnogo izobrazheniya pri nerazrushayuschem kontrole metodom tsifrovoij rentgenografii [Digital optical image and its dependence on radiation image during non-destructive testing by digital radiography], Aviatsionnye materialy i tekhnologii, 2019, No 1, pp. 37–42. DOI: 10.18577/2071-9140-2019-0-1-37-42.
12. Boi chuk , A.S., Dikov, I.A., Chertis chev, V.Y., Generalov, A.S., Opredelenie poristosti monolitnykh zon detalei i agregatov samoleta, izgotavlivaemykh iz PKM, s primeneniem ultrazvukovogo ekhoimpulsnogo metoda [Determination of porosity of monolithic zones of aircraft parts and assemblies made of PCM using ultrasonic echo pulse method], Defektoskopiya, 2019, No 1, pp. 3–9. DOI: 10.1134/S01303082190100019
13. Dikov, I.A., Boi chuk , A.S., Sposoby opredeleniya obiemnoi doli por v polimernykh kompozitsionnykh materialakh s pomoschyu ultrazvukovykh metodov nerazrushayuschego kontrolya [Methods for determining the volume fraction of pores in polymer composite materials using ultrasonic methods of nondestructive testing], Trudy VIAM, 2017, No 2 (50), pp. 80–95. URL: http://www.viam-works.ru. DOI: 10.18577/2307-6046-2017-0-2-10-10
14. Boi chuk , A.S., Dikov, I.A., Chertishchev, V.Y., Generalov, A.S.,Otsenka vozmozhnosti opredeleniya poristosti v ugleplastike ultrazvukovym tenevym metodom [Evaluation of the possibility of determining porosity in carbon fiber by ultrasonic shadow method], Trudy VIAM, 2017, No 7(55). URL: http://www.viam-works.ru. DOI: 10.18577/2307-6046-2017-0-7-11-11
15. Boichuk , A.S., Dikov, I.A., Chertishchev, V.Y., Generalov, A.S., Slavin , A.V., Vliyanie morfologii por na ultrazvukovoi kontrol poristosti v ugleplastike ekhoimpulsnym metodom [Effect of pore morphology on ultrasonic porosity control in carbon fiber by echo pulse method], Kontrol. Diagnostika, 2018, No 8, pp. 22–29. DOI: 10.14489/td.2018.08.pp.022-029.
Review
For citations:
Yakovleva S.I., Dalin M.A., Krupnina O.A., Krupennikov V.A. Study of the attenuation of ultrasonic oscilliations in 3D-orthogonal woven composite. Voprosy Materialovedeniya. 2023;(1(113)):83-93. (In Russ.) https://doi.org/10.22349/1994-6716-2023-113-1-83-93
Views:
164
Email this article 