Generate QR code
Open Access
Subscription Access
Technology development and material science substantiation of cold bending for ship hulls parts of high-strength steels and alloys by local deformation
https://doi.org/10.22349/1994-6716-2018-96-4-67-77
Abstract
At JSC “PO “Sevmash” a technology of cold bending for ship hull parts from high-strength steels and alloys has been developed by the method of local deformation. A material science substantiation of its implementation has been given. In addition to the practical positive side of parts manufacturing, the local deformation is cost-effective and can significantly reduce the cost of manufacturing parts.
About the Authors
M. A. Budnichenko
JSC PO Sevmash
Russian Federation
Russian Federation
Cand Sc. (Eng)
58 Arkhangelskoe Shosse, 164500, Severodvinsk
L. M. Vainer
JSC PO Sevmash
Russian Federation
58 Arkhangelskoe Shosse, 164500, Severodvinsk
Russian Federation
58 Arkhangelskoe Shosse, 164500, Severodvinsk
L. E. Berezansky
JSC PO Sevmash
Russian Federation
58 Arkhangelskoe Shosse, 164500, Severodvinsk
Russian Federation
58 Arkhangelskoe Shosse, 164500, Severodvinsk
References
1. Kuklin, O.S., Levshakov, V.M., Formoobrazovanie elementov torosfericheskikh konstruktsii [Formation of torospheric constructions elements], Compilations of Morintekh-2001 SPB Research Center Morintekh reports, 2001.
2. Kuklin, O.S., Levshakov, V.M., Popov, V.I., Osvoenie peredovykh tekhnologii formoobrazovaniya elementov korpusnykh konstruktsii [Mastering of advancedtechnologies of body constructions elements forming], Sudostroenie, 2004, No 5.
3. Berezansky, L.E., Kuklin, O.S., Levshakov, V.M., Shungin, V.Yu., Rezultaty primeneniya tekhnologii kholodnoi gibki metodom PLD detalei pereborok osnovnogo korpusa podvodnykh korablei na AO «PO «Sevmash»[Results of application of technology of cold bending by PLD method of details of bulkheads of main body of underwater ships on AO «AO «PO Sevmash»], Proceedings of the scientific conference «Stanovlenie I razvitie atomnogo podvodnogo korablestroeniyana AO «PO Sevmash», dedicated to memory of Slesarevich, S.V., Severodvinsk, ISMART, SAFU, 2015.
4. Shungin, V.Yu., Formoobrazovanie kontsevykh pereborok osnovnogo korpusa podvodnykh apparatov [Formation of terminal bulkheads of underwater machines main body], Proceedings of scientifictechnical conference dedicated tothe memory of P.F. Popovich, The Krylov State Research Centre, 2009.
5. Vainer, L.M., Kuklin, O.S., Kulikov, V.P., Shungin, V.Yu., Razvitie tekhnologii formoobrazovaniya tolstostennykh listovykh zagotovok metodom posledovatelnogo lokalnogo deformirovaniya [Development of technologies offormation of thick-walled sheet blanks by consistent local deformation method], Vestnik Tekhnologii Sudostroeniya, 2010, No 18.
6. Patent RU 2443488, Russian Federation. Method of forming parts of moulded-welded shells of spherical and elliptical shape.Publ. 27.02.2012. Bull. 6.
7. Patent RU 2566127, Russian Federation. Method of formation of twofold curvature sheet. Publ. 20.10.2015.
Review
For citations:
Budnichenko M.A., Vainer L.M., Berezansky L.E. Technology development and material science substantiation of cold bending for ship hulls parts of high-strength steels and alloys by local deformation. Voprosy Materialovedeniya. 2018;(4(96)):67-77. (In Russ.) https://doi.org/10.22349/1994-6716-2018-96-4-67-77
Views:
430
Email this article 