|Generate QR code
Open Access
Subscription Access
Studying mechanical characteristics of fiber-metal laminate based on aluminum sheets and layers of carbon fiber reinforced plastics
https://doi.org/10.22349/1994-6716-2018-96-4-86-96
Abstract
Results of tensile strength test of layered metal-polymer composite material on the basis of aluminum alloy sheets and layers of carbon fiber reinforced plastics were analyzed. The efficiency of complex anticorrosive protection from the influence of external factors was studied.
Supporting agencies: The research was carried out within the framework of the “Strategic directions for the development of materials and technologies for their processing for the period up to 2030” (6.2: Layered crack-resistant high-strength metal-polymeric materials).
About the Authors
S. I. Voinov
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
17 Radio St, 105005 Moscow
Russian Federation
17 Radio St, 105005 Moscow
G. F. Zhelezina
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
Russian Federation
Cand Sc. (Eng)
17 Radio St, 105005 Moscow
A. V. Ilichev
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
17 Radio St, 105005 Moscow
Russian Federation
17 Radio St, 105005 Moscow
N. A. Solovieva
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
17 Radio St, 105005 Moscow
Russian Federation
17 Radio St, 105005 Moscow
References
1. Kablov, E.N., Sovremennye materialy – osnovainnovatsionnoi modernizatsii Rossii [Modern materials are the basis of innovate modernization of Russia], Metally Evrazii, 2012, No 3, pp. 10–15.
2. Kablov, E.N., Materialy i khimicheskie tekhnologii dlya aviatsionnoi tekhniki [Materials and chemical technologies for aircraft engineering], Vestnink Rossiiskoi Akademii Nauk, 2012, V. 82, No 6, pp. 520–530.
3. Gunyaev, G.M., Krivonos, V.V., Rumyantsev, A.F., Zhelezina, G.F., Polimernye kompozitsionnye materialy v konstruktsiyakh letatelnykh apparatov [Polymeric composite materials in aircraft constructions], Konversiya v Mashinostroenii, 2004, No 4 (65), pp. 65–69.
4. Grashchenkov, D.V., Chursova, L.V., Strategii razvitiya kompozitsionnykh i funktsionalnykh materialov [Strategies of development of composite and functional materials], Aviatsionnye Materialy i Tekhnologii, 2012, No S, pp. 231–241.
5. Kablov, E.N., Materialy i tekhnologii VIAM dlya Aviadvigatelya [Materialsand technologies of VIAM for Aviadvigatel], Permskie Aviatsionnye Dvigateli, 2014, No 31, pp. 43–47.
6. Grabilnikova, A.S., Mashinskaya, G.P., Zhelezina, G.F., Zinevich, O.M., Deev, I.S., Mezhsloinaya treshchinostoikost gibridnogo kompozitnogo materiala ALOR [Interlayer crackresistance of the hybrid composite ALOR material], Mekhanika Kompozitnykh Materialov., 1994, V. 30, No 2, pp. 136–145.
7. Mashinskaya, G.P., Zhelezina, G.F., Senatorova, O.G., Laminated Fibrous Metal – Polymer Composites Soviet Advanced Composites Technology Series, Chapman & Hall, 1995, pp. 487–570.
8. Postnov, V.I., Senatorova, O.G., Karimova, S.A., Pavlovskaya, T.G., Zhelezina, G.F., Kazakov, I.A., Abramov, P.A., Postnova, M.V., Kotov, O.E., Osobennosti formirovaniya krupnogabaritnykh listov metallopolimernykh KM, ikh struktura i svoistva [Forming features of large-sized metal-polymeric plates, its structure and properties], Aviatsionnye Materialy i Tekhnologii, 2009, No 4, pp. 23–32.
9. Postnov, V.I., Senatorova, O.G., Zhelezina, G.F., Kazakov, I.A., Abramov, P.A., Gerasimov, V.A., Postnova, M.V., Opyt primeneniya MPKM ALOR D16/41 v nosovoi chasti samoleta AN-124-100 [Experience of application of MPKM ALOR D16/41 in the Wing Fore of AN-124-100 airplane], Aviatsionnye Materialy i Tekhnologii, 2009, No 4, pp. 8–17.
10. Deev, I.S., Zhelezina, G.F., Fraktograficheskii analiz sloistogo metallopolimernogo kompozita alor posle ispytanii na treshchestoikost [Fractographic analysis of layered metal-polymer ALOR composite after crack-resistance tests], Kompozity i Nanostruktury, 2015, V. 7, No 3, pp. 162–176.
11. Antipov, V.V., Senatorova, O.G., Lukina, N.F., Sidelnikov, V.V., Shesto v, V.V., Sloistye metallopolimernye kompozitsionnye materialy [Laminate metal-polymeric composite materials], Aviatsionnye Materialy i Tekhnologii, 2012, No S, pp. 226–230.
12. Laurens, B.V., Development of a new hybrid material (ARALL) for aircraft structures, Industrial & Engineering Chemistry, 1983, No 22, pp. 492–496.
13. Gunnink, J.W., Vlot, A., De Vries, T.J., Van Der Hoeven, W., Glare technology development 1997–2000, Applied Composite Materials, 2002, No 9, pp. 201–219.
14. Botelho, E.C., Campos, A.N., de Barros, E., Pardini, L.C., Rezende, M.C., Damping behavior of continuous fiber/metal composite materials by the free vibration method, Composites: Part B 37, 2006, pp. 255–263.
15. Voinov, S.I., Zhelezina, G.F., Pavlovskaya, T.G., Volkov, I.A., Problema kontaktnoi korrozii pri sozdanii sloistykh metallopolimernykh kompozitsionnykh materialov na osnove alyuminiya i ugleplastika [Contact corrosion problem in the creation of layered metal-polymeric compositional aluminum- and carbon fiber-based materials], Voprosy Materialovedeniya, 2016, No 1 (85), pp. 127–133.
16. Almeida, R.S., Damato, C.A., Botelho, E.C., Pardini, L.C., Rezende, M.C., Effect of surface treatment on fatigue behavior of metal/carbon fiber laminates, J Mater Sci., No 43, 2008, pp. 3173–3179.
17. Pavlovskaya, T.G., Kozlov, I.A., Volkov, I.A., Zakharov, K.E., Formirovanie tverdyh iznosostoikikh anodno-oksidnykh pokrytii na detalyakh iz liteinykh alyuminievykh splavov [Forming of solid wear-resistant anode-oxide coatings on casting aluminum alloy details], Trudy VIAM, 2015, No 8, DOI: 10.18577/2307-6046-2015-0-8-4-4 (reference date 27/04/2018).
18. Pavlovskaya, T.G., Volkov, I.A., Kozlov, I.A., Naprienko, S.A., Ekologicheski uluchshennaya tekhnologiya obrabotki poverkhnosti alyuminievykh splavov [Ecologically improved technology of aluminum alloys surface treatment], Trudy VIAM, 2016, No 7, DOI: 10.18577/2307-6046-2016-0-7-2-2 (reference date 27/04/2018).
19. Ostapiuka, M., Surowskaa, B., Bienias, J., Interface analysis of fiber metal laminates. Composite Interfaces, 2014, V. 21, No 4, pp. 309–318.
20. Voinov, S.I., Zhelezina, G.F., Volkov, I.A., Solov′eva, N.A., Ingibitory korrozii v sostave sloistogo metallopolimernogo kompozitsionnogo materiala na osnove alyuminiya i ugleplastika [Corrosion inhibitors in layered metal-polymeric compositional aluminum- and carbon fiber-based material],Trudy VIAM, 2017, No 4, p. 6, DOI: 10.18577/2307-6046-2017-0-4-6-6 (reference date 27/04/2018).
21. Karimova, S.A., Pavlovskaya, T.G., Razrabotka sposobov zashchity ot korrozii konstruktsii, rabotayushchikh v usloviyakh kosmosa [Development of corrosion protection methods of constructions working in space], Trudy VIAM, 2013, No 4,(reference date 27/04/2018).
22. Kablov, E.N., Karimova, S.A., Semenova, L.V., Korrozionnaya aktivnost’ ugleplastikov i zashchita metallicheskikh silovykh konstuktsii v kontakte s ugleplastikom [Corrosion activity of carbon fibers and protection of metal power constructions in contact with carbon fiber], Korroziya: Materialy, Zashchita, 2011, No 12, pp. 1–7.
23. Kablov, E.N., Startsev, O.V., Medvedev, I.M., Obzor zarubezhnogo opyta issledovanii korrozii i sredstv zashchity ot korrozii [Overview of developments of corrosion and way of corrosion protection foreign experience], Aviatsionnye Materialy i Tekhnologii, 2015, No 2, pp. 76–87, DOI: 10.18577/2071-9140-2015-0-2-76-87.
24. Kablov, E.N., Innovatsionnye razrabotki “VIAM” po realizatsii Strategicheskikh napravlenii razvitiya materialov i tekhnologii ikh pererabotki na period do 2030 goda [Innovate developments of the AllRussian Scientific Research Institute of Aviation Materials within the project of Strategic development of materials and technologies oftheir recycling until 2030], Aviatsionnye Materialy i Tekhnologii, 2015, No 1, pp. 3–33, DOI: 10.18577/2071-9140-2015-0-1-3-33.
25. Kozlova, L.S., Sibileva, S.V., Chesnokov, D.V., Kutyrev, A.E., Ingibitory korrozii (obzor) [Inhibitors of corrosion (overview)], Aviatsionnye Materialy i Tekhnologii, 2015, No 2, pp. 67–75, DOI: 10.18577/2071-9140-2015-0-2-67-75.
26. Voinov, S.I., Zhelezina, G.F., Soloveva, N.A., Vliyanie iskhodnykh komponentov na mekhanicheskie kharakteristiki sloistogo metallopolimernogo kompozitsionnogo materiala “alyuminiiugleplastik” [Influence of initial component on mechanical characteristics of layered metal-polymeric composition aluminum–carbon fiber material], Materialovedenie, 2017, No 5, pp. 38–42.
Review
For citations:
Voinov S.I., Zhelezina G.F., Ilichev A.V., Solovieva N.A. Studying mechanical characteristics of fiber-metal laminate based on aluminum sheets and layers of carbon fiber reinforced plastics. Voprosy Materialovedeniya. 2018;(4(96)):86-96. (In Russ.) https://doi.org/10.22349/1994-6716-2018-96-4-86-96
Views:
397
Email this article 