Generate QR code
Open Access
Subscription Access
Heat treatment effects on the mechanical properties and cold resistance of medium-carbon medium-alloyed high-strength steels
https://doi.org/10.22349/1994-6716-2024-119-3-17-26
Abstract
The paper studies heat treatment effects on the mechanical properties and cold resistance of medium-carbon, medium-alloyed high-strength cold-resistant steels. Kind of changes in strength and plastic properties depending on the tempering temperature have been revealed. It has been established, that tempering in the temperature range 560–580°C provides an optimal combination of strength and plastic properties and makes it possible to increase the cold resistance of the steel.
About the Authors
Yu. V. Veretennikova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
G. D. Motovilina
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
E. I. Khlusova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc (Eng)
49 Shpalernaya St, 191015 St Petersburg
E. A. Yakovleva
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
References
1. Kasatkin, R.G., Rol Severnogo morskogo puti v Arkticheskoi transportnoi sisteme [The role of the Northern Sea Route in the Arctic transport system], Regionalnaya ekonomika: teoriya i praktika, 2008, No 23 (80), pp. 50–55.
2. Merzlikin, V.V., Osnovnye aspekty ekspluatatsionnoi nadezhnosti akvatorii i podkhodnykh kanalov morskikh portov [Main aspects of the operational reliability of water areas and approach channels of seaports], Transport business in Russia, 2015, No 5, pp. 169–170.
3. Zaytseva, S.A., Arkticheskaya gidrografiya [Arctic hydrography], Vestnik Atomproma, 2022, No 8, pp. 24–27.
4. Ezhov, Ye.Yu., Pogodaev, L.I., Kuzmin, A.A., Povyshenie nadezhnosti vedushchikh detaley rabochikh ustroistv sudov tekhnicheskogo flota [Increasing the reliability of leading parts of working devices of technical fleet vessels], Vestnik gosudarstvennogo universiteta morskogo i rechnogo flota im. admirala S.O. Makarova, 2012, No 4, pp. 37–45.
5. Poletskov, P.P., Gulin, A.Ye., Emaleeva, D.G., et al. Analiz aktualnykh napravleny issledovany v oblasti proizvodstva mnogofunktsionalnykh materialov dlya ekstremalnykh usloviy ekspluatatsii [Analysis of current areas of research in the production of multifunctional materials for extreme operating conditions], Novye tekhnologicheskie protsessy i oborudovanie: Vestnik MGTU im. G.I. Nosova, 2021, V. 19, No 3, pp. 109–114.
6. Petrovsky, V.A., Ruban, A.R., Salamekh, A., Nekotorye rezultaty ispytany obraztsov na abrazivny iznos [Some results of testing samples for abrasive wear], Vestnik Dagestanskogo gosudarstvennogo tekhnicheskogo universiteta. Tekhnicheskie nauki, 2017, No 44 (4), pp. 40–48.
7. Petrovsky, V.A., Ruban, A.R., Rezultaty issledovaniya abrazivnogo iznosa detaley cherpakovoy tsepi zemsnaryada [Results of a study of abrasive wear of parts of a dredger’s scoop chain], Vestnik Astrakhanskogo gosudarstvennogo tekhnicheskogo universiteta. Ser.: Morskaya tekhnika i tekhnologiya, 2014, No 1, pp. 94–99.
8. Poletskov, P.P., Gushchina, M.S., Berezhnaya, G.A., et al., Issledovaniye vliyaniya rezhimov termicheskoy obrabotki na mekhanicheskie svoistva vysokoprochnogo listovogo prokata [Study of the influence of heat treatment modes on the mechanical properties of high-strength rolled sheets], Vestnik MGTU im. G.I. Nosova, 2015, No 4 (52), pp. 88–92.
9. Knyazyuk, T.V., Mikhailov, M.S., Motovilina, G.D., Ryabov, V.V., Khlusova, E.I., Struktura i svoistva novykh iznosostoykikh staley dlya selskokhozyaistvennogo mashinostroeniya [Structure and properties of new wear-resistant steels for agricultural engineering], Voprosy Materialovedeniya, 2016, No 2 (86), pp. 7–19.
10. Patent RU 2 606 825 C1: Vysokoprochnaya iznosostoikaya stal dlya selskokhozyaistvennykh mashin (varianty) [High-strength wear-resistant steel for agricultural machines (options)], E.I. Khlusova, S.A. Golosienko, V.V. Ryabov, et al., Appl. 2015125002, Publ. 10.01.2017.
11. Ryabov, V.V., Khlusova, E.I., Golosienko, S.A., Fazovye prevrashcheniya, struktura i svoistva novykh vysokoprochnykh staley s predelom tekuchesti 1200–1700 MPa dlya detaley rabochikh organov selskokhozyaistvennykh mashin [Phase transformations, structure and properties of new high-strength steels with a yield strength of 1200–1700 MPa for working parts of agricultural machines], Metallurg, 2015, No 6, pp. 48–68.
12. Golosienko, S.A., Motovilina, G.D., Khlusova, E.I., Vliyanie struktury, sformirovannoy pri zakalke na svoistva vysokoprochnoy khladostoikoy stali posle otpuska [The influence of the structure formed during hardening on the properties of high-strength cold-resistant steel after tempering], Voprosy Materialovedeniya, 2008, No 1 (53), pp. 32–44.
Review
For citations:
Veretennikova Yu.V., Motovilina G.D., Khlusova E.I., Yakovleva E.A. Heat treatment effects on the mechanical properties and cold resistance of medium-carbon medium-alloyed high-strength steels. Voprosy Materialovedeniya. 2024;(3(119)):17-26. (In Russ.) https://doi.org/10.22349/1994-6716-2024-119-3-17-26
Views:
114
Email this article 