

Effect of ruthenium microadditives on the structure and corrosion resistance of titanium α-, pseudo-α-alloys
https://doi.org/10.22349/1994-6716-2024-119-3-196-209
Abstract
The paper examines electrochemical studies of forgings made of α, pseudo-α titanium alloys of industrial compositions and with the addition of ruthenium. Comparative dependences of the current density on time were constructed at various potentials in 3.5% NaCl for titanium alloys of industrial composition and with the addition of ruthenium. The breakdown potential of the titanium alloys under study was determined. Microstructural studies of titanium alloys of various compositions were carried out after determining the breakdown potential.
About the Authors
V. P. LeonovRussian Federation
Dr Sc (Eng)
49 Shpalernaya St, 191015 St Petersburg
Yu. Yu. Malinkina
Russian Federation
Cand. Sc (Eng)
49 Shpalernaya St, 191015 St Petersburg
O. A. Stavitsky
Russian Federation
Cand. Sc (Eng)
49 Shpalernaya St, 191015 St Petersburg
P. I. Malashev
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
O. N. Parmenova
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
Yu. M. Markova
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. Oryshchenko, A.S., Kuzmin, Yu.L., Troshchenko, V.N., Medyanik, T.E., Podshivalov, A.V., Stavitsky, O.A., Dolgovremennaya elektrokhimicheskaya zashchita ot korrozionno-erozionnykh razrusheny v nedokuemykh morskikh sooruzheny dlya neftegazodobychi na shelfe Arkticheskikh morei [Long-term electrochemical protection against corrosion and erosion damage in the underfloor of offshore structures for oil and gas production on the shelf of the Arctic seas], Praktika protivokorrozionnoj zashchity, 2013, No 2 (68), pp. 56–68.
2. Kalinin, G.Yu., Stavickij, O.A., Zashchita ot korrozii korpusov sudov i morskoi tekhniki [Corrosion protection of ship hulls and marine equipment], Novy oboronny zakaz. Strategii, 2018, No 6, pp. 60–62.
3. Nikolaev, G.I., Kuzmin, Yu.L., Lishevich, I.V., Stavitsky, O.A., et al., Etapy sozdaniya sistem katodnoi zashchity ot korrozii korpusov atomnykh ledokolov i arkticheskikh morskikh sooruzheny [Stages of creation of cathodic corrosion protection systems for nuclear icebreaker hulls and Arctic offshore structures], Voprosy Materialovedeniya, 2021, No 3 (107), pp. 150–162
4. Mikhailov, B.N., Nemykina, O.V., Korrozionnoe povedenie titana v khloridno-gidroksidnykh rastvorakh proizvodstva khlora i kaustika [Corrosion behavior of titanium in chloride-hydroxide solutions of chlorine and caustic production], Polzunovskij vestnik, 2008, No 3, pp. 256–257.
5. Povarova, L.V., Kashcheeva, E.A., Bibikov, N.N., Issledovanie anodnoi polyarizatsii titana v morskoi vode [Investigation of the anodic polarization of titanium in seawater], Trudy CNIITS, 1973, V. 156, pp. 53–59.
6. Tomashov, N.D., Titan i korrozionnostoikie splavy na ego osnove [Titanium and corrosion-resistant alloys based on it], Moscow: Metallurgiya, 1985.
7. Hua, F., Mon, K., Pasupathi, P., Gordon, G., Corrosion of TI Grade 7 and other TI alloys in nuclear waste repository environments: a review, NACE International CORROSION, 2004, No 04689, 2004.
8. Chechulin, B.B., Parogeneratory – borba za resurs [Steam generators – the struggle for a resource], Po puti sozidaniya, I.V. Gorynin (Ed.), St Petersburg: TsNII KM “Prometey”, 2009, V. 1.
9. Scherbinin, V.F., Leonov, V.P., Malinkina, Yu.Yu., Increase in corrosion resistance of titanium alloy in concentrated aqueous solutions of chlorides at high temperatures, Inorganic Materials: Applied Research, 2013, V. 4, Is. 6, pp. 537–541.
10. Leonov, V.P., Chudakov, E.V., Rtishcheva, L.P., Malinkina, Yu.Yu., Tryaev, P.V., Mikhailov, A.S., Pryakhin, D.A., Issledovanie vliyaniya ruteniya na korrozionnye svoistva deformirovannykh polufabrikatov iz titanovykh splavov dlya perspektivnoi grazhdanskoi morskoi tekhniki [Investigation of the effect of ruthenium on the corrosion properties of deformed semi-finished products made of titanium alloys for advanced civil marine equipment], Titan, 2016, No 3 (53), pp. 19–28.
11. GOST 19807–91: Titan i splavy titanovye deformiruemye. Marki [Deformable titanium and titanium alloys. Grades], Moscow: Izdatelstvo standartov, 2011.
12. Leonov, V.P., Chudakov, E.V., Malinkina, Yu.Yu., The influence of micro additives of Ru on the structure, corrosive-mechanical strength and fractography of destruction of pseudo-alpha-Ti alloys, Inorganic Materials: Applied Research, 2017,V. 8, No 4, pp. 556–565.
13. Leonov, V.P., Chudakov, E.V., Tretyakova, N.V., Malinkina, Yu.Yu., Petrov, S.N., Tsemenko, A.V., Vasilieva, E.A., Research of the peculiarities of ruthenium distribution in titanium α-, pseudo-α- and pseudo-β-alloys and its effects on corrosion resistance, Inorganic Materials: Applied Research, 2021,V. 12, No 6, pp. 1450–1458.
Review
For citations:
Leonov V.P., Malinkina Yu.Yu., Stavitsky O.A., Malashev P.I., Parmenova O.N., Markova Yu.M. Effect of ruthenium microadditives on the structure and corrosion resistance of titanium α-, pseudo-α-alloys. Voprosy Materialovedeniya. 2024;(3(119)):196-209. (In Russ.) https://doi.org/10.22349/1994-6716-2024-119-3-196-209