Generate QR code
Open Access
Subscription Access
Magnetic properties of alloy powders of the Co-Ni-Al system with a composition close to equiatomic, obtained by the mechanical alloying
https://doi.org/10.22349/1994-6716-2024-120-4-46-58
Abstract
The article presents the results of the study of the structure and magnetic characteristics of powders of Co–Ni–Al alloys of the compositions Co37Ni36Al27 and Co32Ni39Al29 obtained by mechanical alloying in a planetary mill. The influence of alloying technological modes on the elemental composition of powders, their saturation magnetization and coercive force, is studied. The mechanical alloying efficiency for obtaining new hard magnetic alloys based on the Co–Ni–Al system is shown.
Keywords
Supporting agencies: The work was supported by the Russian Science Foundation, grant No 23-13-00305 Magnetic characteristics were measured using the equipment of the Science Park of St Petersburg State University, in the resource center “Innovative technologies of composite nanomaterialsˮ
About the Authors
A. K. Mazeeva
Peter the Great St Petersburg Polytechnic University
Russian Federation
Russian Federation
Cand Sc. (Eng).
29, Polytechnicheskaya St, 195251 St Petersburg
A. E. Kim
Peter the Great St Petersburg Polytechnic University
Russian Federation
Russian Federation
29, Polytechnicheskaya St, 195251 St Petersburg
E. V. Volokitina
Peter the Great St Petersburg Polytechnic University
Russian Federation
Russian Federation
29, Polytechnicheskaya St, 195251 St Petersburg
D. V. Nazarov
St Petersburg State University
Russian Federation
Russian Federation
Cand Sc. (Chem).
7/9 Universitetskaya Emb., 199034 St Petersburg
M. V. Staritsyn
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
D. V. Masailo
Peter the Great St Petersburg Polytechnic University
Russian Federation
Russian Federation
Cand Sc. (Eng).
29, Polytechnicheskaya St, 195251 St Petersburg
References
1. Zhang, C., Li, X., Jiang, L., Tang, D., Xu, H., Zhao, P. , Fu, J., Zhou, Q., Chen, Y. , 3D-Printing of Functional Magnetic Materials: From Design to Applications, Adv. Funct. Mater., 2021, V. 31. URL: https://doi.org/10.1002/adfm.202102777
2. Mazeeva, A.K., Masaylo, D., Razumov, N., Konov, G., Popovich, A., 3D-Printing Technologies for Fabrication of Magnetic Materials Based on Metal–Polymer Composites: review, Materials (Basel), 2023, V. 16. URL: https://doi.org/10.3390/ma16216928
3. Cao, X., Xuan, S., Sun, S., Xu, Z., Li, J., Gong, X., 3D-Printing Magnetic Actuators for Biomimetic Applications, ACS Appl. Mater. Interfaces., 2021, V. 13, pp. 30127–30136. URL: https://doi.org/10.1021/acsami.1c08252
4. Qi, S., Guo, H., Fu, J., Xie, Y. , Zhu, M., Yu, M., 3D-printed shape-programmable magneto-active soft matter for biomimetic applications, Compos. Sci. Technol., 2020, V. 188, p. 107973. URL: https://doi.org/10.1016/j.compscitech.2019.107973
5. Huber, C., Abert, C., Bruckner, F., Groenefeld, M., Muthsam, O., Schuschnigg, S., Sirak, K., Thanhoffer, R., Teliban, I., Vogler, C., Windl, R., Suess, D., 3D-print of polymer bonded rare-earth magnets, and 3D magnetic field scanning with an end-user 3D printer, Appl. Phys. Lett., 2016, V. 109. URL: https://doi.org/10.1063/1.4964856
6. Shen, A., Peng, X., Bailey, C.P., Dardona, S., Ma, A.W.K., 3D printing of polymer-bonded magnets from highly concentrated, plate-like particle suspensions, Mater. Des., 2019, V. 183, p. 108133. URL: https://doi.org/10.1016/j.matdes.2019.108133
7. Shen, A., Bailey, C.P., Ma, A.W.K., Dardona, S., UV-assisted direct write of polymer-bonded magnets, J. Magn. Magn. Mater., 2018, V. 462, pp. 220–225. URL: https://doi.org/10.1016/j.jmmm.2018.03.073
8. Huber, C., Mitteramskogler, G., Goertler, M., Teliban, I., Groenefeld, M., Suess, D., Additive manufactured polymer-bonded isotropic NdFeB magnets by stereolithography and their comparison to fused filament fabricated and selective laser sintered magnets, Materials (Basel), 2020, V. 13, pp. 1–8. URL: https://doi.org/10.3390/MA13081916
9. Urban, N., Kuhl, A., Glauche, M., Franke, J., Additive Manufacturing of Neodymium-Iron-Boron Permanent Magnets, 8th Int. Electr. Drives Prod. Conf. EDPC, 2018, Proc. 2019, pp. 2–6. https://doi.org/10.1109/EDPC.2018.8658348
10. Li, L., Post, B., Kunc, V. , Elliott, A.M., Paranthaman, M.P., Additive manufacturing of near-net-shape bonded magnets: Prospects and challenges, Scr. Mater., 2017, V. 135, pp. 100–104. URL: https://doi.org/10.1016/j.scriptamat.2016.12.035
11. Povarova, K.B., Lomberg, B.S., Filin, S.A., Kazanskaya, N.K., Shkolnikov, D.Yu., Bespalova, M.D., Struktura i svoistva (β+γ)-splavov sistemy Ni–Al–Co [Structure and properties of (β+γ) alloys of the Ni–Al–Co system], Metally, 1994, pp. 77–81.
12. Kositsyna, I.I., Zavalishin, V.A., Study of Co-Ni-Al alloys with magnetically controlled shape memory effect, Mater. Sci. Forum., 2010, V. 635, pp. 75–80. URL: https://doi.org/10.4028/www.scientific.net/MSF.635.75
13. Valiullin, A.I., Kositsin, S. V. , Kositsina, I.I., Kataeva, N. V. , Zavalishin, V.A., Study of ferromagnetic Co-Ni-Al alloys with thermoelastic L10 martensite, Mater. Sci. Eng. A., 2006, V. 438, pp. 1041–1044. URL: https://doi.org/10.1016/j.msea.2006.01.102
14. Tanaka, Y. , Oikawa, K., Sutou, Y. , Omori, T., Kainuma, R., Ishida, K., Martensitic transition and superelasticity of Co-Ni-Al ferromagnetic shape memory alloys with β + γ two-phase structure, Mater. Sci. Eng. A., 2006, V. 438–440, pp. 1054–1060. URL: https://doi.org/10.1016/j.msea.2006.05.021
15. Morito, H., Oikawa, K., Fujita, A., Fukamichi, K., Kainuma, R., Ishida, K., Large magnetic-field-induced strain in Co-Ni-Al single-variant ferromagnetic shape memory alloy, Scr. Mater., 2010, V. 63, pp. 379–382. URL: https://doi.org/10.1016/j.scriptamat.2010.04.026
16. Su, J.J., Mo, K.X., Zhou, L., Effects of Minor Mn Replace of Al on Martensitic and Magnetic Transition in the Co38Ni34Al28-xMnx Alloys, J. Supercond. Nov. Magn., 2020, V. 33, pp. 835–840. URL: https://doi.org/10.1007/s10948-019-05272-9
17. Ju, J., Lou, S., Yan, C., Yang, L., Li, T., Hao, S., Wang, X., Liu, H., Microstructure, Magnetism and Magnetic Field Induced-Strain in Er-Doped Co-Ni-Al Polycrystalline Alloy, J. Electron. Mater., 2017, V. 46, pp. 2540–2547. URL: https://doi.org/10.1007/s11664-017-5339-6
18. Hossain, M.S., Ghosh, T., Kanth, B.R., Mukhopadhyay, P.K., Effect of Annealing on the Structural and Magnetic Properties of CoNiAl FSMA, Cryst. Res. Technol., 2019, V. 54, pp. 1–6. URL: https://doi.org/10.1002/crat.201800153
19. Saito, T., Magnetic properties of Co–Al–Ni melt-spun ribbon, J. Appl. Phys., 2006, V. 100 (5), pp. 053916–053916-5. URL: https://doi.org/10.1063/1.2345577
20. Arputhavalli, G.J., Agilan, S., Saravanan, P. , Influence of sintering temperature on microstructure, magnetic properties of vacuum sintered Co (-Zn)-Ni-Al alloys, Mater. Lett., 2018, V. 233, pp. 177–180. URL: https://doi.org/10.1016/j.matlet.2018.08.152
21. Sychev, A.E., Basurina, M.L., Boyarchenko, O.D., Lazarev, P.A., Morozov, Yu.G., Sivakova, A.O., Osobennosti strukturoi fazoobrazovaniya v sisteme Ni-Al-Co v protsesse SVS [Features of structure and phase formation in the Ni-Al-Co system during the SHS process], Neorganicheskie Materialy, 2023, V. 59, pp. 733–739. URL: https://doi.org/10.31857/S0002337X23070151
22. Mazeeva, A.K., Kim, A., Ozerskoi, N.E., Shamshurin, A.I., Razumov, N.G., Nazarov, D. V. , Popovich, A.A., Structure evolution of Ni36Al27Co37 alloy in the process of mechanical alloying and plasma spheroidization, Metals (Basel), 2021, V. 11. URL: https://doi.org/10.3390/met11101557
23. Mazeeva, A.K., Kim, A., Shamshurin, A.I., Razumov, N.G., Nazarov, D. V. , Borisov, A.N., Popovich, A.A. , Effect of heat treatment on structure and magnetic properties of Ni36Co37Al27 alloy produced by laser powder bed fusion, J. Alloys Compd., 2023, V. 938. URL: https://doi.org/10.1016/j.jall-com.2022.168461
24. Kim, A., Mazeeva, A., Polozov, I., Shamshurin, A., Starikov, K., Igoshin, S., Ozerskoy, N., Popovich, A., Additive manufacturing of Ni36Co37Al27 ferromagnetic shape memory material using mechanically alloyed plasma spheroidized powders, Met. 2021 – 30th Anniv. Int. Conf. Metall. Mater. Conf. Proc., 2021, pp. 958–963. URL: https://doi.org/10.37904/metal.2021.4241
25. Ghasemi, A., Zamani, K., Tavoosi, M., Gordani, G.R., Enhanced Soft Magnetic Properties of CoNi-Based High Entropy Alloys, J. Supercond. Nov. Magn., 2020, V. 33, pp. 3189–3196. URL: https://doi.org/10.1007/s10948-020-05579-y
26. Shelekhov, E. V. ., Sviridova, T.A., Modelirovanie dvizheniya i razogreva sharov v planetarnoi melnitse. Vliyanie rezhimov obrabotki na produkty mekhanoaktivatsii smesi poroshkov Ni i Nb [Simulation of the motion and heating of balls in a planetary mill. The effect of processing modes on the products of mechanical activation of a mixture of Ni and Nb powders], Materialovedenie, 1999, No 10, pp. 13–22.
Review
For citations:
Mazeeva A.K., Kim A.E., Volokitina E.V., Nazarov D.V., Staritsyn M.V., Masailo D.V. Magnetic properties of alloy powders of the Co-Ni-Al system with a composition close to equiatomic, obtained by the mechanical alloying. Voprosy Materialovedeniya. 2024;(4(120)):46-58. (In Russ.) https://doi.org/10.22349/1994-6716-2024-120-4-46-58
Views:
35
Email this article 