Generate QR code
Open Access
Subscription Access
Influence of complex modification on gas content in shipbuilding steel
https://doi.org/10.22349/1994-6716-2025-121-1-15-23
Abstract
Behavior of gases at the stages of production of high-strength vessel steel made with REM complex material and standard technology of steel modification by ferrocalcium has been investigated. It has been shown that the nitrogen content in steel increases regardless of which of the tested modifying treatment methods was used, from liquid castings to sheet metal rolling.
Oxygen content regardless of the modifying method increases in liquid metal including casting, after which it decreases significantly in slab and sheets. Modification of high-strength vessel steel by complex alloys with REM allows to reduce the hydrogen content in the metal.
About the Authors
B. G. Milyuts
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
V. V. Tsukanov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc. (Eng),
49 Shpalernaya St, 191015 St Petersburg
References
1. Morozov, A.N., Vodorod i azot v stali [Hydrogen and nitrogen in steel], Moscow: Metallurgiya.
2. Vodorod v stali [Hydrogen in steel], Alefeld, G., Felkl, I. (Eds.), V. 1, 2, Moscow: Mir, 1981.
3. Shapovalov, V. I., Trofimenko, V.V., Flokeny i kontrol vodoroda v stali [Flocks and hydrogen control in steel], Moscow: Metallurgiya, 1987.
4. Savitsky, E.M., Terekhova, V.F., Metallovedenie redkozemelnykh metallov [Metallography of rare earth metals], Moscow: Nauka, 1975.
5. Yaku shev, A.M., Kryakovsky, Yu.V., Tyurin, E.I., et al., Vliyanie redkozemelnykh elementov na flokenochuvstvitelnost konstruktsionnykh legirovannykh stalei [The influence of rare earth elements on the flocculation sensitivity of structural alloy steels], Metallurg, 1961, No 12, pp. 9–11.
6. Shulte, Yu.A., Elektrometallurgiya stalnogo litya [Electrometallurgy of steel casting], Moscow: Metallurgiya, 1970.
7. Milyuts, V.G., Malakhov, N.V., Vladimirov, N.F., Batov, Yu.M., Vliyanie alyuminiya i kaltsiya na plastichnost tolstolistovoi sudostroitelnoi stali v Z-napravlenii [The effect of aluminum and calcium on the ductility of thick-sheet shipbuilding steel in the Z-direction], Metallurg, 2011, No 2, pp. 58–60.
8. Milyuts, V. G., Tsukanov, V.V., Malykhina, O.Yu., Nasonovskaya, A.B., Vladimirov, A.G., Golubtsov, V.A., Levagin, E.Yu., Vliyanie kompleksnogo modifitsirovaniya vysokoprochnoisudostroitelnoistali na sostav i morfologiyu nemetallicheskikh vklyucheny [The effect of complex modification of high-strength shipbuilding steel on the composition and morphology of nonmetallic inclusions], Voprosy Materialovedeniya, 2013, No 4 (76), pp. 5–14.
9. Milyuts, V.G., Vladimirov, N.F., Batov, Yu.M., Razvitie tekhnologii proizvodstva slitkov vysokoprochnoi korpusnoi stali dlya izgotovleniya tolstykh listov. Ch. 1 [The development of technology for the production of high-strength body steel ingots for the manufacture of thick sheets. Part 1], Elektrometallurgiya, 2014, No 9, pp. 16–22.
10. Milyuts, V.G., Tsukanov, V.V., Petrov, S.N., Efimov, S.V., Povyshenie chistoty korpusnoi stali, obrabotannoi kompleksnymi modifikatorami [Improving the purity of body steel treated with complex modifiers], Voprosy Materialovedeniya, 2016, No 3 (87), pp. 14–22.
11. Shub, L.G., Usmanov, R.G., Makarov, V.V., Lyamin, O.P. Vliyanie sostava metalloshikhty na kachestvo stali 25L [The effect of the metal charge composition on the quality of 25L steel], Liteinoe proizvodstvo, 2004, No 6, pp. 6–7.
12. Shub, L.G., Makarov, V.V., Lyamin, O.P., Usmanov, R.G., Povedenie azota v kisloi induktsionnoi plavke [Behavior of nitrogen in acid induction melting], Metallurgiya mashinostroeniya, 2003, No 5, pp. 5–6.
Review
For citations:
Milyuts B.G., Tsukanov V.V. Influence of complex modification on gas content in shipbuilding steel. Voprosy Materialovedeniya. 2025;(1(121)):15-23. (In Russ.) https://doi.org/10.22349/1994-6716-2025-121-1-15-23
Views:
91
Email this article 