|Generate QR code
Open Access
Subscription Access
Development and research of a new hybrid antifriction polymer composite material with dielectric properties
https://doi.org/10.22349/1994-6716-2025-121-1-90-99
Abstract
The work is devoted to the study of physical and mechanical properties and tribotechnical characteristics of new hybrid antifriction polymer composite materials (PCM). The influence of hybrid fabric composition on physical-mechanical properties and tribotechnical characteristics of hybrid PCMs has been investigated. It is shown that new hybrid antifriction materials are not inferior to antifriction carbon plastics and surpass them by some characteristics.
About the Authors
A. V. Anisimov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc. (Eng),
49 Shpalernaya St, 191015 St Petersburg
I. V. Lishevich
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng),
49 Shpalernaya St, 191015 St Petersburg
A. S. Sargsyan
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng),
49 Shpalernaya St, 191015 St Petersburg
I. V. Lobyntseva
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
I. V. Blyshko
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
M. Yu. Sobolev
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
D. D. Dvoryantsev
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
E. A. Sharko
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. Bakhareva, V.E., Sovremennye mashinostroitelnye materialy. Nemetallicheskie materialy [Modern engineering materials. Non-metallic materials]: reference book, Gorynin, I.V. (Ed.), St Petersburg: Professional, 2014, pp. 79–133.
2. Bondaletova, L.I., Polimernye kompozitsionnye materialy [Polymer composite materials]: study guide, Tomsk: Izd-vo TPU, 2013.
3. Chursova, L.V., Panina, N.N., Grebeneva, T.A., Kutergina, I.Yu., Epoksidnye smoly, otverditeli, modifikatory i svyazuyushchie na ikh osnove [Epoxy resins, hardeners, modifiers and binders based on them], St Petersburg: Professiya, 2020.
4. Kryzhanovsky, V.K., Kerber, M.L., Burlov, V.V., Proizvodstvo izdely iz polimernykh materialov [Production of products from polymeric materials], St Petersburg: Professiya, 2004.
5. Tochilnikov, D.G., Ginzburg, B.M., Metodika ekspressnykh tribotekhnicheskikh ispytany antifriktsionnykh polimerov [The methodology of express tribotechnical tests of antifriction polymers], Voprosy Materialovedeniya, 2002, No 3 (31), pp. 39–48.
6. Mikhailin, Yu.A., Sverkhvysokomolekulyarny polietilen [Ultra-high molecular weight polyethylene], Polimernye materialy, izdeliya, oborudovanie, tekhnologii, 2003, No 3 (46), 4 (47), 6 (49), 7 (50), 11 (54).
7. Mikhailin, Yu.A., Konstruktsionnye polimernye kompozitsionnye materialy [Structural polymer composite materials], St Petersburg: Nauchnye osnovy i tekhnologii, 2008.
8. Mashkov, Yu.K., Tribologiya konstruktsionnykh materialov [Tribology of structural materials]: study guide, Omsk: OmGTU, 1996.
9. Mikhailin, Yu.A., Termoustoichivye polimery i polimernye materialy [Heat-resistant polymers and polymeric materials], St Petersburg: Professiya, 2006.
10. Gofman, I.V., Yudin, V.E., Orell, O., Vuorinen, J., Grigoriev, A.Ya., Kovaleva, I.N., Svetlichny, V.M., Vliyanie stepeni uporyadochennosti nadmolekulyarnoi struktury teplostoikikh termoplastov konstruktsionnogo naznacheniya na ikh mekhanicheskie i tribologicheskie kharakteristiki v diapazone temperatur 20–250°С [The influence of the degree of ordering of the supramolecular structure of heat-resistant thermoplastics for structural purposes on their mechanical and tribological characteristics in the temperature range of 20–250°C], Voprosy Materialovedeniya, 2012, No 4 (72), pp. 150–159.
11. Myshkin, N.K., Petrokopets, M.I., Tribologiya. Printsipy i prilozheniya [Tribology. Principles and applications], Gomel: IMMS NANB, 2002.
12. Sovremennye naukoemkie tekhnologii [Modern high-tech technologies]. URL: https://top-technologies. ru/ru (date of reference: 24.09.2022) 13. Tkachenko, E.V., Razrabotka armirovannykh kompozitov na osnove poliamida 6 i fenilona S-1 [Development of reinforced composites based on polyamide 6 and phenylene C-1]: Thesis for the degree of Candidate of Sciences (Eng), Sevastopol, 2018.
13. Morokov, A.A., Smirnov, G.P., Tsybizova, N.S., Tekhnologiya pryadeniya, tkachestva i netkanykh materialov [Technology of spinning, weaving and nonwovens]: study guide, St Petersburg: SPGUTD, 2013.
14. Materialy dlya sudostroeniya i morskoi tekhniki [Materials for shipbuilding and marine engineering]: reference book, Gorynin, I.V. (Ed.), St Petersburg: Professional, 2009, V. 2, pp. 381–433.
15. Val ue va, M.I., Kolobkov, A.S., Malakhovsky, S.S., Sverkhvysokomolekulyarny polietilen: rynok, svoistva, napravleniya primeneniya [Ultrahigh molecular weight polyethylene: market, properties, applications]: review, Trudy VIAM: Promyshlennye biotekhnologii, 2020, pp. 49–54.
16. Anisimov, A.V., Barakhtin, B.K., Bakhareva, V.E., Petrov, S.N., Rybin, V.V., Issledovanie mikrostruktury i mekhanizma iznashivaniya poverkhnostei par treniya ugleplastiki – medsoderzhashchie splavy [Investigation of the microstructure and mechanism of wear of surfaces of friction pairs of carbon fiber – copper-containing alloys], Voprosy Materialovedeniya, 2006, No 2 (46), pp. 44–51.
17. Lysenkov, M.P., Sposobnost nekotorykh nemetallicheskikh materialov formirovat binarnuyu poverkhnost treniya [The ability of some non-metallic materials to form a binary friction surface], Voprosy Materialovedeniya, 2006, No 2 (46), pp. 136–139.
18. Tochilnikov, D.G., Ginzburg, B.M., Metodika ekspressnykh tribotekhnicheskikh ispytany antifriktsionnykh polimerov [Methods of rapid tribotechnical testing of antifriction polymers], Voprosy Materialovedeniya, 2002, No 3 (31), pp. 39–48.
19. Bakhareva, V.E., Nikolaev, G.I., Anisimov, A.V., Antifriktsionnye nemetallicheskie materialy dlya uzlov treniya skolzheniya [Antifriction non-metallic materials for sliding friction units], Voprosy Materialovedeniya, 2011, No 1 (65), pp. 75–88.
Review
For citations:
Anisimov A.V., Lishevich I.V., Sargsyan A.S., Lobyntseva I.V., Blyshko I.V., Sobolev M.Yu., Dvoryantsev D.D., Sharko E.A. Development and research of a new hybrid antifriction polymer composite material with dielectric properties. Voprosy Materialovedeniya. 2025;(1(121)):90-99. (In Russ.) https://doi.org/10.22349/1994-6716-2025-121-1-90-99
Views:
25
Email this article 