|Generate QR code
Open Access
Subscription Access
Investigation of the mechanical properties of polymer matrices based on adhesive binders
https://doi.org/10.22349/1994-6716-2018-96-4-160-169
Abstract
The paper considers methods for manufacturing polymer-matrix samples for the determination of mechanical properties outlining the basic approach to the development of modes for pouring and curing of polymer blocks. Samples were made of cured adhesive binders VSK-50, VSK-14-2m, VSK-14-2mR, VSK-14-2mRm, and tests were carried out to determine the following characteristics: tensile and flexural strength, elongation, tensile modulus when stretching and bending.
Keywords
thermosetting binders,
adhesive binders,
mechanical properties of polymer matrices,
strength,
tensile modulus,
elongation,
adhesive prepregs,
PCM
Supporting agencies: The work was carried out under a realization of complex scientific direction 13.2 «Constructional PCM». («Strategic development of materials and technologies of their recycling until 2030»)
About the Authors
D. A. Melnikov
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
17 Radio St, 105005 Moscow
Russian Federation
17 Radio St, 105005 Moscow
A. P. Petrova
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
Russian Federation
Dr Sc. (Eng)
17 Radio St, 105005 Moscow
L. A. Dementieva
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
17 Radio St, 105005 Moscow
Russian Federation
17 Radio St, 105005 Moscow
A. V. Ilichev
Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials” (FSUE VIAM)
Russian Federation
17 Radio St, 105005 Moscow
Russian Federation
17 Radio St, 105005 Moscow
References
1. Kablov, E.N., Chursova, L.V., Lukina N.F., Kutsevich K.E., Rubtsova E.V., Petrova A.P., A study of epoxide-polysulfone polymer systems for high-strength adhesives of aviation purpose, Polymer Science. Series D, 2017, V.10, No. 3, pp. 225–229.
2. Kablov, E.N., Chursova, L.V., Babin, A.N., Mukhametov, R.R., Panina, N.N., Razrabotki FGUP VIAM v oblasti rasplavnykh svyazuyushchikh dlya polimernykh kompozitsionnykh materialov[Development by FSUE VIAM of melt bindings for polymeric composite materials], Polimernye Materialy i Tekhnologii, 2016, V. 2, No 2, pp. 37–42.
3. Kablov, E.N., Aviatsionnoe materialovedenie v XXI veke. Perspektivy i zadachi [Aviation material science in XXI century. Perspectives and tasks], Aviatsionnye Materialy. Izbrannye Trudy VIAM 1932– 2002, Moscow: MISIS VIAM, 2002, pp. 12–47.
4. Petrova, A.P., Dementeva, L.A., Lukina, N.F., Chursova, L.V., Kleevye svyazuyushchie dlya polimernykh kompozitsionnykh materialov na ugle- i steklonapolnitelyakh [Adhesive bindings for polymeric composite materials based on coal- and glass-fillers], Trudy VIAM, 2015, No 9, Art. 11, URL: http//www.viam-works.ru(accessed July 19, 2018), DOI: 10.18577/2307-6046-2015-0-9-11-11.
5. Petrova, A.P., Malysheva, G.V., Klei, kleevye svyazuyushchie i kleevye prepregi[Glues, adhesive bindings and adhesive pre-pregs], Kablov, E.N., (Ed.), Moscow: VIAM, 2017, p. 472.
6. Dementieva, L.A., Serezhenkov, A.A., Lukina, N.F., Kutsevich, K.E., Svoistva i naznachenie kompozitsionnykh materialov na osnove kleevykh prepregov [Properties and purpose of composite materials based on adhesive pre-pregs], Trudy VIAM, 2014, No 9, Art. 06, URL: http//www.viam-works.ru (accessed July 19, 2018), DOI: 10.18577/2307-6046-2014-0-8-6-6.
7. Melnikov, D.A., Gromova, A.A., Raskutin, A.E., Kurnosov, A.O., Teoreticheskii raschet i eksperimentalnoe opredelenie modulya uprugosti i prochnosti stekloplastika VPS-53/120 [Theoretical calculating and experimental determination of elasticity and strength module of VPS-53/120 fiberglass], Trudy VIAM, 2017, No 1, Art. 08, URL: http//www.viam-works.ru (reference date 19/07/2018), DOI: 10.18577/2307-6046-2017-0-1-8-8.
8. Petrova, A.P., Lukina, N.F., Melnikov, D.A., Besednov, K.L., Pavlyuk, B.F., Issledovanie svoistv otverzhdennykh kleevykh svyazuyushchikh [Study of hardened adhesive bindings properties], Trudy VIAM, 2017, No 10, Art. 6, URL: http//www.viam-works.ru (accessed July 19, 2018), DOI: 10.18577/2307-6046-2017-0-10-6-6.
9. Kablov, E.N., Innovatsionnye razrabotki VIAM po realizatsii Strategicheskikh napravlenii razvitiya materialov i tekhnologii ikh pererabotki na period do 2030 goda [Innovate developments of the AllRussian Scientific Research Institute of Aviation Materials within the project “Strategic development of materials and technologies of their recycling until 2030”], Aviatsionnye Materialy i Tekhnologii, 2015, No 1 (34), pp. 3–33, DOI:10.18577/2071-9140-2015-0-1-3-33.
10. Khaskov, M. A., Rashirenie diagrammy temperatura-vremya-prevrashchenie s uchetom teplofizicheskikh svoistv komponentov dlya optimizatsii rezhimov otverzhdeniya polimernykh kompozitsionnykh materialov [Temperature-time-transformation diagram considering thermophysical properties of components for optimization of modes of hardening of polymeric composite materials], Zhurnal Prikladnoi Khimii, 2016, No 4, pp. 510–518.
11. Dmitriev, O.S., Kirillov, V.N., Zuev, A.V., Cherepakhina, A.A., Vliyanie tipa napolnitelya na optimalnye rezhimy otverzhdeniya tolstostennykh PKM [Influence of filler type on optimal modes of hardening for thick-walled PKM], Klei. Germetiki. Tekhnologii, 2011, No 11, pp. 27–36.
12. Kasatonov, I.S., Metod i avtomatizirovannaya sistema kontrolya protsessa otverzhdeniya polimernykh kompozitov po dielekricheskim kharakteristikam [Method and automatized system of polymeric composites hardening process control by dielectric characteristics], Abstract of dissertation for competition of Candidate of Engineering Science academic degree, Tambov State TechnicalUniversity, Tambov, 2012, p. 16.
13. Melnikov, D.A., Khaskov, M.A., Guseva, M.A., Antyufeeva, N.V., K voprosu o razrabotke rezhimov pressovaniya sloistykh PKM na osnove prepregov [To the issue of development of layered PKM pressing modes based on pre-pregs], Trudy VIAM, 2018, No 2, Art. 9, URL: http://www.viamworks.ru (accessed July 19,2018), DOI: 10.18577/2307-6046-2018-0-2-9-9.
14. Khaskov, M.A., Melnikov, D.A., Kotova, E.V., Podbor temperaturno-vremennykh rezhimov otverzhdeniya epoksidnykh svyazuyushchikh s uchetom mashtabnogo faktora [Selection of temperature-time modes of epoxy-binders curing considering scale factor], Klei. Germetiki. Tekhnologii, 2017, No 10, pp. 24–32.
15. Melnikov, D.A., Ilichev, A.V., Vavilova, M.I., Sravnenie standartov dlya provedeniya mekhanicheskikh ispytanii stekloplastikov na szhatie [Comparison of standards for carrying out mechanical tests of fiberglass compression], Trudy VIAM, 2017, No 3, Art. 6, URL: http://www.viam-works.ru, (accessed July 20, 2018), DOI 10.18577/2307-6046-2017-0-3-6-6.
Review
For citations:
Melnikov D.A., Petrova A.P., Dementieva L.A., Ilichev A.V. Investigation of the mechanical properties of polymer matrices based on adhesive binders. Voprosy Materialovedeniya. 2018;(4(96)):160-169. (In Russ.) https://doi.org/10.22349/1994-6716-2018-96-4-160-169
Views:
440
Email this article 