|Generate QR code
Open Access
Subscription Access
Composites based on polybutylene terephthalate and secondary polyethylene terephthalate
https://doi.org/10.22349/1994-6716-2025-121-1-111-118
Abstract
Composite materials based on industrial polybutylene terephthalate and secondary polyethylene terephthalate were obtained, and their basic physical and mechanical properties are investigated. It was found that these polymers combine and form a homogeneous system at certain ratios. The optimal amount of secondary polyethylene terephthalate has been determined, which can be introduced into polybutylene terephthalate while preserving its basic physical and mechanical properties.
About the Authors
T. A. Borukaev
Berbekov Kabardino-Balkar State University
Russian Federation
Russian Federation
Dr Sc. (Chem),
173 Chernyshevsky St, 360004 Nalchik, Kabardino-Balkarian Republic
L. I. Kitieva
Ingush State University
Russian Federation
Russian Federation
Cand Sc. (Chem),
7 Zyazikova Street, 386001 Magas, Republic of Ingushetia
A. Kh. Malamatov
Berbekov Kabardino-Balkar State University
Russian Federation
Russian Federation
Dr Sc. (Chem),
173 Chernyshevsky St, 360004 Nalchik, Kabardino-Balkarian Republic
References
1. Itogi konferentsii PETF 2018 [Results of the PETF 2018 conference]. URL: https://mplast.by/novosti/2018-03-06-itogi-konferentsii-petf-2018/
2. Kozlov, A., Kupite kurtku, i budet PETF [Buy a jacket, and there will be a PET], The Chemical Journal, 2017, No 9, pp. 62–65.
3. Filimonov, O.I., Osobennosti PET-tary kak vtorichnogo antropogennogo syrya i tsenoobrazovanie v sfere ee pererabotki [Features of PET packaging as a secondary anthropogenic raw material and pricing in the field of its processing]: Part 2, Sovremennye problemy nauki i obrazovaniya, 2015, No 2.
4. Bedanokov, A.Yu., Beshtoev, B.Z., Mikitaev, M.A., Mikitaev, A.K., Sazonov, B.B., Polietilentereftalat: novye napravleniya retsiklinga [Polyethylene terephthalate: new directions of processing], Plasticheskie massy, 2009, No 6, pp. 18–21.
5. Belov, D.V., Belyaev, S.N., Perspektivy pererabotki plastikovykh otkhodov na osnove polietilenglikoltereftalata s primeneniem zhivykh sistem [Prospects for processing plastic waste based on polyethylene glycol terephthalate using living systems]: review, Izvestiya vuzov. Prikladnaya khimiya i biotekhnologiya, 2022, V. 12, No 2, pp. 238–252.
6. Chuprova, L.V., Mullina, E.R., Mishurina, O.A., Ershova, O.V., Issledovanie vozmozhnosti polucheniya kompozitsionnykh materialov na osnove vtorichnykh polimerov [Investigation of the possibility of obtaining composite materials based on secondary polymers], Sovremennye problemy nauki i obrazovaniya, 2014, No 4.
7. Kormiltseva K.A., Pererabotka plastikovykh otkhodov: polietilentereftalat [Recycling of plastic waste: polyethylene terephthalate], Molodoi ucheny, 2022, No 22 (417), pp. 611–614.
8. Lavrov, N.A., Belukhichev, E.V., Teoreticheskie osnovy i mekhanizmy sovmeshcheniya polimerov [Theoretical foundations and mechanisms of polymer alignment], Plasticheskie massy, 2023, No 5–6, pp. 8–11.
9. Borukaev, T.A., Mashukova, B.S., Mashukov, N.I., Tlenkopachev, M.A., Mikitaev, A.K., Fiziko-mekhanicheskie svoistva polibutilentereftalata, modifitsirovannogo poliazometinami [Physico-mechanical properties of polybutylene terephthalate modified with polyazomethines], Plasticheskie massy, 2004, No 4, pp. 18–19.
10. Katsapova, O.V., Lapkovsky, V.V., Izuchenie fiziko-khimicheskikh svoistv voloknistykh materialov na osnove smesei polialkilentereftalatov i izotakticheskikh poliolefinov [Study of physico-chemical properties of fibrous materials based on mixtures of polyalkylene terephthalates and isotactic polyolefins], Uspekhi v khimii i khimicheskoi tekhnologii, 2008. V. 22, No 5 (85), pp. 13–15.
11. Chang, B.P., Mohanty, A.K., Misraab, M., Tuning the compatibility to achieve toughened biobased poly(lactic acid)/poly(butylene terephthalate) blends, RSC Adv., 2018, No 8, pp. 27709–27724.
12. Wu Ting, H u Hui Lian, D u Yi Ping, Jiang Dong, Discrimination of Thermoplastic Polyesters by MALDI-TOF MS and Py-GC/MS, Int. J. of Polym. Analysis and Characterization, 2014, V. 19, No 5, pp. 441–452.
13. Blythe, A.R., Bloor, D., Electrical Properties of Polymers, Cambridge University Press, 2005.
14. Kitieva, L.I., Poluchenie polibutilentereftalata [Production of polybutylene terephthalate], Innovatsionnye podkhody v reshenii problem sovremennogo obshchestva, Penza: Nauka i prosveshchenie, 2018, pp. 294–302.
15. Makarova, V.V., Avdeev, V.N., Strelets, B.Kh., Smirnova, N.M., Akulin, Yu.A., Kulichikhin, V.G., Nekotorye puti khimicheskoi i fizicheskoi modifikatsii polyetilenterefthalata [Some ways of chemical and physical modification of polyethylene terephthalate], Vysokomolek. soed. Ser. A, 2005, V. 47, No 7, pp. 1140–1152.
Review
For citations:
Borukaev T.A., Kitieva L.I., Malamatov A.Kh. Composites based on polybutylene terephthalate and secondary polyethylene terephthalate. Voprosy Materialovedeniya. 2025;(1(121)):111-118. (In Russ.) https://doi.org/10.22349/1994-6716-2025-121-1-111-118
Views:
16
Email this article 