|Generate QR code
Open Access
Subscription Access
Study of the influence of acoustic oscillations on the structure and wear resistance of deposited alloys of the Fe-Cr-Ni-Mn-Mo-Ti-Nb-C system
https://doi.org/10.22349/1994-6716-2025-121-1-173-184
Abstract
The effect of ultrasonic vibrations on the structural-phase composition and wear resistance of hypoeutectic and hypereutectic surfacing alloys of the Fe–Cr–Ni–Mn–Mo–Ti–Nb–C system was studied. Vibrations were introduced into the weld pool using a filler flux-cored wire during electric arc surfacing with a consumable electrode. Metallographic studies of the alloys, micro-X-ray spectral and X-ray structural analyses were performed. Alloy samples were tested for resistance to gas-abrasive wear, as well as wear through an abrasive layer at normal and elevated temperatures up to 600°C. It was found that acoustic treatment of the weld pool, differently affecting the structure of the alloys of the alloying system under consideration, can cause both a decrease and an increase in the wear resistance of the alloys.
Keywords
surfacing alloys,
electric arc surfacing,
ultrasonic oscillations,
wear resistance,
high-temperature gas-abrasive wear,
austenite,
carbides
Supporting agencies: The research was supported by Russian Science Foundation, grant No 24-23-20068, https://rscf.ru/project/24-23-20068/ and grant from Administration of the Volgograd region under agreement No 7 dated May 31, 2024.
About the Authors
A. A. Artemiev
Volgograd State Technical University
Russian Federation
Russian Federation
Cand Sc. (Eng),
28 Lenina Ave, Volgograd, 400005 Volgograd
I. V. Zorin
Volgograd State Technical University
Russian Federation
Russian Federation
Dr Sc. (Eng),
28 Lenina Ave, Volgograd, 400005 Volgograd
D. V. Priyatkin
Volgograd State Technical University
Russian Federation
Russian Federation
Cand Sc. (Eng),
28 Lenina Ave, Volgograd, 400005 Volgograd
V. I. Lysak
Volgograd State Technical University
Russian Federation
Russian Federation
Dr Sc. (Eng), acad. RАS,
28 Lenina Ave, Volgograd, 400005 Volgograd
References
1. Shumilov, A.A., Shtanko, P.K., Gordienko, V.N., Razrabotka naplavochnykh materialov dlya povysheniya iznosostoikosti detalei tyagodutievykh mashin teplovykh elektrostantsy [Development of surfacing materials to increase wear resistance of parts of thermal power plant draft machines], Vestnik SevNTU, 2010, No 110, pp. 216–218.
2. Yuzvenko, Yu.A., Shimanovsky, V.P., Gavrish, V.A., Pashchenko, M.A., Dugovaya naplavka detalei zasypnogo ustroistva domennoi pechi [Arc surfacing of blast furnace charging device parts], Avtomaticheskaya svarka, 1972, No 2, pp. 59–63.
3. Artemiev, A.A., Priyatkin, D.V., Lysak, V. I., Loyko, P.V., Analiz naplavochnykh splavov dlya raboty v usloviyakh gazoabrazivnogo iznashivaniya pri povyshennykh temperaturakh [Analysis of surfacing alloys for work under conditions of gas-abrasive wear at elevated temperatures], Izvestiya Volgogradskogo gosudarstvennogo tekhnicheskogo universiteta. Ser. Problemy materialovedeniya, svarki i prochnosti v mashinostroenii, 2020, No 10 (245), pp. 49–55.
4. Eroziya [Erosion], Preese C. (Ed.), new York, 1979.
5. Va rga, M., High temperature abrasive wear of metallic materials, Wear, 2017, V. 376–377, Part A, pp. 443–451. URL: https://doi.org/10.1016/j.wear.2016.12.042
6. Vei nt hal, R., Kulu, P., Käerdi, H., Microstructural aspects of abrasive wear of composite powder materials and coatings, International Journal of Materials and Product Technology, 2011, V. 40, Is. 1–2, pp. 92–119. URL: https://doi.org/10.1504/IJMPT.2011.037208
7. Kudina, A.V., Kurash, V. V., Redin, I.V., Hrolenok, V.V., Poluchenie iznosostoikikh metallopokryty elektrodugovoi naplavkoi plavyashchimsya elektrodom pri vozdeistvii na nego ultrazvukom [Obtaining wear-resistant metal coatings by electric arc surfacing with a consumable electrode under the influence of ultrasound], Agropanorama, 2013, No 3, pp. 34–38.
8. Kumar, S., Wu, C., Padhy, G., Ding, W., Application of ultrasonic vibrations in welding and metal processing: A status review, Journal of Manufacturing Processes, 2017, V. 26, pp. 295–322. URL: https://doi.org/10.1016/j.jmapro.2017.02.027
9. Parkhimovich, E.M., Svarka i naplavka v ultrazvukovom pole [Welding and surfacing in an ultrasonic field], Minsk: Nauka i texnika, 1988.
10. Tiana, Y., Shena, J., Effects of ultrasonic vibration in the CMT process on welded joints of Al Alloy, Journal of Materials Processing Technology, 2018, V. 4, pp. 282–291. URL: https://doi.org/10.1016/j.jmatprotec.2018.05.004
11. Minin, S.I., Trofimov, A.I., Trofimov, M.A., Tekhnologiya termicheskoi svarki tsirkulyatsionnykh truboprovodov AES s vozdeistviem ultrazvuka [Technology of thermal welding of NPP circulation pipelines using ultrasound], Izvestiya vuzov. Yadernaya energetika, 2016, No 4, pp. 5–9.
12. Watanabe, T., Shiroki, M., Ya na gi sawa, A., Sasaki, T., Improvement of mechanical properties of ferritic stainless steel weld metal by ultrasonic vibration, Journal of Materials Processing Technology, 2010, V. 210, Is. 12, pp. 1646–1651. URL: https://doi.org/10.1016/j.jmatprotec.2010.05.015
13. Liu, J., Zhu, H., Li, Z., Cui, W., Shi, Y., Effect of ultrasonic power on porosity, microstructure, mechanical properties of the aluminum alloy joint by ultrasonic assisted laser-MIG hybrid welding, Optics and Laser Technology, 2019, V. 119, p. 105619. URL: https://doi.org/10.1016/j.optlastec.2019.105619
14. Fan, Q., Chen, C., Fan, C., Liu, Z., Cai, X., Lin, S., Ya n g, C., Ultrasonic induces grain refinement in gas tungsten arc cladding Al-CoCrFeNi high-entropy alloy coatings, Materials Science and Engineering A, 2021, V. 821, p. 141607. URL: https://doi.org/10.1016/j.msea.2021.141607
15. Zhao, G., Wang, Z., Hu, S., Duan, S., Chen, Y., Effect of ultrasonic vibration of molten pool on microstructure and mechanical properties of Ti-6Al-4V joints prepared via CMT+P welding, Journal of Manufacturing Processes, 2020, V. 52, pp. 193–202, https://doi.org/10.1016/j.jmapro.2020.01.045
16. Krivonosova, E.A., Shchitsyn, Yu.D., Akulova, S.N., Myshkina, A.V., Neulybin, S.D., Belinin, D.S., Snizhenie defektnosti zharoprochnykh nikelevykh splavov v tekhnologiyakh naplavki [Reducing defects of heat-resistant nickel alloys in surfacing technologies], Vestnik Permskogo natsionalnogo issledovatelskogo politekhnicheskogo universiteta. Mashinostroenie, materialovedenie, 2018, V. 20, No 2, pp. 12–19.
17. Shevchenko, O.I., Trekin, G.E., Formirovanie struktury i svoistv kompozitsii naplavlenny sloy – osnovnoi metall v ultrazvukovom pole [Formation of the structure and properties of the composition “welded layer – base metal” in an ultrasonic field], Vestnik Permskogo natsionalnogo issledovatelskogo politekhnicheskogo universiteta. Mashinostroenie, materialovedenie, 2014, V. 16, No 4, pp. 124–132.
18. Thavamani, R., Balusamy, V., Nampoothiri, J., Subramanian, R., Ravi, K.R., Mitigation of hot cracking in Inconel 718 superalloy by ultra-sonic vibration during gas tungsten arc welding, Journal of Alloys and Compounds, 2018, V. 740, pp. 870–878. URL: https://doi.org/10.1016/j.jallcom.2017.12.295
19. Artemiev, A.A., Zorin, I.V., Sokolov, G.N., Lysak, V.I., Denisevich, D.S., Priyatkin, D.V., Diagnostika naplavlennykh splavov na stoikost k vysokotemperaturnomu gazoabrazivnomu iznashivaniyu, [Diagnostics of deposited alloys for resistance to high-temperature gas abrasive wear], Vestnik Permskogo natsionalnogo issledovatelskogo politekhnicheskogo universiteta. Mashinostroenie, materialovedenie, 2019, V. 21, No 1, pp. 12–19.
20. Artemiev, A.A., Antonov, A.A., Sokolov, G.N., Lysak, V.I., Metodika ispytany naplavlennykh splavov na stoikost k vysokotemperaturnomu abrazivnomu iznashivaniyu [Testing Methodology for Welded Alloys for Resistance to High-Temperature Abrasive Wear], Trenie i iznos, 2017, V. 38, No 3, pp. 247–254.
Review
For citations:
Artemiev A.A., Zorin I.V., Priyatkin D.V., Lysak V.I. Study of the influence of acoustic oscillations on the structure and wear resistance of deposited alloys of the Fe-Cr-Ni-Mn-Mo-Ti-Nb-C system. Voprosy Materialovedeniya. 2025;(1(121)):173-184. (In Russ.) https://doi.org/10.22349/1994-6716-2025-121-1-173-184
Views:
25
Email this article 