Generate QR code
Open Access
Subscription Access
Structure and properties of varying thickness rolling made of high-strength martensitic steel after hardening and tempering
https://doi.org/10.22349/1994-6716-2025-122-2-05-14
Abstract
A set of studies on the influence of tempering modes on structural changes in sheet metal products of various thicknesses of high-strength low-carbon martensitic steel has been carried out. It has been shown that the formation of a carbide phase in lath martensite and self-tempered martensite has a decisive influence on the level of impact work of steel with a martensitic structure.
About the Authors
G. D. Motovilina
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
S. V. Korotovskaya
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
E. I. Khlusova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
M. V. Golubeva
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
E. V. Zabavicheva
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. Gorynin, I.V., Rybin, V.V., Malyshevsky, V.A., Semicheva, T.G., Sherokhina, L.G., Prevrashcheniya dislokatsionnogo martensita pri otpuske vtorichnotverdeyushchei stali [Transformations of dislocation martensite during tempering of secondary-hardening steel], MiTOM, 1999, No 9, pp. 13–32.
2. Kroshkin, A.A., Malyshevsky, V.A., Rybin, V.V., Sherokhina, L.G., Issledovanie tonkoi struktury vysokoprochnoi nizkouglerodistoi vtorichno-tverdeyushchei stali [Study of fine structure of highstrength low-carbon secondary-hardening steel], Voprosy sudostroeniya, Ser.: Metallovedenie. Metallurgiya, 1983, Is. 37, pp. 3–10.
3. Rybin , V.V., Belozersky, G.N., Malyshevsky, V.A., et al., Vliyanie dislokatsy na mekhanizm vtorichnogo tverdeniya [Influence of dislocations on the secondary solidification mechanism], FMM, 1982, V. 54, Is. 5, pp. 990–999.
4. Gorynin, I.V., Rybin, V.V., Malyshevsky, V.A., Semicheva, T.G., Teoreticheskie i eksperimentalnye osnovy sozdaniya vtorichnotverdeyushchikh svarivaemykh konstruktsionnykh stalei [Theoretical and experimental bases for creation of secondary-hardening weldable structural steels], MiTOM, 1999, No 9, pp. 7–13.
5. Rybin , V.V., M alyshevsky, V.A., Semicheva, T.G., Razvitie teorii vtorichnogo tverdeniya pri sozdanii vysokoprochnykh korpusnykh marok stali [Development of the theory of secondary solidification in the creation of high-strength hull grades of steel], Voprosy Materialovedeniya, 2005, No 2 (42), pp. 55–68.
6. Novikov, I.I., Teoriya termicheskoi obrabotki [Theory of heat treatment], Moscow: Metallurgiya, 1978.
7. Yakovleva, I.L., Tereshchenko, N.A., Urtsev, N.V., Nablyudenie martensitno-austenitnoi sostavlyayushchei v strukture nizkouglerodistoi nizkolegirovannoi trubnoi stali [Observation of martensitic-austenitic component in the structure of low-carbon low-alloy pipe steel], FMM, 2020, V. 121, No 4, pp. 396–402.
8. Fizicheskoe materialovedenie. V. 1: Fizika tverdogo tela [Physical Materials Science. V. 1: Solid State Physics], Moscow: NIYaU MIFI, 2012.
Review
For citations:
Motovilina G.D., Korotovskaya S.V., Khlusova E.I., Golubeva M.V., Zabavicheva E.V. Structure and properties of varying thickness rolling made of high-strength martensitic steel after hardening and tempering. Voprosy Materialovedeniya. 2025;(2(122)):5-14. (In Russ.) https://doi.org/10.22349/1994-6716-2025-122-2-05-14
Views:
6
Email this article 