Generate QR code
Open Access
Subscription Access
Effect of silicon dioxide obtained by gas-phase and precipitation methods on the properties of unsaturated polyester resin
https://doi.org/10.22349/1994-6716-2025-123-3-156-163
Abstract
The strength properties of unsaturated polyester resin grade PN-609-21M were studied depend-ing on the concentration of two types of silicon dioxide, as well as their influence on the technological prop-erties of the resin.
About the Authors
E. A. Artamonov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand. Sc (Eng)
49 Shpalernaya St, 191015 St Petersburg
K. N. Ryabukha
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
L. A. Smyslova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. National standard GOST 27952–88: Smoly poliefirnye nenasyshchennye. Tekhnicheskie usloviya [Polyester unsaturated resins. Technical specifications], Moscow: Izd-vo standartov, 1989.
2. Merk ulov, D.A., Kompozitsionnye stroitelnye materialy na osnove poliefirnoi smoly PN-609–21M [Composite building materials based on polyester resin PN-609-21M]: thesis for the degree of Candidate of … Sciences (Eng), Saransk: Ogarev State University of Mordovia, 2017, pp. 7–9, 13.
3. Kut ishcheva , E.S., Usoltseva , I.O., Pereder i n, Yu.V. Sposoby polucheniya vysokodispersno-go dioksida kremniya [Methods for producing highly dispersed silicon dioxide], Polzunovsky vestnik, 2021,No 2, pp. 188‒193.
4. National standard GOST 14922–77: Aerosil. Tekhnicheskie usloviya [Aerosil. Technical specifica-tions], corrected: No 2 (1986), 3 (1987) and 4 (1990).
5. Ti moshch i k , O.A., Shchelokova , E.A., K asi kov, A.G., Vliyanie usloviy polucheniya amorf-nogo kremnezema zol-gel metodom na ego svoistva [Influence of the conditions for obtaining amorphous sil-ica by the sol-gel method on its properties], Khimiya i materialovedenie, 2019, No 3, pp. 368–374.
6. TU 2168-002-14344269–09: Kovelos (dioksid kremniya osazhdenny). Tekhnicheskie usloviya [Ko-velos (precipitated silicon dioxide). Technical specifications].
7. National standard GOST 25271–93: Plastmassy. Smoly zhidkie, emulsii ili dispersii. Opredelenie ka-zhushcheisya vyazkosti po Brukfildu [Plastics. Resins, liquid, emulsions and dispersions. Determination of apparent viscosity according to Brookfield].
8. Vasyalina, A.A., Ozhiganov, V.V., Bakunin, D.O., Ilyin, A.A., Uluchshenie dispergirue-mosti vodnodispersionnoi gruntovki [Improving the dispersibility of water-based primer], Ot khimii k tekh-nologii shag za shagom, 2022, V. 3, No 4, pp. 15–18.
9. OST 5.9616–85: Stekloplastiki poliefirnye dlya sudostroeniya. Tipovye tekhnologicheskie protsessy formovaniya [Polyethylene fiberglass for shipbuilding. Typical molding processes].
10. National standard GOST 4651–2014: Plastmassy. Metody ispytaniya na szhatie [Plastics. Compres-sion testing methods].
11. Starokadomsky, D . L . , Vliyanie usileniya termokhimstoikosti epoksikompozitov, a takzhe adgezii k stali i drugikh prochnostnykh svoistv v zavisimosti ot udelnoi poverkhnosti nanokremnezemov v ryadu 60–450 m2/g pri 1 mas.% napolneniya [The effect of increasing the thermochemical resistance of epoxy composites, as well as adhesion to steel and other strength properties, depending on the specific surface area of nanosilica in the range of 60–450 m2/g at 1 wt.% of filling], Plasticheskie massy, 2018, No 11–12, pp. 53–55.
12. Starokadomsk y, D.L., Vliyanie aerosilov razlichnoi udelnoi poverkhnosti na khimicheskuyu stoikost epoksipolimera v kontsentrirovannoi azotnoi kislote [Effect of aerosils with different specific sur-face areas on the chemical resistance of epoxide polymer in concentrated nitric acid], Plasticheskie massy,2010, No 6, pp. 27–33.
13. Mokina , E.S., Shein, A.B., Issledovanie vliyaniya udelnoi poverkhnosti tekhnicheskogo uglero-da na tekhnologicheskie i fiziko-mekhanicheskie svoistva rezin [Study of the effect of the specific surface ar-ea of technical carbon on the technological and physical-mechanical properties of rubber], Vestnik Permsko-go universiteta, 2013, Is. 3, No 11, pp. 75–80.
Review
For citations:
Artamonov E.A., Ryabukha K.N., Smyslova L.A. Effect of silicon dioxide obtained by gas-phase and precipitation methods on the properties of unsaturated polyester resin. Voprosy Materialovedeniya. 2025;(3(123)):156-163. (In Russ.) https://doi.org/10.22349/1994-6716-2025-123-3-156-163
Views:
43
Email this article 