Generate QR code
Open Access
Subscription Access
A method of determination of mechanical properties and true stress-strain curve for fuel cladding material by ring specimens testing. Part 2. Numerical and experimental verification
https://doi.org/10.22349/1994-6716-2025-123-3-210-226
Abstract
The numerical and experimental verification is performed of the proposed method for determination of standard mechanical properties and the true stress-strain curve for fuel cladding material by ring specimens testing and FEM modeling of their loading (see Part 1 of the article). The tests results of the proposed ring specimens are represented for EP823 steel (12Cr-Mo-W-Si-V-Nb-B) in the initial and irradiated states over a wide temperature range when using various lubricants and without lubrication. Based on the obtained results of these tests, the mechanical properties and true stress-strain curves are determined for EP823 steel.
About the Authors
V. N. Fomenko
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Cand Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
B. Z. Margolin
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
Dr Sc. (Eng)
49 Shpalernaya St, 191015 St Petersburg
F. L. Shishkov
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Russian Federation
49 Shpalernaya St, 191015 St Petersburg
References
1. Enokhovich, A.S., Spravochnik po fizike [Physics’ handbook], Moscow: Prosveshchenie, 1978, p. 85.
2. Margolin, B.Z., Gulenko, A.G., Fomenko, V.N., Kostylev, V.I., Dalneishee razvitie modeli Pro metey i metoda Unified Curve. Ch. 2. Razvitie metoda Unified Curve [Development of the Prometey model and method of unified curve. Part 2. Unified curve], Voprosy materialovedeniya, 2016, No 4 (88), pp. 151–178.
Review
For citations:
Fomenko V.N., Margolin B.Z., Shishkov F.L. A method of determination of mechanical properties and true stress-strain curve for fuel cladding material by ring specimens testing. Part 2. Numerical and experimental verification. Voprosy Materialovedeniya. 2025;(3(123)):210-226. (In Russ.) https://doi.org/10.22349/1994-6716-2025-123-3-210-226
Views:
28
Email this article 