Generate QR code
Open Access
Subscription Access
Catalytically active coatings for steam reforming systems: synthesis and catalytic properties
https://doi.org/10.22349/1994-6716-2018-94-2-96-105
Abstract
The paper considers science and engineering aspects of catalytically active compositions creation as regards immobilized catalysts for reforming hydrocarbon raw materials into hydrogen fuel. The authors investigate synthesis of catalytic powder mixtures and manufacturing of functional coatings by supersonic cold gas dynamic spraying. Research results in the field of creation of catalysts for steam conversion of methane to hydrogenous fuel on the metal support (Cr15Al15 tape support) are given. Composite powder mixtures (Ni–Al–Al(OH)3 – Ca(OH)2–Mg(OH)2) were used as starting materials.
Keywords
steam methane reforming,
immobilized catalysts,
catalytically active powder mixtures,
functional coating,
surface morphology,
tape support,
promoting agent
Supporting agencies: Experimental studies were carried out on the equipment of the Center for Collective Use “Composition, Structure and Properties of Structural and Functional Materials” of NRC “Kurchatov Institute” – CRISM “Prometey” and financially supported by the Ministry of Education and Science of the Russian Federation within the framework of the agreement No. 14.595.21.000, the unique identifier RFMEFI59517X0004.
About the Authors
M. L. Shishkova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49, Shpalernaya St, 191015, St Petersburg
Russian Federation
49, Shpalernaya St, 191015, St Petersburg
N. V. Yakovleva
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
49, Shpalernaya St, 191015, St Petersburg
Russian Federation
49, Shpalernaya St, 191015, St Petersburg
References
1. Tarasov, B. P., Lototsky, M. V., Vodorodnaya energetika: proshloe, nastoyaschee, vidy na buduschee [Hydrogen energy: the past, the present, the future perspectives], Rossiisky khimichesky zhurnal, 2006, V. 50, No 6, pp. 5–18.
2. Kuranov, A. L., Korabelnikov, A. V., Mikhailov, A. M., Printsipy upravleniya i modelirovaniya teplovoy zashchity giperzvukovogo letatelnogo apparata [Principles of control and simulation of thermal protection of hypersonic aircraft], 2014, St Petersburg: Politechnic University Publishers, 2014.
3. Boreskov, G. K., Periodichesky zakon i kataliticheskie svoystva elementov [Periodic law and catalytic properties of elements], Sto let Periodicheskogo zakona khimicheskikh elementov, Moscow: Nauka, 1971, pp. 231–241.
4. Ashmor, P., Kataliz i ingibirovanie khimicheskikh reaktsiy [Catalysis and inhibition of chemical reactions], Moscow: Mir, 1966.
5. Khauffe, K., Reaktsii v tverdykh telakh i na ikh poverkhnosti [Reactions in solids and on their surface], Moscow: Inostrannaya literatura, 1963.
6. Sabirova, Z. A., Danilova, M. M., Zaykovsky, V. I., Nikelevye katalizatory na osnove poristogo nikelya dlya reaktsii parovoy konversii metana [Nickel catalysts based on porous nickel for the reaction of methane vapor conversion], Kinetika i kataliz, 2008, V. 49, No. 3, pp.449–456.
7. Vlasov, Ye. A., Prokopenko, A. N., Poluchenie vodoroda iz uglevodorodnogo syriya na nikelsoderzhashchikh katalizatorakh [Production of hydrogen from hydrocarbonfeed stock on nickel-containing catalysts], Vestnik INZHEKONa, Serie Tekhnicheskie nauki, 2005, Issue 3(8), pp. 7–13.
8. Beurden, P., van, On the catalytic aspects of steam methane reforming, 2004, p. 27.
9. Wu, H., La Parola, V., Pantaleo, G., Puleo, F., Venezia, A. M., Liotta, L. F., Ni-Based Catalysts for Low Temperature Methane Steam Reforming: Recent Results on Ni-Au and Comparison with Other Bi-Metallic Systems, Catalysts, 2013, No 3, pp. 563–583.
10. Liu, J. A., Kinetics, catalysis and mechanism of methane steam reforming: Master Thesis of Science in Chemical Engineering, Worcester Polytechnic Institute, Worcester, 2006.
11. Lu, Z., Guo, Y., Zhang, Q., Yagi, M., Hatakeyama, J., Li, H., Chen, J., Sakurai, M., Kameyama, H., A novel catalyst with plate-type anodic alumina supports, Ni/NiAl2O4/г Al2O3/alloy, for steam reforming of methane, Applied Catalysis A: General, 2008, V. 347, Issue 2, pp. 200–207.
12. Choi, J. S., Moon, K. I., Kim, Y. G., Lee, J. S., Kim, C. H., Trimm, D. L., Stable carbon dioxide reforming of methane over modified Ni/Al2O3 catalysts, Catalysis Letters, (1998), V. 52, pp. 43–47.
13. Pakhomov, N. A., Nauchnye osnovy prigotovleniya katalizatorov [Scientific foundations for the preparation of catalysts], Novosibirsk: NSU, 2010.
14. Lemonidou, A. A., Vasalos, I. A., Carbon dioxide reforming of methane over 5 wt.% Ni/CaO–Al2O3 catalyst, Applied Catalysis A: General, 2002, V. 228, Issue 1–2, pp. 227–235.
15. Asencios, J. O., Bellido, J. D., Assaf, E. M., Synthesis of NiO-MgO-ZrO2 catalysts and their performance in reforming of model biogas, Applied Catalysis A: General, 2011, V. 397, Issue 1–2, pp. 138–144.
16. Nurunnabi, K., Fujimoto, K. Suzuki, B. Li, S. Kado K. et al., Promoting effect of noble metals addition on activity and resistance to carbon deposition in oxidative steam reforming of methane over NiO–MgO solid solution, Catalysis Communications, 2006, V. 7, Issue 2, pp.73–78.
17. Gorynin, I. V., Farmakovsky, B. V., Gerashchenkov, D. A., Vasiliev, A. F., Method for making nanostructured functional-gradient wear-resistant coating, Patent of Russian Federation RU 2 354 749 C2, Publ. 10.05.2009, Bull. 13.
18. Gerashchenkov, D. A., Vasiliev, A. F., Farmakovsky, B. V., Mashek, A. Ch., Issledovanie temperatury potoka v protsesse kholodnogo gazodinamicheskogo napyleniya funktsionalnykh pokrytiy [Investigation of the flow temperature in the process of cold gas-dynamic spraying of functional coatings], Voprosy Materialovedeniya, 2014, No 1(77), pp. 87–89.
19. Vinogradova, T. S., Razrabotka vysokoeffektivnykh poristykh nositeley na metallicheskoy osnove [Development of highly efficient porous supports on a metal basis], Proceedings of 2nd simpozium Termokhimicheskie protsessy v plazmennoy aerodinamike, St Petersburg, September 10–12, 2001.
20. Vinogradova, T. S., Tarakanova, T. A., Farmakovsky, B. V., Ulin, I. V., Sholkin, S. E., Yurkov, M. A., Method of making catalytic composite coating, Patent of Russian Federation RU 2 417 841 C1, Publ. 10.05.2011, Bull. 13.
21. Yakovleva, N. V., Markov, A. M., Povyshev, A. M., Shishkova, M. L., Issledovanie fazovykh prevrashcheniy pri sinteze kataliticheskikh pokrytiy na metallicheskom nositele [Investigation of phase transformations in the synthesis of catalytic coatings on a metal carrier], Zhurnal prikladnoy khimii, 2018, V. 91, Issue 1, pp.148–156.
22. Gerashchenkov, D. A., Vasiliev, A. F., Farmakovsky, B. V., Mashek, A. Ch., Issledovanie temperatury potoka v protsesse kholodnogo gazodinamicheskogo napyleniya funktsionalnykh pokrytiy [Investigation of the flow temperature in the process of cold gas-dynamic spraying of functional coatings], Voprosy Materialovedeniya, 2014, No 1(77), pp.87–89.
23. Diagrammy sostoyaniya dvoynykh metallicheskikh sistem [Diagrams of the state of double metal systems]: a reference book, N. P. Liakishev (Ed.), Moscow: Mashinostroenie, 1996, V. 1.
24. Jung, S. B., Minamino, Y., Yamane, T., Saji, S., Reaction diffusion and formation of Al3Ni and Al3Ni2 phases in the Al-Ni system, Journal of materials science letters, 1993, V. 12, pp. 1684–1686.
Review
For citations:
Shishkova M.L., Yakovleva N.V. Catalytically active coatings for steam reforming systems: synthesis and catalytic properties. Voprosy Materialovedeniya. 2018;(2(94)):96-105. (In Russ.) https://doi.org/10.22349/1994-6716-2018-94-2-96-105
Views:
294
Email this article 