Generate QR code
Open Access
Subscription Access
On the influence of hot-bending deformation on the structure and properties of 10KhN4MFA steel bulb profile for shipbuilding
https://doi.org/10.22349/1994-6716-2018-95-3-09-13
Abstract
In the process of bending of 10KhN4MFA steel flat-bulb profile, grain boundaries break down, brittle fracture of specimens takes place, and steel toughness decreases at a degree of deformation of more than 3% and heating by high-frequency currents of the deformation zone to the hardening temperature (960°C). There is no brittle fracture of the profile in the entire range of the degree of deformation when the heating temperature of the deformation zone raises to 1050°C.
About the Authors
M. A. Budnichenko
JSC PO SEVMASH
Russian Federation
Russian Federation
Cand. Sc. (Eng)
58 Arkhangelskoe chausse, 164500 Severodvinsk, Arkhangelsk Region
V. A. Kononov
JSC PO SEVMASH
Russian Federation
Russian Federation
Cand. Sc. (Eng)
58 Arkhangelskoe chausse, 164500 Severodvinsk, Arkhangelsk Region
References
1. Tsirulnikov, A.N., Ustanovka s induktsionnym nagrevom dlya gibki profilnogo prokata [Installation with induction heating for bending profile rolling], Tekhnologiya sudostroeniya, 1965, No. 4, pp. 15–19.
2. Zuev, M.I., Kultygin, V.S., Vinograd, M.I. et al. Plastichnost stali pri vysokikh temperaturakh [Plasticity of steel at high temperatures], Moscow: Metallurgizdat, 1954.
3. Rybin, V.V., Malyshevsky, V.A., Khlusova, E.I., Vysokoprochnye svarivaemye uluchshaemye stali [High-strength welded improved steels], StPetersburg: Publishing house of Polytechnic University, 2016.
4. Gorynin, I. V., Rybin, V. V., Malyshevskii, V. A., Semicheva, T. G., Theoretical and experimental foundations of the creation of secondary-hardening weldable structural steels, Metal Science and Heat Treatment, 1999, V. 41, Is. 9, September, pp. 371–376.
5. Kovalchuk, M.V., Oryshchenko, A.S., Malyshevsky, V.A., Petrov, S.N., Shumilov, E.A., Problemy sozdaniya tekhnologichnykh ekonomnolegirovannykh vysokoprochnykh staley dlia arkticheskikh konstruktsiy [Problems of creation of technological economically alloyed high-strength steels for arctic constructions], Voprosy Materialovedeniya, 2017, No. 2 (90), pp. 7–14.
6. Zisman, A.A., Petrov, S.N., Ptashnik, A.V., Kolichestvennaya attestatsiya beynitnomartensitnykh struktur vysokoprochnykh staley metodami skaniruyushchey elektronnoy mikroskopii [Quantitative attestation of bainitic-martensitic structures of high-strength steels by scanning electron microscopy methods], Metallurg, 2014, No. 11, pp. 91–95.
Review
For citations:
Budnichenko M.A., Kononov V.A. On the influence of hot-bending deformation on the structure and properties of 10KhN4MFA steel bulb profile for shipbuilding. Voprosy Materialovedeniya. 2018;(3(95)):9-13. (In Russ.) https://doi.org/10.22349/1994-6716-2018-95-3-09-13
Views:
250
Email this article 