Generate QR code
Open Access
Subscription Access
Dynamic properties of elastomer composites filled with multiwalled carbon nanotubes
https://doi.org/10.22349/1994-6716-2018-95-3-137-145
Abstract
The paper studies the influence of multiwalled carbon nanotubes (MWCN) on vulcanizing and dynamic properties under shear and oscillating load. It was found that, despite the lack of preliminary preparation of MWCN, when their concentration increase the dynamic properties also increase under an oscillating load in highly elastic state. Thus, it is possible to use MWCN producing elastomer materials with improved properties.
About the Authors
N. S. Mitryaeva
Omsk State Technical University; Research and Technology Center of Carbon Materials
Russian Federation
11 Mira Pr., 644050 Omsk; 20 Barabinskaya St, 644049 Omsk
Russian Federation
11 Mira Pr., 644050 Omsk; 20 Barabinskaya St, 644049 Omsk
A. V. Myshlyavtsev
Omsk State Technical University
Russian Federation
Russian Federation
Dr Sc. (Chem)
11 Mira Pr., 644050 Omsk
E. A. Strizhak
Omsk State Technical University; Federal Research and Production Center “Progress”
Russian Federation
Russian Federation
Cand Sc. (Chem)
11 Mira Pr., 644050 Omsk; 45th Kordnaya St, 644018 Omsk
References
1. Tegtmeier, K., et al., Residual rubber shielded multi walled carbon nanotube electrodes for neural interfacing in active medical implants, Physics in Medicine, 2016, V. 1, pp. 8–19.
2. Lorenz, H., et al., Advanced elastomer nano-composites based on CNT-hybrid filler systems, Composites Science and Technology, 2009, V. 69, Issue 13, pp. 2135–2143.
3. Bokobza, L., et al., Blends of carbon blacks and multi wall carbon nanotubes as reinforcing fillers for hydrocarbon rubbers, Journal of Polymer Science. Part B: Polymer Physics, 2008, V. 46, Issue 18, pp. 1939–1951.
4. Bokobza, L., Multiwall carbon nanotube elastomeric composites: A review, Polymer, 2007, V. 48, Issue 17, pp. 4907–4920.
5. Harris, P.J.F., Carbon Nanotubes and Related Structures: New Materials for the 21st Century, New York; Cambridge, 1999.
6. Bose, S., Khare, R.A., Moldenaers, P., Assessing the strengths and weaknesses of various types of pre-treatments of carbon nanotubes on the properties of polymer/carbon nanotubes composites: A critical review, Polymer, 2010, V. 51, Issue 5, pp. 975–993.
7. Payne, A.R., Rubber Plast, Age, 1961, V. 111, pp. 963.
8. Mitryaeva, N.S., Akimenko, S.S., Myshlyavtsev, A.S., Vliyanie smesi mnogostennykh uglerodnykh nanotrubok Dealtom s tekhnicheskim uglerodom na svoistva elastomernogo kompozita [Influence of a mixture of multiwalled carbon nanotubes Dealtom with technical carbon on the properties of elastomeric composite], Kauchuk i rezina, 2017, No 3, pp. 148–151.
9. State Standard GOST P 54554-2011: Smesi rezinovye standartnye. Materialy, oborudovanie, metody smesheniya i prigotovleniya vulkanizovannykh plastin [Rubber standard mixtures. Materials, equipment, methods of mixing and preparing vulcanized plates], Moscow: Standartinform, 2013.
Review
For citations:
Mitryaeva N.S., Myshlyavtsev A.V., Strizhak E.A. Dynamic properties of elastomer composites filled with multiwalled carbon nanotubes. Voprosy Materialovedeniya. 2018;(3(95)):137-145. (In Russ.) https://doi.org/10.22349/1994-6716-2018-95-3-137-145
Views:
273
Email this article 