Preview

Voprosy Materialovedeniya

Advanced search
Open Access Open Access  Restricted Access Subscription Access

Technology for producing composite nanostructured powder for protective coatings

https://doi.org/10.22349/1994-6716-2020-101-1-97-103

Abstract

This article presents the results of the development of technology for producing clad powder and coatings based on it. The possibility of obtaining a clad powder using high-speed mechanosynthesis in disintegrator plants is shown on the example of the Hadfield steel – aluminum powder composition.

About the Authors

E. Yu. Geraschenkova
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation


A. F. Vasiliev
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation


E. A. Samodelkin
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation


B. V. Farmakovsky
NRC “Kurchatov Institute” – CRISM “Prometey”
Russian Federation
Cand Sc. (Eng)


References

1. G e r a s h c h enk o v , D . A ., Razrabotka tekhnologicheskogo protsessa naneseniya pokrytiy metodom kholodnogo gazodinamicheskogo napyleniya na osnove armirovannykh poroshkov sistemy Al–Sn + Al2O3 [Development of a technological process of coating by the method of cold gas-dynamic spraying based on reinforced powders of the Al – Sn + Al2O3 system]: Abstract of thesis for the degree of candidate of sciences in engineering, St Petersburg: CRISM “Prometey”, 2015.

2. G e r a s h ch enko v , D . A . , F a rma k o v sk y, B .V . , V a s i le v , A. F . , A l ma z o v , V . V . , K o b e r ni ch e nko , A . B ., S o mk o v a, E . A . , B ys t r ov , R . Yu . , Patent RU 2 434 713 C2: A method of producing Al-Zn-Sn-Al2O3 system composite powder, Publ. 16.11.2009, Bull. No 33.

3. M o s k v ic h ev , Yu . P . , P an in , V . I . , A la d y i n , A . V . , A g e ev , S . V ., Patent RU 2 434 962 C1: Composite structural material, Publ. 27.11.2011, Bull. No 33.

4. Farmakovsky, B.V., Vasilev, A.F., Samodelkin, E.A., Korkina, M.A., Marennikov, N.V., Patent RU 2 417 136 C1: Method of producing sintered dispersed particles of wear-resistant “metal-non-metal” system. Publ. 27.04.2011, Bull. No 12.

5. B ob kov a , T . I . , F a r ma k o v sk y, B . V . , G e r a s hc h enk ov a, E . Y u . , S a mo d e lk in , E . A . , Kompozitsionnye plakirovannye poroshki dlya naneseniya zashchitnykh pokrytiy [Composite clad powders for protective coatings], Voprosy Materialovedeniya, 2018, No 1 (97), pp. 79–84.

6. G e r a s hc h enk ov , D . A . , O r ys h c he nko , A . S . , Alyumomatrichnye funktsionalnye pokrytiya s vysokoy mikrotverdostyu, poluchennye iz kompozitsionnykh poroshkov sistemy Al-Sn+Al2O3 metodom kholodnogo gazodinamicheskogo napyleniya [High microhardness aluminomatric functional coatings obtained from composite powders of the Al-Sn + Al2O3 system by the method of cold gas-dynamic spraying], Voprosy Materialovedeniya, 2015, No 3 (83), pp. 100–107.

7. G r a c h ev , V . I . , M a r g o l in , V . I. , Z h a b r ev , V . A . , T u p ik , V . A . , Osnovy sinteza nanorazmernykh chastits i plenok [Fundamentals of the synthesis of nanoscale particles and membranes], Izhevsk, Udmurtiya, 2014, p. 480.

8. A l f e rov , Z h . I ., e t a l., Perspektivnye napravleniya razvitiya nauki v Peterburge [Promising areas of science development in St Petersburg], St Petersburg: Permyakov, 2015, pp. 137–163.

9. B ob k o v a , T . I ., Razrabotka materialov i tekhnologii polucheniya iznosostoikikh gradientnykh pokrytii na baze nanostrukturirovannykh kompozitsionnykh poroshkov [Development of materials and technology of wear-resistant gradient coatings obtaining based on nano-constructional composite powders]: Abstract of thesis for the degree of candidate of sciences in engineering, St Petersburg, 2017.


Review

For citations:


Geraschenkova E.Yu., Vasiliev A.F., Samodelkin E.A., Farmakovsky B.V. Technology for producing composite nanostructured powder for protective coatings. Voprosy Materialovedeniya. 2020;(1(101)):97-103. (In Russ.) https://doi.org/10.22349/1994-6716-2020-101-1-97-103

Views: 275


ISSN 1994-6716 (Print)