| |
| Issue |
Title |
| |
| No 3(123) (2025) |
A method of determination of mechanical properties and true stress-strain curve for fuel cladding material by ring specimens testing. Part 1. Analysis of existing methods and development of new ones |
Abstract
|
|
V. N. Fomenko, B. Z. Margolin, F. L. Shishkov |
| |
| No 3(123) (2025) |
A method of determination of mechanical properties and true stress-strain curve for fuel cladding material by ring specimens testing. Part 2. Numerical and experimental verification |
Abstract
|
|
V. N. Fomenko, B. Z. Margolin, F. L. Shishkov |
| |
| No 2(122) (2025) |
Forecasting the parameters of crack resistance of dissimilar welded joints of Du800 MCP and MCP pipelines of WWER-1000 reactor to substantiate the applicability of the “leak before break” concept |
Abstract
|
|
N. V. Vasiliev, M. N. Timofeev, A. S. Shalygin, I. A. Khomich, V. A. Petrov, D. F. Gusev, V. V. Shitov |
| |
| No 4(120) (2024) |
Regarding the application of the local criterion for brittle fracture in order to relate the crack resistance of high-strength steels with the test results of samples with a concentrator and the microstructural characteristics of the material |
Abstract
|
|
A. V. Ilyin, A. A. Lavrentiev, A. V. Mizetsky, K. E. Sadkin |
| |
| No 4(120) (2024) |
An effective method for evaluating highand low-temperature fatigue of structural elements |
Abstract
|
|
O. Yu. Vilensky, D. L. Osetrov, E. Yu. Poverennov |
| |
| No 3(119) (2024) |
Plastic strain effect on cleavage microcracks propagation in probabalistic statement. Part 1. Formulation of the problem and research methods |
Abstract
|
|
B. Z. Margolin, V. N. Fomenko, V. A. Shvetsova, F. L. Shishkov, E. V. Yurchenko |
| |
| No 3(119) (2024) |
Plastic strain effect on cleavage microcracks propagation in probabalistic statement. Part 2. Research results |
Abstract
|
|
B. Z. Margolin, V. N. Fomenko, V. A. Shvetsova, F. L. Shishkov, E. V. Yurchenko |
| |
| No 2(118) (2024) |
Method for determining crack resistance of structural materials at quasi-brittle fracture after stable crack growth |
Abstract
|
|
V. I. Smirnov, A. I. Minkin, B. Z. Margolin |
| |
| No 2(118) (2024) |
Experimental studies and calculation of crack propagation at the nil ductility temperature of shipbuilding steel |
Abstract
|
|
V. Yu. Filin, A. V. Mizetsky, D. R. Barakov, M. M. Peglivanova |
| |
| No 2(118) (2024) |
Development of calculation methods for the uncertainty of special mechanical characteristics of structural steel |
Abstract
|
|
M. M. Peglivanova, V. D. Yunev, V. Yu. Filin |
| |
| No 2(114) (2023) |
Calculation of fatigue damage under cyclic complex loading considering the effect of the strain rate |
Abstract
|
|
B. Z. Margolin, A. G. Gulenko |
| |
| No 1(113) (2023) |
Correlation of fracture toughness with microstructural parameters and standard mechanical properties of high-strength medium-alloy steel |
Abstract
|
|
A. V. Ilyin, A. A. Lavrentiev, G. D. Motovilina, E. V. Zabavicheva, S. N. Petrov |
| |
| No 1(113) (2023) |
Comparative analysis of compressed hydrogen losses during its transportation through the pipelines from different materials |
Abstract
|
|
V. I. Bolobov, A. P. Petkova, G. G. Popov, V. A. Zlotin, I. U. Latipov, A. O. Sherstneva, I. V. Zhuikov |
| |
| No 4(112) (2022) |
Relation between the results of a bending test and the critical deformation of the tested metal |
Abstract
|
|
A. V. Ilyin, A. V. Mizetsky, V. V. Riabov, J. V. Veretennikova |
| |
| No 2(110) (2022) |
On the fatigue strength calculation of the welded shell structures from high-strength steels under low-cycle loading. Part 2: Development of the assessment methodology |
Abstract
|
|
A. V. Ilyin, K. E. Sadkin, N. S. Zabavichev |
| |
| No 4(108) (2021) |
FEM assessment of the procedures providing for a uniform crack shape in specimens for fracture toughness tested in full thickness |
Abstract
|
|
V. Yu. Filin, A. V. Mizetsky, O. P. Vinogradov, K. E. Sadkin, E. D. Nazarova, A. V. Poroshkov, D. A. Pyshkin |
| |
| No 4(108) (2021) |
High-temperature low-cycle fatigue of a heat-resistant alloy of the Co–Cr –Ni–W–Ta system obtained by additive manufacturing |
Abstract
|
|
D. I. Suhov, I. A. Hodinev, S. A. Monin, P. V. Ryzhkov |
| |
| No 3(107) (2021) |
On the fatigue strength calculation of the welded shell structures from high-strength steels under low-cycle loading. Part 1: Estimation at the initial stage of fatigue failure |
Abstract
|
|
A. V. Ilyin, K. E. Sadkin, N. S. Zabavichev |
| |
| No 3(107) (2021) |
Studying changes of limit deformations and mechanical properties of steels of different structure under single and multiple explosive loading |
Abstract
|
|
O. V. Glibenko, T. V. Vikhareva, A. V. Ilyin |
| |
| No 3(107) (2021) |
Promising use of high-strength nitrogen steel for the ice belt of marine machinery operating in the extreme arctic conditions |
Abstract
|
|
A. A. Deev, G. Yu. Kalinin, K. E. Sadkin |
| |
| No 3(107) (2021) |
Titanium alloys for deep marine engineering |
Abstract
|
|
A. S. Oryshchenko, V. P. Leonov, V. I. Mikhaylov |
| |
| No 3(107) (2021) |
Advances in operating capacity and life time of centrifugal cast pipes for high-temperature pyrolysis of NRC “Kurchatov Institute” – CRISM “Prometey” |
Abstract
|
|
A. S. Oryshchenko, I. P. Popova, Yu. A. Utkin, S. N. Petrov |
| |
| No 3(107) (2021) |
Creation of large-scale thin-walled welded panels of high strength from aluminum-magnesium alloys for construction of high-speed vessels of a new type for operation in the Arctic |
Abstract
|
|
E. A. Alifirenko, N. N. Barakhtina, E. V. Malov |
| |
| No 4(104) (2020) |
FEM assessment of the local side compression technique efficiency as applicable for notched prismatic specimens |
Abstract
|
|
K. E. Sadkin, V. Yu. Filin, A. V. Mizetsky, E. D. Nazarova |
| |
| No 3(103) (2020) |
On the definition of the local brittle fracture criterion to predict the crack resistance of high-strength steel |
Abstract
|
|
A. V. Ilyin, A. A. Lavrentiev, A. V. Mizetsky |
| |
| No 4(100) (2019) |
Comparative analysis and verification of engineering methods of shallow cracks effect for fracture toughness prediction for reactor pressure vessels |
Abstract
|
|
V. I. Kostylev, B. Z. Margolin |
| |
| No 3(99) (2019) |
Resistance of high-strength medium-alloy steel to brittle fracture and its connection with structural state parameters |
Abstract
|
|
S. A. Golosienko, A. V. Il'in, A. A. Lavrentiev, M. S. Mikhailov, G. D. Motovilina, S. N. Petrov, K. E. Sadkin |
| |
| No 3(99) (2019) |
On corrosion damage and its connection with non-metal inclusions in elements of pipe metal structures of NPP |
Abstract
|
|
A. S. Mitrofanov, Ye. A. Krainyuk, S. V. Gozhenko, V. N. Voyevodin, R. L. Vasilenko |
| |
| No 2(98) (2019) |
Evaluation of crack resistance of 38KhN3MFA-Sh structural steel by fracture properties and elastic wave velocities |
Abstract
|
|
V. V. Evstifeeva, V. N. Litovchenko, V. V. Mishakin, R. A. Vorobyev |
| |
| No 2(98) (2019) |
Quality control of steel for large-sized welded structures of Arctic shelf. Application of Russian and foreign requirements |
Abstract
|
|
V. Yu. Filin |
| |
| No 4(96) (2018) |
Basic principles for structural integrity and lifetime assessment of BN-type fast reactors components with regard for material degradation |
Abstract
|
|
B. Z. Margolin, A. G. Gulenko, A. A. Buchatsky, A. A. Sorokin, O. Yu. Vilensky, B. A. Vasilev |
| |
| No 3(87) (2016) |
Estimating consequences of a fall of a container with a steam generator onto a platform of the rotating reactor roof in the BN-1200 |
Abstract
|
|
O. Yu. Vilensky, D. A. Lapshin, M. G. Malyguin |
| |
| 1 - 32 of 32 Items |
|
